SAF Stub Forwarder Configuration Example

From DocWiki

Revision as of 21:53, 4 June 2010 by Dalin (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Contents

Introduction

Similar to EIGRP stub routing, the SAF stub feature helps improve scalability and network stability by allowing stub networks to learn services while advertising either (1) locally published services or (2) no services at all.

The configuration examples below demonstrate how to configure SAF stub forwarders that both learn services while one advertises locally published services and the other no services at all.

Topology/Configuration

Saf stub forwarder.jpg


Related show Command

To verify that a remote router has been configured as a SAF forwarder with the SAF stub feature, use the show ip eigrp service-family ipv4 neighbor detail command from the distribution router in privileged EXEC mode. The last line of the output will show the stub status of the remote or spoke router.

The following example output is from the show ip eigrp service-family ipv4 neighbor detail command:

Example:

Sh eigrp service-family ipv4 neighbor detail.jpg


Related Information

Technical Support & Documentation - Cisco Systems SAF Product Page - Cisco Systems Cisco IOS SAF Configuration Guide - Cisco Systems

Rating: 0.0/5 (0 votes cast)

Personal tools