Outbound QoS policy generic example
From DocWiki
Revision as of 19:31, 2 February 2011 by Frankpetzold (Talk | contribs)
Contents |
Introduction
Outbound Qos policy. This is an generic example of outbound QoS policy matching the tarffic using different dscp bits
Design
LAN======router->--Internet
Configuration
access-list 100 permit icmp any any echo access-list 100 permit icmp any any echo-reply ! class-map match-any ef-traffic match dscp ef match access-group 100 class-map match-all af21-traffic match dscp af21 class-map match-all af31-traffic match dscp af31 class-map match-all af11-traffic match dscp af11 class-map match-all cs1-traffic match dscp cs1 class-map match-all class-default match any ! policy-map llq-policy class ef-traffic priority 168 class af31-traffic bandwidth remaining percent 40 class af21-traffic bandwidth remaining percent 20 class af11-traffic bandwidth remaining percent 13 class cs1-traffic bandwidth remaining percent 2 class class-default bandwidth remaining percent 25 ! interface Serial0/1/0 service-policy output llq-policy
Related show Commands
show access-lists; show class-map; show policy-map interface serial 0/1/0
