Ppp multilink

From DocWiki

Revision as of 22:39, 3 June 2010 by Cdefranc (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Contents

Introduction

Design

router1(T1's)===========(T's)router2

Configuration

interface multilink 1 ip address x.x.x.x y.y.y.y ppp multilink ppp multilink-group 1

(Then bind the serial interfaces, like this:)

interface serial 0 no ip address encap ppp ppp multilink ppp multilink-group 1


interface serial 1 no ip address encap ppp ppp multilink ppp multilink-group 1


Another Example

Sample 2

interface Multilink1

ip address 38.118.131.254 255.255.255.252 
no cdp enable
encapsulation ppp
no ip route-cache
no ip mroute-cache
no ip route-cache cef
no ppp multilink fragmentation
no fair-queue
ppp multilink group 1
ppp multilink

! interface Serial0/0

no ip address
no cdp enable
encapsulation ppp
no ip route-cache
no ip mroute-cache
no ip route-cache cef
no fair-queue
ppp multilink group 1
ppp multilink

! interface Serial0/1

no ip address
no cdp enable
encapsulation ppp
no ip route-cache 
no ip mroute-cache
no ip route-cache cef
no fair-queue
ppp multilink group 1
ppp multilink


show interface multilink1 show ppp multilink interface multilink1


Related Information

Technical Support & Documentation - Cisco Systems

show interface multilink1 show ppp multilink interface multilink1

Rating: 3.0/5 (2 votes cast)

Personal tools