RmCm remains in Initializing state
From DocWiki
(Difference between revisions)
(→RmCm remains in Initializing state) |
Docwikibot (Talk | contribs) m (Bot: Adding {{Template:Required Metadata}}) |
||
| (One intermediate revision not shown) | |||
| Line 1: | Line 1: | ||
| + | {{Template:Required Metadata}} | ||
== RmCm remains in Initializing state == | == RmCm remains in Initializing state == | ||
Latest revision as of 18:35, 18 December 2009
RmCm remains in Initializing state
| Problem Summary | The RmCm subsystem remains in the Initializing state after the Cisco Unified CCX Engine starts. |
|---|---|
| Error Message | None. |
| Possible Cause | The RmCm subsystem is unable to read any configuration information. |
| Recommended Action |
Make sure there is at least one "Cisco Unified CCX SQL Server - Config" service running in the cluster. If the service is stopped, start it. |
| Release | Release 7.0(1) |
| Associated CDETS # | None. |
