Reduced call completion rate under heavy load while using an MRCP ASR Group

From DocWiki

(Difference between revisions)
Jump to: navigation, search
m (1 revision)
m (Bot: Adding {{Template:Required Metadata}})
 
Line 1: Line 1:
 +
{{Template:Required Metadata}}
== Reduced call completion rate under heavy load while using an MRCP ASR Group ==
== Reduced call completion rate under heavy load while using an MRCP ASR Group ==

Latest revision as of 18:33, 18 December 2009

Reduced call completion rate under heavy load while using an MRCP ASR Group

Problem Summary Under heavy load, calls that utilize a channel from an MRCP ASR Dialog Control Group, can have a reduced call completion rate.
Error Message None.
Possible Cause The MRCP channels utilized by calls can take some additional time to clean up all the sessions set up with MRCP resources.
Recommended Action

Overprovision MRCP ASR Dialog Control Groups by a factor of 1.2 or by an additional 20 percent. For example, if your application requires 100 MRCP ASR channels, then configure 120 MRCP ASR channels. Complete the following steps:

  1. Select Subsystems > MRCP ASR > MRCP ASR Provider Configuration.
  2. Click the MRCP ASR Dialog Groups link on the left panel.
  3. Either click the Add MRCP ASR Dialog Control Group link or select an existing group.
  4. Modify the value of Max.Number of Sessions as prescribed above. Overprovision this value by a factor of 1.2 or by an additional 20 percent.
  5. Click Update or Add as appropriate.
Release Release 7.0(1)
Associated CDETS # None.

Rating: 0.0/5 (0 votes cast)

Retrieved from "http://docwiki.cisco.com/wiki/Reduced_call_completion_rate_under_heavy_load_while_using_an_MRCP_ASR_Group"
Personal tools