Recording: CUBE disconnects Cisco MediaSense right after recording begins
From DocWiki
(Difference between revisions)
(Created page with "== CUBE disconnects Cisco MediaSense right after recording begins == {| border="1" |- ! '''Problem Summary''' | CUBE sends BYE to MediaSense while call is still active.<br>Onl...") |
m (1 revision) |
Revision as of 18:43, 30 April 2012
CUBE disconnects Cisco MediaSense right after recording begins
| Problem Summary | CUBE sends BYE to MediaSense while call is still active. Only the brief beginning of the call gets recorded. |
|---|---|
| Error Message | Call Control Service log contains BYE request from CUBE with “Reason: Q.850;cause=102” header |
| Possible Cause | See CSCtz41118. CUBE terminates the forked media because it inappropriately detects media inactivity from MediaSense. |
| Recommended Action | For now, disable RTP and RTCP media inactivity timers in IOS. Once CSCtz41118 is resolved in a version of IOS which is supported by MediaSense, upgrade your version of IOS and re-enable media inactivity timers if desired. |
| Release | Release 8.5(4) |
| Associated CDETS # | CSCtz41118 |
