SAF Forwarder with L2 Adjacency Configuration Example
From DocWiki
Contents |
Introduction
This configuration example demonstrates how to configure SAF Forwarders that share a common multiaccess segment. Although this example relies on the use of an EIGRP instance, EIGRP as a routing protocol is not required in order for SAF to operate. This is because SAF is responsible for advertising services and not IP prefixes. This means any routing protocol may run with SAF, for example, static, RIP, EIGRP, OSPF and BGP.
Example Topology
Related show Commands
show eigrp service-family [ipv4|ipv6] neighbors
Related Information
Technical Support & Documentation - Cisco Systems SAF Product Page - Cisco Systems Cisco IOS SAF Configuration Guide - Cisco Systems
