Outbound QoS policy generic example

From DocWiki

(Difference between revisions)
Jump to: navigation, search
(Configuration)
(Related show Commands)
Line 47: Line 47:
==Related show Commands==
==Related show Commands==
-
show access-lists;
+
show access-lists;
-
show class-map;
+
show class-map;
-
show policy-map interface serial 0/1/0
+
show policy-map interface serial 0/1/0
-
 
+
-
 
+
==Related Information==
==Related Information==

Revision as of 19:30, 2 February 2011

Contents

Introduction

Outbound Qos policy. This is an genric example of outbound QoS policy matching the tarffic using different dscp bits

Design

LAN======router->--Internet

Configuration

access-list 100 permit icmp any any echo
access-list 100 permit icmp any any echo-reply
!
class-map match-any ef-traffic
 match  dscp ef
 match access-group 100
class-map match-all af21-traffic
 match  dscp af21
class-map match-all af31-traffic
 match  dscp af31
class-map match-all af11-traffic
 match  dscp af11
class-map match-all cs1-traffic
 match  dscp cs1
class-map match-all class-default
 match any
!
policy-map llq-policy
 class ef-traffic
  priority 168
 class af31-traffic
  bandwidth remaining percent 40
 class af21-traffic
  bandwidth remaining percent 20
 class af11-traffic
  bandwidth remaining percent 13
 class cs1-traffic
  bandwidth remaining percent 2
 class class-default
  bandwidth remaining percent 25
!
interface Serial0/1/0
 service-policy output llq-policy

Related show Commands

show access-lists;
show class-map;
show policy-map interface serial 0/1/0

Related Information

http://www.cisco.com/en/US/docs/ios/qos/configuration/guide/nbar_mqc_ps6350_TSD_Products_Configuration_Guide_Chapter.html#wp1055125

Rating: 5.0/5 (2 votes cast)

Personal tools