ONS SDH TL1 Command Guide R8.5.1 -- APPLY Commands

From DocWiki

Revision as of 03:56, 10 February 2009 by Pzimmerm (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This chapter provides apply (APPLY) commands for the Cisco ONS 15454 SDH and Cisco ONS 15600 SDH.

Contents

APPLY

(Cisco ONS 15454 SDH and ONS 15600 SDH) The Apply (APPLY) command activates or reverts a software load during a software upgrade or downgrade process.

Usage Guidelines

An error will be generated if you attempt to activate an older software load or attempt to revert to a newer software load.

Category

File Transfer

Security

Superuser

Input Format

APPLY:[<TID>]::<CTAG>[::<MEM_SW_TYPE>];

Input Example

APPLY:CISCO::123::ACT;

Input Parameters

<MEM_SW_TYPE>

(Optional) Memory switch action during the software upgrade. The parameter type is DL_TYPE, which indicates the software download type.

  • ACCEPT

Activates to a newer software load during the software download.

  • CANCEL

Cancel the software download.

Rating: 0.0/5 (0 votes cast)

Personal tools