SAF Forwarder with L2 Adjacency Configuration Example

From DocWiki

(Difference between revisions)
Jump to: navigation, search
(New page: {{Template:Required Metadata}} ==Introduction== This configuration example demonstrates how to configure SAF Forwarders that share a common multiaccess segment. Although this example rel...)
Line 8: Line 8:
This means any routing protocol may run with SAF, for example, static, RIP, EIGRP, OSPF and BGP.
This means any routing protocol may run with SAF, for example, static, RIP, EIGRP, OSPF and BGP.
-
==Example Topology==
+
==Example==
[[Image:Saff_l2.jpg]]
[[Image:Saff_l2.jpg]]

Revision as of 22:06, 4 June 2010

Contents

Introduction

This configuration example demonstrates how to configure SAF Forwarders that share a common multiaccess segment. Although this example relies on the use of an EIGRP instance, EIGRP as a routing protocol is not required in order for SAF to operate. This is because SAF is responsible for advertising services and not IP prefixes. This means any routing protocol may run with SAF, for example, static, RIP, EIGRP, OSPF and BGP.

Example

Saff l2.jpg


Related show Commands

show eigrp service-family [ipv4|ipv6] neighbors


Related Information

Technical Support & Documentation - Cisco Systems SAF Product Page - Cisco Systems Cisco IOS SAF Configuration Guide - Cisco Systems

Rating: 0.0/5 (0 votes cast)

Personal tools