Megsunda at 10:31, 10 January 2009

2009-01-10T10:31:42Z

New page

This chapter explains how to modify node provisioning for the Cisco ONS 15454 SDH. To provision a new node, see [[ONS 15454 SDH Procedure Guide R8.5.1 -- Turn Up a Node#Turn Up a Node|Turn Up a Node]]. To change default network element (NE) settings and to view a list of those settings, refer to the "Network Element Defaults" appendix in the ''Cisco ONS 15454 SDH Reference Manual''.

== Before You Begin ==

Before performing the following procedures, investigate all alarms and clear any trouble conditions. Refer to the ''Cisco ONS 15454 SDH Troubleshooting Guide'' as necessary.

This section lists the chapter procedures (NTPs). Turn to a procedure for applicable tasks (DLPs).
# [[ONS 15454 SDH Procedure Guide R8.5.1 -- Change Node Settings#NTP-D81 Change Node Management Information|NTP-D81 Change Node Management Information]]-As needed, complete this procedure to change the node name, contact information, latitude, longitude, date, time, and login legal disclaimer.
# [[ONS 15454 SDH Procedure Guide R8.5.1 -- Change Node Settings#NTP-D201 Change CTC Network Access|NTP-D201 Change CTC Network Access]]-As needed, complete these procedures to change the IP address, default router, subnet mask, network configuration settings, and static routes.
# [[ONS 15454 SDH Procedure Guide R8.5.1 -- Change Node Settings#NTP-D327 Modify OSI Provisioning|NTP-D327 Modify OSI Provisioning]]-Complete this procedure as needed to modify Open System Interconnection (OSI) parameters including the OSI routing mode, Target Identifier Address Resolution Protocol (TARP), routers, subnets, and IP-over-CLNS tunnels.
# [[ONS 15454 SDH Procedure Guide R8.5.1 -- Change Node Settings#NTP-D202 Customize the CTC Network View|NTP-D202 Customize the CTC Network View]]-As needed, complete this procedure to create domains and customize the appearance of the network map, including specifying a different default map, creating domains, selecting your own map or image, and changing the background color.
# [[ONS 15454 SDH Procedure Guide R8.5.1 -- Change Node Settings#NTP-D203 Modify or Delete Card Protection Settings|NTP-D203 Modify or Delete Card Protection Settings]]-Complete as needed.
# [[ONS 15454 SDH Procedure Guide R8.5.1 -- Change Node Settings#NTP-D277 Modify or Delete Communications Channel Terminations|NTP-D277 Modify or Delete Communications Channel Terminations]]-Complete as needed to modify or delete regenerator section data communications channel (RS-DCC) and multiplex section data communications channel (MS-DCC) terminations, and to delete provisionable patchcords.
# [[ONS 15454 SDH Procedure Guide R8.5.1 -- Change Node Settings#NTP-D85 Change Node Timing|NTP-D85 Change Node Timing]]-Complete as needed.
# [[ONS 15454 SDH Procedure Guide R8.5.1 -- Change Node Settings#NTP-D205 Modify Users and Change Security|NTP-D205 Modify Users and Change Security]]-Complete as needed.
# [[ONS 15454 SDH Procedure Guide R8.5.1 -- Change Node Settings#NTP-D87 Change SNMP Settings|NTP-D87 Change SNMP Settings]]-Complete as needed.

== NTP-D81 Change Node Management Information ==

{| border = 1
|-
|

'''Purpose'''
|

This procedure changes the node name, date, time, contact information, or the login legal disclaimer.
|-
|

'''Tools/Equipment'''
|

None
|-
|

'''Prerequisite Procedures'''
|

[[ONS 15454 SDH Procedure Guide R8.5.1 -- Turn Up a Node#NTP-D316 Set Up Name, Date, Time, and Contact Information|NTP-D316 Set Up Name, Date, Time, and Contact Information]]
|-
|

'''Required/As Needed'''
|

As needed
|-
|

'''Onsite/Remote'''
|

Onsite or remote
|-
|

'''Security Level'''
|

Superuser only
|}

# Complete the [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D1 to D99#DLP-D60 Log into CTC|"DLP-D60 Log into CTC"]] task at the node where you want to change the settings. If you are already logged in, continue with Step 2.
# Complete the [[ONS 15454 SDH Procedure Guide R8.5.1 -- Maintain the Node#NTP-D108 Back Up the Database|NTP-D108 Back Up the Database]].
# In the node view, click the '''Provisioning > General '''tabs.
# Complete the [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D100 to D199#DLP-D140 Change the Node Name, Date, Time, and Contact Information|"DLP-D140 Change the Node Name, Date, Time, and Contact Information"]] task.
# Complete the [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D200 to D299#DLP-D265 Change the Login Legal Disclaimer|"DLP-D265 Change the Login Legal Disclaimer"]] task, as needed.
# After confirming the changes, complete the [[ONS 15454 SDH Procedure Guide R8.5.1 -- Maintain the Node#NTP-D108 Back Up the Database|NTP-D108 Back Up the Database]].
#: '''Stop. You have completed this procedure.'''

== NTP-D201 Change CTC Network Access ==

{| border = 1
|-
|

'''Purpose'''
|

This procedure changes essential network information, including IP settings, static routes, and OSPF options.
|-
|

'''Tools/Equipment'''
|

None
|-
|

'''Prerequisite Procedures'''
|

[[ONS 15454 SDH Procedure Guide R8.5.1 -- Turn Up a Node#NTP-D169 Set Up CTC Network Access|NTP-D169 Set Up CTC Network Access]]
|-
|

'''Required/As Needed'''
|

As needed
|-
|

'''Onsite/Remote'''
|

Onsite or remote
|-
|

'''Security Level'''
|

Superuser only
|}

'''Note: ''' Additional ONS 15454 SDH networking information and procedures, including IP addressing examples, static route scenarios, Open Shortest Path First (OSPF) protocol, and routing information protocol options are provided in the "Management Network Connectivity" chapter of the ''Cisco ONS 15454 SDH Reference Manual''.

# Complete the [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D1 to D99#DLP-D60 Log into CTC|"DLP-D60 Log into CTC"]] task. If you are already logged in, continue with Step 2.
# Complete the [[ONS 15454 SDH Procedure Guide R8.5.1 -- Maintain the Node#NTP-D108 Back Up the Database|NTP-D108 Back Up the Database]].
# Perform any of the following tasks as needed:
#* [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D200 to D299#DLP-D266 Change IP Settings|DLP-D266 Change IP Settings]]
#* [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D100 to D199#DLP-D142 Modify a Static Route|DLP-D142 Modify a Static Route]]
#* [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D100 to D199#DLP-D143 Delete a Static Route|DLP-D143 Delete a Static Route]]
#* [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D100 to D199#DLP-D100 Delete a Proxy Tunnel|DLP-D100 Delete a Proxy Tunnel]]
#* [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D100 to D199#DLP-D101 Delete a Firewall Tunnel|DLP-D101 Delete a Firewall Tunnel]]
#* [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D100 to D199#DLP-D144 Disable OSPF|DLP-D144 Disable OSPF]]
#* [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D1 to D99#DLP-D85 Lock Node Security|DLP-D85 Lock Node Security]]
#* [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D1 to D99#DLP-D86 Modify MIC-C/T/P Port IP Settings in Secure Mode|DLP-D86 Modify MIC-C/T/P Port IP Settings in Secure Mode]]
#* [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D1 to D99#DLP-D87 Disable Node Security Mode|DLP-D87 Disable Node Security Mode]]
# Complete the [[ONS 15454 SDH Procedure Guide R8.5.1 -- Maintain the Node#NTP-D108 Back Up the Database|NTP-D108 Back Up the Database]].
#: '''Stop. You have completed this procedure.'''

== NTP-D327 Modify OSI Provisioning ==

{| border = 1
|-
|

'''Purpose'''
|

This procedure modifies the ONS 15454 OSI parameters including the OSI routing mode, TARP, routers, subnets, and IP-over-CLNS tunnels.
|-
|

'''Tools/Equipment'''
|

None
|-
|

'''Prerequisite Procedures'''
|

[[ONS 15454 SDH Procedure Guide R8.5.1 -- Turn Up a Node#NTP-D326 Provision OSI|NTP-D326 Provision OSI]]
|-
|

'''Required/As Needed'''
|

As needed
|-
|

'''Onsite/Remote'''
|

Onsite or remote
|-
|

'''Security Level'''
|

Provisioning or higher
|}

'''Note: ''' Additional information about the ONS 15454 implementation of OSI is provided in the "Management Network Connectivity" chapter of the ''Cisco ONS 15454 SDH Reference Manual''.

# Complete the [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D1 to D99#DLP-D60 Log into CTC|"DLP-D60 Log into CTC"]] task. If you are already logged in, continue with Step 2.
# Complete the [[ONS 15454 SDH Procedure Guide R8.5.1 -- Maintain the Node#NTP-D108 Back Up the Database|NTP-D108 Back Up the Database]].
# Perform any of the following tasks as needed:
#* [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D100 to D199#DLP-D166 Provision or Modify TARP Operating Parameters|DLP-D166 Provision or Modify TARP Operating Parameters]]
#* [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D100 to D199#DLP-D167 Add a Static TID-to-NSAP Entry to the TARP Data Cache|DLP-D167 Add a Static TID-to-NSAP Entry to the TARP Data Cache]]
#* [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D100 to D199#DLP-D168 Remove a Static TID to NSAP Entry from the TARP Data Cache|DLP-D168 Remove a Static TID to NSAP Entry from the TARP Data Cache]]
#* [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D100 to D199#DLP-D169 Add a TARP Manual Adjacency Table Entry|DLP-D169 Add a TARP Manual Adjacency Table Entry]]
#* [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D100 to D199#DLP-D175 Remove a TARP Manual Adjacency Table Entry|DLP-D175 Remove a TARP Manual Adjacency Table Entry]]
#* [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D100 to D199#DLP-D178 Change the OSI Routing Mode|DLP-D178 Change the OSI Routing Mode]]
#* [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D100 to D199#DLP-D179 Edit the OSI Router Configuration|DLP-D179 Edit the OSI Router Configuration]]
#* [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D100 to D199#DLP-D180 Edit the OSI Subnetwork Point of Attachment|DLP-D180 Edit the OSI Subnetwork Point of Attachment]]
#* [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D100 to D199#DLP-D181 Edit an IP-Over-CLNS Tunnel|DLP-D181 Edit an IP-Over-CLNS Tunnel]]
#* [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D100 to D199#DLP-D182 Delete an IP-Over-CLNS Tunnel|DLP-D182 Delete an IP-Over-CLNS Tunnel]]
# Complete the [[ONS 15454 SDH Procedure Guide R8.5.1 -- Maintain the Node#NTP-D108 Back Up the Database|NTP-D108 Back Up the Database]].
#: '''Stop. You have completed this procedure.'''

== NTP-D202 Customize the CTC Network View ==

{| border = 1
|-
|

'''Purpose'''
|

This procedure modifies the CTC network view, including grouping nodes into domains for a less-cluttered display, changing the network view background color, and using a custom image for the network view background.
|-
|

'''Tools/Equipment'''
|

None
|-
|

'''Prerequisite Procedures'''
|

None
|-
|

'''Required/As needed'''
|

As needed
|-
|

'''Onsite/Remote'''
|

Onsite or remote
|-
|

'''Security Level'''
|

Provisioning or higher
|}

# Complete the [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D1 to D99#DLP-D60 Log into CTC|"DLP-D60 Log into CTC"]] task. If you are already logged in, continue with Step 2.
# Complete the following tasks, as needed:
#* [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D100 to D199#DLP-D145 Change the Network View Background Color|DLP-D145 Change the Network View Background Color]]
#* [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D400 to D499#DLP-D435 Change the Default Network View Background Map|DLP-D435 Change the Default Network View Background Map]]
#* [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D200 to D299#DLP-D268 Apply a Custom Network View Background Map|DLP-D268 Apply a Custom Network View Background Map]]
#* [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D100 to D199#DLP-D148 Create Domain Icons|DLP-D148 Create Domain Icons]]
#* [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D100 to D199#DLP-D149 Manage Domain Icons|DLP-D149 Manage Domain Icons]]
#* [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D300 to D399#DLP-D393 Switch Between TDM and DWDM Network Views|DLP-D393 Switch Between TDM and DWDM Network Views]]
#* [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D200 to D299#DLP-D269 Enable Dialog Box Do-Not-Display Option|DLP-D269 Enable Dialog Box Do-Not-Display Option]]
#* [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D200 to D299#DLP-D215 Consolidate Links in Network View|DLP-D215 Consolidate Links in Network View]]
#: '''Stop. You have completed this procedure.'''

== NTP-D203 Modify or Delete Card Protection Settings ==

{| border = 1
|-
|

'''Purpose'''
|

This procedure modifies or deletes card protection settings.
|-
|

'''Tools/Equipment'''
|

None
|-
|

'''Prerequisite Procedures'''
|

[[ONS 15454 SDH Procedure Guide R8.5.1 -- Turn Up a Node#NTP-D170 Create Protection Groups|NTP-D170 Create Protection Groups]]
|-
|

'''Required/As Needed'''
|

As needed
|-
|

'''Onsite/Remote'''
|

Onsite or remote
|-
|

'''Security Level'''
|

Provisioning or higher
|}

'''Caution! ''' Modifying and deleting protection groups can be service affecting.

# Compete the [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D1 to D99#DLP-D60 Log into CTC|"DLP-D60 Log into CTC"]] task. If you are already logged in, continue with Step 2.
# Complete the [[ONS 15454 SDH Procedure Guide R8.5.1 -- Maintain the Node#NTP-D108 Back Up the Database|NTP-D108 Back Up the Database]].
# Perform any of the following tasks as needed:
#* [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D100 to D199#DLP-D150 Modify a 1:1 Protection Group|DLP-D150 Modify a 1:1 Protection Group]]
#* [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D100 to D199#DLP-D152 Modify a 1:N Protection Group|DLP-D152 Modify a 1:N Protection Group]]
#* [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D100 to D199#DLP-D154 Modify a 1+1 Protection Group|DLP-D154 Modify a 1+1 Protection Group]]
#* [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D100 to D199#DLP-D155 Delete a Protection Group|DLP-D155 Delete a Protection Group]]
# Complete the [[ONS 15454 SDH Procedure Guide R8.5.1 -- Maintain the Node#NTP-D108 Back Up the Database|NTP-D108 Back Up the Database]].
#: '''Stop. You have completed this procedure.'''

== NTP-D277 Modify or Delete Communications Channel Terminations ==

{| border = 1
|-
|

'''Purpose'''
|

This procedure changes or deletes RS-DCC or MS-DCC terminations on the ONS 15454 SDH.
|-
|

'''Tools/Equipment'''
|

None
|-
|

'''Prerequisite Procedures'''
|

[[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D300 to D399#DLP-D363 Provision Regenerator-Section DCC Terminations|DLP-D363 Provision Regenerator-Section DCC Terminations]]

[[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D300 to D399#DLP-D364 Provision Multiplex-Section DCC Terminations|DLP-D364 Provision Multiplex-Section DCC Terminations]]
|-
|

'''Required/As Needed'''
|

As needed
|-
|

'''Onsite/Remote'''
|

Onsite or remote
|-
|

'''Security Level'''
|

Provisioning or higher
|}

# Complete the [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D1 to D99#DLP-D60 Log into CTC|"DLP-D60 Log into CTC"]] task. If you are already logged in, continue with Step 2.
# Click the '''Provisioning > Comm Channels''' tabs.
# Complete the following tasks to modify communication channel terminations, as needed:
#* [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D300 to D399#DLP-D359 Change a Regenerator-Section DCC Termination|DLP-D359 Change a Regenerator-Section DCC Termination]].
#* [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D300 to D399#DLP-D358 Change a Multiplex-Section DCC Termination|DLP-D358 Change a Multiplex-Section DCC Termination]].
# Complete the following tasks to delete communication channel terminations, as needed:
#* [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D300 to D399#DLP-D360 Delete a Regenerator-Section DCC Termination|DLP-D360 Delete a Regenerator-Section DCC Termination]]
#* [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D300 to D399#DLP-D362 Delete a Multiplex-Section DCC Termination|DLP-D362 Delete a Multiplex-Section DCC Termination]]
#: '''Stop. You have completed this procedure.'''

== NTP-D85 Change Node Timing ==

{| border = 1
|-
|

'''Purpose'''
|

This procedure changes the SDH timing settings for the ONS 15454 SDH.
|-
|

'''Tools/Equipment'''
|

None
|-
|

'''Prerequisite Procedures'''
|

[[ONS 15454 SDH Procedure Guide R8.5.1 -- Turn Up a Node#NTP-D28 Set Up Timing|NTP-D28 Set Up Timing]]
|-
|

'''Required/As Needed'''
|

As needed
|-
|

'''Onsite/Remote'''
|

Onsite or remote
|-
|

'''Security Level'''
|

Provisioning or higher
|}

# Complete the [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D1 to D99#DLP-D60 Log into CTC|"DLP-D60 Log into CTC"]] task. If you are already logged in, continue with Step 2.
# Complete the [[ONS 15454 SDH Procedure Guide R8.5.1 -- Maintain the Node#NTP-D108 Back Up the Database|NTP-D108 Back Up the Database]].
# As needed, complete the [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D100 to D199#DLP-D157 Change the Node Timing Source|"DLP-D157 Change the Node Timing Source"]] task.
# If you need to change any internal timing settings, complete the [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D1 to D99#DLP-D70 Set Up Internal Timing|"DLP-D70 Set Up Internal Timing"]] task for the settings you need to modify.
#:'''Caution! ''' Internal timing is Stratum 3 and not intended for permanent use. All ONS 15454 SDHs should be timed to a Stratum 2 or better primary reference source.
# If you need to verify timing after removing a node from an multiplex section-shared protection ring (MS-SPRing) or subnet connection protection (SNCP) ring, see the [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D100 to D199#DLP-D195 Verify Timing in a Reduced Ring|"DLP-D195 Verify Timing in a Reduced Ring"]] task.
# Complete the [[ONS 15454 SDH Procedure Guide R8.5.1 -- Maintain the Node#NTP-D108 Back Up the Database|NTP-D108 Back Up the Database]].
#: '''Stop. You have completed this procedure.'''

== NTP-D205 Modify Users and Change Security ==

{| border = 1
|-
|

'''Purpose'''
|

This procedure modifies user and security properties for the ONS 15454 SDH.
|-
|

'''Tools/Equipment'''
|

None
|-
|

'''Prerequisite Procedures'''
|

[[ONS 15454 SDH Procedure Guide R8.5.1 -- Turn Up a Node#NTP-D30 Create Users and Assign Security|NTP-D30 Create Users and Assign Security]]
|-
|

'''Required/As Needed'''
|

As needed
|-
|

'''Onsite/Remote'''
|

Onsite or remote
|-
|

'''Security Level'''
|

Provisioning or higher
|}

# Complete the [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D1 to D99#DLP-D60 Log into CTC|"DLP-D60 Log into CTC"]] task. If you are already logged in, continue with Step 2.
# Complete the [[ONS 15454 SDH Procedure Guide R8.5.1 -- Maintain the Node#NTP-D108 Back Up the Database|NTP-D108 Back Up the Database]].
# Perform any of the following tasks as needed:
#* [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D200 to D299#DLP-D271 Change Node Security Policy on a Single Node|DLP-D271 Change Node Security Policy on a Single Node]]
#* [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D200 to D299#DLP-D272 Change Node Security Policy on Multiple Nodes|DLP-D272 Change Node Security Policy on Multiple Nodes]]
#* [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D400 to D499#DLP-D437 Change Node Access and PM Clearing Privilege|DLP-D437 Change Node Access and PM Clearing Privilege]]
#* [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D100 to D199#DLP-D193 Grant Superuser Privileges to a Provisioning User|DLP-D193 Grant Superuser Privileges to a Provisioning User]]
#* [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D100 to D199#DLP-D158 Change User Password and Security Level on a Single Node|DLP-D158 Change User Password and Security Level on a Single Node]]
#* [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D100 to D199#DLP-D160 Change User Password and Security Level on Multiple Nodes|DLP-D160 Change User Password and Security Level on Multiple Nodes]]
#* [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D100 to D199#DLP-D159 Delete a User on a Single Node|DLP-D159 Delete a User on a Single Node]]
#* [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D100 to D199#DLP-D161 Delete a User on Multiple Nodes|DLP-D161 Delete a User on Multiple Nodes]]
# Complete the [[ONS 15454 SDH Procedure Guide R8.5.1 -- Maintain the Node#NTP-D108 Back Up the Database|NTP-D108 Back Up the Database]].
#: '''Stop. You have completed this procedure.'''

== NTP-D87 Change SNMP Settings ==

{| border = 1
|-
|

'''Purpose'''
|

This procedure modifies SNMP settings for the ONS 15454 SDH.
|-
|

'''Tools/Equipment'''
|

None
|-
|

'''Prerequisite Procedures'''
|

[[ONS 15454 SDH Procedure Guide R8.5.1 -- Turn Up a Node#NTP-D171 Set Up SNMP|NTP-D171 Set Up SNMP]]
|-
|

'''Required/As Needed'''
|

As needed
|-
|

'''Onsite/Remote'''
|

Onsite or remote
|-
|

'''Security Level'''
|

Superuser only
|}

# Complete the [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D1 to D99#DLP-D60 Log into CTC|"DLP-D60 Log into CTC"]] task. If you are already logged in, continue with Step 2.
# Complete the [[ONS 15454 SDH Procedure Guide R8.5.1 -- Maintain the Node#NTP-D108 Back Up the Database|NTP-D108 Back Up the Database]].
# Perform any of the following tasks as needed:
#* [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D200 to D299#DLP-D273 Modify SNMP Trap Destination|DLP-D273 Modify SNMP Trap Destination]]
#* [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D100 to D199#DLP-D163 Delete SNMP Trap Destination|DLP-D163 Delete SNMP Trap Destination]]
# Complete the [[ONS 15454 SDH Procedure Guide R8.5.1 -- Maintain the Node#NTP-D108 Back Up the Database|NTP-D108 Back Up the Database]].
#: '''Stop. You have completed this procedure.'''

ONS 15454 SDH Procedure Guide R8.5.1 -- Change Node Settings - Revision history

Pzimmerm: 1 revision

Megsunda at 10:31, 10 January 2009