Required Log levels For HRC

From DocWiki

(Difference between revisions)
Jump to: navigation, search
(New page: == Required Log levels == {| border="1" |- ! '''Problem Summary''' | What logs should be enabled before debugging a HRC problem? |- ! '''Error Message''' | NA |- ! '''Possible Cause''' | ...)
m (1 revision)
 
(One intermediate revision not shown)
Line 27: Line 27:
|-
|-
! '''Release'''
! '''Release'''
-
| Release 8.0(1)
+
| Release 7.0(1),Release 8.0, Release 8.5
|-
|-
! '''Associated CDETS #'''
! '''Associated CDETS #'''
Line 33: Line 33:
|-
|-
|}
|}
 +
 +
 +
[[Category:Unified CCX, Release 7.0]]
 +
[[Category:Unified CCX, Release 8.0]]
 +
[[Category:Unified CCX, Release 8.5]]

Latest revision as of 06:07, 3 March 2011

Required Log levels

Problem Summary What logs should be enabled before debugging a HRC problem?
Error Message NA
Possible Cause NA
Recommended Action While escalating issues to DE, please set the following log levels in the file hrcConfig.ini. This is generally available under the folder where Historical Reporting Client is installed. On a windows system, [assuming HRC is installed on the C: drive] it would be 'C:\Program Files\Cisco UCCX Historical Reports'.

Log Levels while escalating issues to DE are

logLevel=5 
 Note - Once a new log level is set, HRC has to be relaunched for the logs level to take effect.

Logs should be collected from 'C:\Program Files\Cisco UCCX Historical Reports\logs'. Log levels have to be reverted to level 1, for HRC to perform optimally.

Release Release 7.0(1),Release 8.0, Release 8.5
Associated CDETS #

Rating: 0.0/5 (0 votes cast)

Retrieved from "http://docwiki.cisco.com/wiki/Required_Log_levels_For_HRC"
Personal tools