Outbound QoS policy generic example
From DocWiki
Contents |
Introduction
Outbound Qos policy. This is an genric example of outbound QoS policy matching the tarffic using different dscp bits
Design
LAN======router->--Internet
Configuration
access-list 100 permit icmp any any echo access-list 100 permit icmp any any echo-reply ! class-map match-any ef-traffic
match dscp ef match access-group 100
class-map match-all af21-traffic
match dscp af21
class-map match-all af31-traffic
match dscp af31
class-map match-all af11-traffic
match dscp af11
class-map match-all cs1-traffic
match dscp cs1
class-map match-all class-default
match any
! policy-map llq-policy
class ef-traffic priority 168 class af31-traffic bandwidth remaining percent 40 class af21-traffic bandwidth remaining percent 20 class af11-traffic bandwidth remaining percent 13 class cs1-traffic bandwidth remaining percent 2 class class-default bandwidth remaining percent 25
! interface Serial0/1/0
service-policy output llq-policy
Related show Commands
show access-lists show class-map show policy-map interface serial 0/1/0
