Outbound QoS policy generic example

From DocWiki

Revision as of 23:05, 3 June 2010 by Sakella (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Contents

Introduction

Outbound Qos policy. This is an genric example of outbound QoS policy matching the tarffic using different dscp bits

Design

LAN======router->--Internet

Configuration

access-list 100 permit icmp any any echo access-list 100 permit icmp any any echo-reply ! class-map match-any ef-traffic

match  dscp ef
match access-group 100

class-map match-all af21-traffic

match  dscp af21

class-map match-all af31-traffic

match  dscp af31

class-map match-all af11-traffic

match  dscp af11

class-map match-all cs1-traffic

match  dscp cs1

class-map match-all class-default

match any

! policy-map llq-policy

class ef-traffic
 priority 168
class af31-traffic
 bandwidth remaining percent 40
class af21-traffic
 bandwidth remaining percent 20
class af11-traffic
 bandwidth remaining percent 13
class cs1-traffic
 bandwidth remaining percent 2
class class-default
 bandwidth remaining percent 25

! interface Serial0/1/0

service-policy output llq-policy

Related show Commands

show access-lists show class-map show policy-map interface serial 0/1/0

Show running-config

Related Information

http://www.cisco.com/en/US/docs/ios/qos/configuration/guide/nbar_mqc_ps6350_TSD_Products_Configuration_Guide_Chapter.html#wp1055125

Rating: 5.0/5 (2 votes cast)

Personal tools