Outbound QoS policy generic example

From DocWiki

Revision as of 19:29, 2 February 2011 (view source) Frankpetzold (Talk | contribs) (→Configuration) ← Older edit		Revision as of 19:30, 2 February 2011 (view source) Frankpetzold (Talk | contribs) (→Configuration) Newer edit →
Line 29:		Line 29:
	match any		match any
	!		!
-	policy-map llq-policy	+	policy-map llq-policy
-	class ef-traffic	+	class ef-traffic
-	priority 168	+	priority 168
-	class af31-traffic	+	class af31-traffic
-	bandwidth remaining percent 40	+	bandwidth remaining percent 40
-	class af21-traffic	+	class af21-traffic
-	bandwidth remaining percent 20	+	bandwidth remaining percent 20
-	class af11-traffic	+	class af11-traffic
-	bandwidth remaining percent 13	+	bandwidth remaining percent 13
-	class cs1-traffic	+	class cs1-traffic
-	bandwidth remaining percent 2	+	bandwidth remaining percent 2
-	class class-default	+	class class-default
-	bandwidth remaining percent 25	+	bandwidth remaining percent 25
-	!	+	!
-	interface Serial0/1/0	+	interface Serial0/1/0
-	service-policy output llq-policy	+	service-policy output llq-policy
	==Related show Commands==		==Related show Commands==

---

Revision as of 19:30, 2 February 2011

Contents 1 Introduction 2 Design 3 Configuration 4 Related show Commands 5 Related Information

Introduction

Outbound Qos policy. This is an genric example of outbound QoS policy matching the tarffic using different dscp bits

Design

LAN======router->--Internet

Configuration

access-list 100 permit icmp any any echo
access-list 100 permit icmp any any echo-reply
!
class-map match-any ef-traffic
 match  dscp ef
 match access-group 100
class-map match-all af21-traffic
 match  dscp af21
class-map match-all af31-traffic
 match  dscp af31
class-map match-all af11-traffic
 match  dscp af11
class-map match-all cs1-traffic
 match  dscp cs1
class-map match-all class-default
 match any
!
policy-map llq-policy
 class ef-traffic
  priority 168
 class af31-traffic
  bandwidth remaining percent 40
 class af21-traffic
  bandwidth remaining percent 20
 class af11-traffic
  bandwidth remaining percent 13
 class cs1-traffic
  bandwidth remaining percent 2
 class class-default
  bandwidth remaining percent 25
!
interface Serial0/1/0
 service-policy output llq-policy

Related show Commands

show access-lists; show class-map; show policy-map interface serial 0/1/0

Related Information

http://www.cisco.com/en/US/docs/ios/qos/configuration/guide/nbar_mqc_ps6350_TSD_Products_Configuration_Guide_Chapter.html#wp1055125