Megsunda: /* Table A-5: Node View Card Shortcuts */

2009-01-19T04:38:40Z

Table A-5: Node View Card Shortcuts

New page

This appendix describes the Cisco Transport Controller (CTC) views, menu and tool options, shortcuts, and table display options for the Cisco ONS 15454 SDH. This appendix also describes the shelf inventory data presented in CTC. For more information about CTC, refer to the ''Cisco ONS 15454 SDH Reference Manual''.

'''Note: ''' If network discovery is enabled on the node, CTC searches each node in the network for more recent versions of the CTC software. If a more recent version is discovered, CTC gives you the option of downloading the newer version to your PC. Refer to the "Cisco Transport Controller Operation" chapter in the ''Cisco ONS 15454 SDH Reference Manual'' for more information.
==A.1 Display Node, Card, and Network Views==

CTC provides three views of the ONS 15454 SDH and the ONS network:
* Node view appears when you first log into an ONS 15454 SDH. This view shows a graphic of the ONS 15454 SDH shelf and provides access to tabs and subtabs that you use to manage the node.
* Card view provides access to individual ONS 15454 SDH cards. This view provides a graphic of the card and access to tabs and subtabs that you use to manage the card.
* Network view shows all the nodes in a ring. A Superuser can set up this feature so each user will see the same network view, and users can create a custom view with maps. This view provides access to tabs and subtabs that you use to manage the network. Network view can contain domains. A domain is used to isolate nodes or groups of nodes for easier maintenance. Double-clicking a domain shows all the nodes in the domain; nodes connected to the domain are grayed out.
===A.1.1 Navigating Among Views===

[[ONS 15454 SDH Procedure Guide R8.5.1 -- CTC Information and Shortcuts#Table A-1: Change CTC Views|Table A-1: Change CTC Views]] lists different actions for changing CTC views.

===== Table A-1: Change CTC Views =====

{| border = 1
|-
!To Display:
!Perform One of the Following:
|-
|

Node view
|
* Log into a node; node view is the default view.
* In network view, double-click a node icon, or right-click the node and choose '''Open Node '''from the shortcut menu.* In network view, click a node icon, then choose '''Go to Selected Object View '''from the View menu.
* From the CTC View menu, choose <span style="font-weight: bold">Go To Other Node, then choose a node from the shortcut menu.
* Use the arrows on the CTC toolbar to navigate up or down among views. For example, in network view, click a node and then click the down arrow.
|-
|

Network view
|
* In node view, click the up arrow or the Network View tool on the CTC toolbar.
* From the View menu, choose '''Go To Network View'''.
|-
|

Card view
|
* In node view, double-click a card or right-click the card and choose '''Open Card'''.
* In node view, single-click a card icon, then choose '''Go to Selected Object View '''from the View menu.
* Use the arrows on the CTC toolbar to navigate up or down views. For example, in node view, click a card, then click the down arrow.
|}

A.1.2 Node Icons on the Network View Map

[[ONS 15454 SDH Procedure Guide R8.5.1 -- CTC Information and Shortcuts#Table A-2: Description of Node Icons on Network View Map|Table A-2]] lists the node icons on the network view map.

===== Table A-2: Description of Node Icons on Network View Map =====

{| border = 1
|-
!Node Name
!Icon
!Description
|-
|

SDH

Hybrid OADM

Hybrid line amplifier

Hybrid terminal

Passive hybrid terminal

Amplified TDM
|

[[Image:96934.jpg]]
|

An SDH, hybrid, or amplified time-division multiplexing (TDM) node icon are represented as a cylinder with crossed arrows.
* An SDH node can include STM-N cards, electrical cards, Storage Access Management (SAM) cards, cross-connects, and Ethernet cards.
* A hybrid optical add/drop multiplexing (OADM) node contains at least one AD-xC-xx.x card or one AD-xB-xx.x card and two TCC2/TCC2P cards. TDM cards can be installed in any available slot.
* A hybrid line amplifier node contains amplifiers and both TDM and dense wavelength division multiplexing (DWDM) cards.
* A hybrid terminal node contains at least one 32MUX-O card, one 32DMX-O card, amplifiers, two TCC2/TCC2P cards, and TDM cards. Alternatively, the node may contain at least one 40-MUX-C, one 40-DMX-C card, amplifiers, two TCC2/TCC2P cards, and TDM cards.
* A passive hybrid terminal node has the same equipment as the hybrid terminal node, but does not contain amplifiers.
* An amplified TDM node is a node that increases the span length between two ONS 15454 SDH nodes that contain TDM cards and optical amplifiers. Amplified TDM nodes contain either OPT-BST amplifiers or AD-1C-xx.x cards.

For DWDM node information, refer to the ''Cisco ONS 15454 DWDM Reference Manual''.
|-
|

Hub
|

[[Image:96441.jpg]]
|

A DWDM hub node icon is represented as a three-dimensional cylinder with amplifiers. A hub node contains at least two 32-channel demultiplexers and two 32-channel multiplexers. The hub node may alternatively contain at least two 40-DMX-C cards and two 40-MUX-C cards. No OADM cards are provisioned. For DWDM node information, refer to the ''Cisco ONS 15454 DWDM Reference Manual''.
|-
|

OADM
|

[[Image:96440.jpg]]
|

A DWDM OADM node icon is represented as a three-dimensional cylinder with arrows. An OADM node contains at least one channel OADM (AD-xC) or one band OADM (AD-xB). No 32MUX-O, 32DMX-O, 32DMX, 40-MUX-C, or 40-DMX-C cards are provisioned. For DWDM node information, refer to the ''Cisco ONS 15454 DWDM Reference Manual''.
|-
|

ROADM
|

[[Image:120072.jpg]]
|

A reconfigurable OADM (ROADM) node icon is represented as a three-dimensional cylinder with two amplifier symbols that have arrows between them. An ROADM node contains at least one 32WSS or 40-WSS-C card. A single-slot 32DMX or double-slot 32DMX-O can be installed, but is not required. Alternatively, a 40-DMX-C can be installed, but is not required. Transponders (TXPs) and muxponders (MXPs) can be installed in Slots 6 and 12. If amplification is not used, TXPs or MXPs can be installed in Slots 1 and 17. If OPT-BSTs are not installed, OSC-CSM cards are installed in Slots 2 and 16 and Slots 8 and 10 are empty.
|-
|

Terminal
|

[[Image:159807.jpg]]
|

A terminal node is represented as a three-dimensional cylinder with a white rectangle in the center.
* A terminal node contains one 32DMX or 32DMX-O card and one 32-MUX-O card. Alternatively, a terminal node contains one 40-DMX-C card and one 40-MUX-C card. No OADM cards are provisioned.
* A flexible terminal node contains a series of OADM and amplifier cards.

For DWDM node information, refer to the ''Cisco ONS 15454 DWDM Reference Manual''.
|-
|

Line Amplifier

OSC regeneration
|

[[Image:96444.jpg]]
|

Line amplifier and optical service channel (OSC) regeneration nodes are represented as a three-dimensional cylinder with one arrow pointing west and another arrow pointing east.
* A line amplifier node only has OPT-PRE or OPT-BST amplifiers provisioned.
* An OSC regeneration node contains two OSC-CSM cards.

For DWDM node information, refer to the ''Cisco ONS 15454 DWDM Reference Manual''.
|-
|

Unknown
|

[[Image:96445.jpg]]
|

An unknown DWDM node icon is represented as a three-dimensional cylinder with one arrow pointing north. An unknown node means that the provisioned cards do not allow the node to fit into any of the defined DWDM node categories. For DWDM node information, refer to the ''Cisco ONS 15454 DWDM Reference Manual''.
|}

==A.2 Manage the CTC Window==

Different navigational methods are available within the CTC window to access views and perform management actions. You can double-click and right-click objects in the graphic area and move the mouse over nodes, cards, and ports to view popup status information.
A.2.1 CTC Menu and Toolbar Options

The CTC window menu bar and toolbar provide primary CTC functions. [[ONS 15454 SDH Procedure Guide R8.5.1 -- CTC Information and Shortcuts#Table A-3: CTC Menu and Toolbar Options|Table A-3]] shows the actions that are available from the CTC menu and toolbar.

===== Table A-3: CTC Menu and Toolbar Options =====

{| border = 1
|-
!Menu
!Menu Option
!Toolbar
!Description
|-
|rowspan="4"|

File
|

Add Node
|

[[Image:71511.jpg]]
|

Adds a node to the current session. See the [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D1 to D99#DLP-D62 Add a Node to the Current Session or Login Group|"DLP-D62 Add a Node to the Current Session or Login Group"]] task.
|-
|

Delete Selected Node
|

[[Image:83392.jpg]]
|

Deletes a node from the current session.
|-
|

Lock CTC
|

[[Image:71512.jpg]]
|

Locks CTC without closing the CTC session. A user name and password are required to open CTC.
|-
|

Print
|

[[Image:71513.jpg]]
|

Prints CTC data. See the [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D100 to D199#DLP-D146 Print CTC Data|"DLP-D146 Print CTC Data"]] task.
|-
|rowspan="2"|
|

Export
|

[[Image:71514.jpg]]
|

Exports CTC data. See the [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D100 to D199#DLP-D147 Export CTC Data|"DLP-D147 Export CTC Data"]] task.
|-
|

Exit
|
-

|

Closes the CTC session.
|-
|

Edit
|

Preferences
|

[[Image:71515.jpg]]
|

Displays the Preferences dialog box, which shows the following tabs:
* General-Allows you to change event defaults and manage preferences.
* Login Node Groups-Allows you to create login node groups. See the [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D1 to D99#DLP-D61 Create Login Node Groups|"DLP-D61 Create Login Node Groups"]] task.
* Map-Allows you to customize the network view. See the [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D100 to D199#DLP-D145 Change the Network View Background Color|"DLP-D145 Change the Network View Background Color"]] task and the [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D200 to D299#DLP-D268 Apply a Custom Network View Background Map|"DLP-D268 Apply a Custom Network View Background Map"]] task.
* Circuit-Allows you to change the color of circuit spans. See the [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D200 to D299#DLP-D232 Change Active and Standby Span Color|"DLP-D232 Change Active and Standby Span Color"]] task.
* Firewall-Sets the Internet Inter-ORB Protocol (IIOP) listener ports for access to the ONS 15454 SDH through a firewall. See the [[ONS 15454 SDH Procedure Guide R8.5.1 -- Turn Up a Node#NTP-D27 Set Up the ONS 15454 SDH for Firewall Access|NTP-D27 Set Up the ONS 15454 SDH for Firewall Access]].
* JRE-Allows you to select another Java Runtime Environment (JRE) version. See the [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D400 to D499#DLP-D422 Change the JRE Version|"DLP-D422 Change the JRE Version"]] task.
|-
|rowspan="9"|

View
|

Go To Previous View
|

[[Image:71516.jpg]]
|

Displays the previous CTC view.
|-
|

Go To Next View
|

[[Image:71517.jpg]]
|

Displays the next CTC view. Available only after you navigate to a previous view. Go to Previous View and Go to Next View are similar to forward and backward navigation in a web browser.
|-
|

Go To Parent View
|

[[Image:71518.jpg]]
|

References the CTC view hierarchy: network view, node view, and card view. In card view, this command opens the node view; in node view, the command opens network view. Not available in network view.
|-
|

Go To Selected Object View
|

[[Image:71519.jpg]]
|

Displays the object selected in the CTC window.
|-
|

Go To Home View
|

[[Image:71520.jpg]]
|

Displays the login node in node view.
|-
|

Go To Network View
|

[[Image:71521.jpg]]
|

Displays the network view.
|-
|

Go To Other Node
|

[[Image:83394.jpg]]
|

Displays a dialog box allowing you to enter the node name or IP address of a network node that you want to view.
|-
|

Show Status Bar
|

-
|

Click this item to show or hide the status bar at the bottom of the CTC window.
|-
|

Show Tool Bar
|

-
|

Click this item to show or hide the CTC toolbar.
|-
|

-
|

-
|

[[Image:71523.jpg]]
|

(Toolbar only) Zooms out the network view area.
|-
|

-
|

-
|

[[Image:71524.jpg]]
|

(Toolbar only) Zooms in the network view area.
|-
|

-
|

-
|

[[Image:71525.jpg]]
|

(Toolbar only) Zooms in a selected network view area.
|-
|rowspan="6"|

Tools
|

Circuits
|

-
|

Displays the following options:
* Repair Circuits-(ONS 15454 only) Repairs incomplete circuits following replacement of the ONS 15454 SDH alarm interface panel (AIP). Refer to the ''Cisco ONS 15454 SDH Troubleshooting Guide'' for more information.
* Reconfigure Circuits-Allows you to reconfigure circuits. See the [[ONS 15454 SDH Procedure Guide R8.5.1 -- Manage Circuits#NTP-D309 Reconfigure Circuits|NTP-D309 Reconfigure Circuits]] for more information.
* Merge Circuits-Merges multiple circuits. See the [[ONS 15454 SDH Procedure Guide R8.5.1 -- Manage Circuits#NTP-D310 Merge Circuits|NTP-D310 Merge Circuits]].
* Set Path Selector Attributes-Allows you to edit subnetwork connection protection (SNCP) circuit path selector attributes. See the [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D200 to D299#DLP-D233 Edit SNCP Circuit Path Selectors|"DLP-D233 Edit SNCP Circuit Path Selectors"]] task.
* Set Circuit State-Allows you to change a circuit state. See the [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D200 to D299#DLP-D230 Change a Circuit State|"DLP-D230 Change a Circuit State"]] task.
* Roll Circuit-Allows you to reroute live traffic without interrupting service. See the [[ONS 15454 SDH Procedure Guide R8.5.1 -- Manage Circuits#NTP-D332 Bridge and Roll Traffic|NTP-D332 Bridge and Roll Traffic]].
* Delete Rolls-Removes rolls that are not deleted by CTC after a roll has been completed. See the [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D200 to D299#DLP-D239 Delete a Roll|"DLP-D239 Delete a Roll"]] task.
* Upgrade OCHNC-(ONS 15454 only) Upgrades OCHNCs created in earlier software releases to OCHCCs. Refer to the ''Cisco ONS 15454 DWDM Procedure Guide ''for more information.
* Show RPR Circuit Ring-Shows the RPR ring for the circuit selected on the Circuits window. See the [[ONS 15454 SDH Procedure Guide R8.5.1 -- Manage Circuits#NTP-D356 Display IEEE 802.17 RPR Circuits|NTP-D356 Display IEEE 802.17 RPR Circuits]].
|-
|

Overhead Circuits
|

-
|

Displays the Repair IP Tunnels option, which fixes circuits that are in the PARTIAL status as a result of node IP address changes. See the [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D1 to D99#DLP-D30 Repair an IP Tunnel|"DLP-D30 Repair an IP Tunnel"]] task.
|-
|

Topology Upgrade
|

-
|

Displays the following options:
* Convert SNCP to MS-SPRing-Converts SNCP to MS-SPRing. See the [[ONS 15454 SDH Procedure Guide R8.5.1 -- Convert Network Configurations#NTP-D210 Convert an SNCP to a Two-Fiber MS-SPRing Manually|NTP-D210 Convert an SNCP to a Two-Fiber MS-SPRing Manually]].
* Convert Unprotected to SNCP-Converts a point-to-point or linear add/drop multiplexer (ADM) to SNCP. See [[ONS 15454 SDH Procedure Guide R8.5.1 -- Convert Network Configurations#NTP-D156 Convert a Point-to-Point or Linear ADM to an SNCP Manually|NTP-D156 Convert a Point-to-Point or Linear ADM to an SNCP Manually]]
|-
|

Manage VLANs
|

-
|

Displays a list of VLANs that have been created and allows you to delete VLANs. See the [[ONS 15454 SDH Procedure Guide R8.5.1 -- Manage Circuits#NTP-D352 Manage VLANs|NTP-D352 Manage VLANs]].
|-
|

Open TL1 Connection
|

[[Image:71522.jpg]]
|

Displays the TL1 window, which allows you to enter TL1 commands.
|-
|

Open IOS Connection
|

[[Image:83417.jpg]]
|

Displays the Cisco IOS command line interface dialog box if a Cisco IOS capable card (ML1000-2, for example) is installed in the node. Refer to the <span style="font-style: italic">Cisco ONS 15454 and Cisco ONS 15454 SDH Ethernet Card Software Feature and Configuration Guide.
|-
|

Tools
|

Update CTC
|
-

|

Allows you to update CTC to a newer version, if a newer version was found during network discovery.
|-
|rowspan="3"|

Help
|

Contents and Index
|

-
|

Displays the online help window.
|-
|

User Manuals
|

-
|

Displays the Cisco ONS 15454 SDH documentation.
|-
|

About CTC
|

-
|

Displays the software version and the nodes in the CTC session.
|-
|

-
|

Network Scope
|

-
|

Displays the selected network scope. The network view drop-down list has three options: DWDM, TDM, or All. If you choose DWDM, only DWDM nodes appear on the network view map. If you choose TDM, only TDM nodes appear on the network view map. If you choose All, every node on the network appears on the network view map.
|-
|

-
|

Link Filter
|

[[Image:145239.jpg]]
|

Opens the Link Filter dialog box, which allows you to choose which link classes display on the nondetail network map. The available classes vary according to the selected network scope:
* ALL-DCC, GCC, OTS, PPC, server trail
* DWDM-GCC, OTS, PPC
* TDM-DCC, PPC, server trail
|-
|

-
|

-
|

[[Image:144674.jpg]]
|

Opens the Collapse/Expand Links dialog box, which allows you to globally expand or consolidate network view links based on link type.
|-
|

-
|

-
|

[[Image:96906.jpg]]
[[Image:96954.jpg]]
|

Opens the CTC Alerts dialog box, which shows the status of certain CTC background tasks. When the CTC Alerts toolbar icon contains a red triangle, unread notifications exist. When there are no unread notifications, the CTC Alerts toolbar icon contains a gray triangle. Notifications include:
* Network disconnection
* Send-PDIP inconsistency-CTC discovers a new node that does not have a SEND-PDIP setting consistent with the login node.
* Circuit deletion status-The alert appears when the circuit deletion process completes if you choose "Notify when complete" as described in the [[ONS 15454 SDH Procedure Guide R8.5.1 -- Manage Circuits#NTP-D288 Modify and Delete Overhead Circuits and Server Trails|NTP-D288 Modify and Delete Overhead Circuits and Server Trails]]. The CTC Alerts window always reports circuit deletion errors.
* Conditions retrieval error
* Software download failure

You can save a notification by clicking the Save button in the CTC Alerts dialog box and navigating to the directory where you want to save the text file.

By default, the CTC Alerts dialog box appears automatically. To disable automatic popup, see the [[ONS 15454 SDH Procedure Guide R8.5.1 -- DLPs D1 to D99#DLP-D25 Configure the CTC Alerts Dialog Box for Automatic Popup|"DLP-D25 Configure the CTC Alerts Dialog Box for Automatic Popup"]] task.
|}

===A.2.2 CTC Mouse Options===

In addition to the CTC menu bar and toolbar, you can invoke actions by double-clicking CTC window items with your mouse, or by right-clicking an item and choosing actions from shortcut menus. [[ONS 15454 SDH Procedure Guide R8.5.1 -- CTC Information and Shortcuts#Table A-4: CTC Window Mouse Shortcuts|Table A-4]] lists the CTC window mouse shortcuts.

===== Table A-4: CTC Window Mouse Shortcuts =====

{| border = 1
|-
!Technique
!Description
|-
|

Double-click
|
* Node in network view-Displays the node view.
* Card in node view-Displays the card view.* Domain in network view-Displays the nodes in a domain.
* Alarm/Event-Displays the object that raised the alarm or event.
* Circuits-Displays the Edit Circuit window.
|-
|

Right-click
|
* Network view graphic area-Displays a menu that you can use to create a new domain; change the position and zoom level of the graphic image; save the map layout (if you have a Superuser security level); reset the default layout of the network view; set, change, or remove the background image and color; collapse and expand links; and save or reset the node position.
* Domain in network view-Displays a menu that you can use to open a domain, show the domain overview, rename the domain, and delete the domain.* Node in network view-Displays a menu that you can use to open the node, reset the node icon position to the longitude and latitude set on the Provisioning > General tab, delete the node, fix the node position for auto layout, provision circuits, and update circuits with a new node.
* Span in network view-Displays a menu that you can use to view information about the span's source and destination ports, the protection scheme, and the optical or electrical level. You can open the Circuits on Spans dialog box, which shows additional span information and allows you to perform SNCP protection switching. If an MS-SPRing is provisioned, you can display the PCA circuits. You can also perform span upgrades from this menu, and expand and collapse links.
* Card in node view-Displays a menu that you can use to open, delete, reset, and change cards. The card that is selected determines the commands that appear.
* Card in card view-Displays a menu that you can use to reset the card or go to the parent view (node view).
* Empty slot in node view-Displays a menu with cards that you can choose to preprovision the slot.
|-
|

Move mouse cursor
|
* Over node in network view-Displays a summary of node alarms and provides a warning if the node icon has been moved out of the map range.
* Over span in network view-Displays circuit bandwidth (node, slot, port) and protection information. For DWDM spans, the optical direction and optical ring ID appear. If the span terminates on the trunk port of a transponder card (TXP/MXP), the associated DWDM wavelength also appears.
* Over domain in network view-Displays domain name and the number of nodes in the domain.
* Over card in node view-Displays card type, card status, and alarm profile status. For DWDM cards, the number of bands or channels also appear, depending on the card type.
* Over card port in node view-Displays port number and/or name, port service state, and alarm profile status.
* Over card port in card view-Displays port name (if applicable), port service state, protection status (if applicable), and alarm profile status. For DWDM cards, the port number is labeled as channel, band, or line depending on the card type along with the port state and alarm profile status.
|}

===A.2.3 Node View Shortcuts===

[[ONS 15454 SDH Procedure Guide R8.5.1 -- CTC Information and Shortcuts#Table A-5: Node View Card Shortcuts|Table A-5]] shows actions on ONS 15454 SDH cards that you can perform by moving your mouse over the CTC window.

===== Table A-5: Node View Card Shortcuts =====

{| border = 1
|-
!Action
!Shortcut
|-
|

Display card information
|

In node view, move your mouse over cards in the graphic to display tooltips with the card type, card status (active or standby), the highest level of alarm (if any), and the alarm profile used by the card.
|-
|

Open, reset, or delete a card
|

In node view, right-click a card. Choose '''Open Card '''to display the card in card view, '''Delete Card '''to delete it, or '''Reset Card '''to reset the card.
|-
|

Preprovision a slot
|

In node view, right-click an empty slot. Choose the card type that you want to provision in the slot from the shortcut menu.
|-
|

Change a card
|

In node view, right-click an STM-N card and choose '''Change Card'''. In the Change Card dialog box, choose the card type. Change card retains all card provisioning, including data communications channel (DCC) terminations, protection, circuits, and ring topology.
|-
|

Change view
|

Right-click on the area outside the node to display a menu that allows you to return to the parent view.
|}

===A.2.4 Network View Tasks===

Right-click the network view graphic area or a node, span, or domain to display shortcut menus. [[ONS 15454 SDH Procedure Guide R8.5.1 -- CTC Information and Shortcuts#Table A-6: Network Management Tasks in Network View|Table A-6]] lists the actions that are available from the network view.

===== Table A-6: Network Management Tasks in Network View =====

{| border = 1
|-
!Action
!Task
|-
|

Open a node
|

Any of the following:
* Double-click a node icon.
* Right-click a node icon and choose '''Open Node''' from the shortcut menu.
* Click a node and choose '''Go to Selected Object View''' from the View menu.
* From the View menu, choose '''Go To Other Node'''. Choose a node from the Select Node dialog box.
* Double-click a node alarm or event in the Alarms or History tab.
|-
|

Move a node icon
|

Press the '''Ctrl''' key and the left mouse button simultaneously and drag the node icon to a new location.
|-
|

Consolidate links
|

Right-click on a link and choose '''Consolidate/Expand''' from the shortcut menu. For more detailed instructions, refer to [[ONS 15454 SDH Procedure Guide R8.5.1 -- Change Node Settings#Change Node Settings|Change Node Settings]].
|-
|

Reset node icon position
|

Right-click a node and choose '''Reset Node Position''' from the shortcut menu. The node icon moves to the position defined by the longitude and latitude fields on the Provisioning > General tab in node view.
|-
|

Provision a circuit
|

Right-click a node. From the shortcut menu, choose '''Provision Circuit To''' and choose the node where you want to provision the circuit. For circuit creation procedures, see [[ONS 15454 SDH Procedure Guide R8.5.1 -- Create Circuits and Low-Order Tunnels#Create Circuits and Low-Order Tunnels|Create Circuits and Low-Order Tunnels]].
|-
|

Update circuits with new node
|

Right-click a node and choose '''Update Circuits With New Node''' from the shortcut menu. Use this command when you add a new node and want to pass circuits through it.
|-
|

Display a link end point
|

Right-click a span. From the shortcut menu, choose '''Go To '''[node> | port> | slot>] for the drop port you want to view. CTC displays the card in card view.
|-
|

Display span properties
|

Do any of the following:
* Move mouse over a span; the properties appear near the span.
* Click a span; the properties appear in the upper left corner of the window.
* Right-click a span; the properties appear at the top of the shortcut menu.
|-
|

Perform an SNCP protection switch for an entire span
|

Right-click a network span and click '''Circuits'''. In the Circuits on Span dialog box, switch options appear in the SNCP Span Switching field.
|-
|

Display DWDM span properties
|

Right-click a DWDM network span and click '''Circuits'''. The optical channel network connection (OCHNC), optical direction, and circuit appear.
|-
|

Upgrade a span
|

Right-click a span and choose '''Upgrade Span''' from the shortcut menu.

'''Note: ''' For detailed span upgrade information and instructions, see [[ONS 15454 SDH Procedure Guide R8.5.1 -- Upgrade Cards and Spans#Upgrade Cards and Spans|Upgrade Cards and Spans]].
|-
|

Upgrade terminal to linear
|

Right-click a span and choose '''Upgrade Protection''' > '''Terminal to Linear '''from the shortcut menu. See the [[ONS 15454 SDH Procedure Guide R8.5.1 -- Convert Network Configurations#NTP-D338 Convert a Point-to-Point to a Linear ADM Automatically|"NTP-D338 Convert a Point-to-Point to a Linear ADM Automatically"]] task.
|}

===A.2.5 Table Display Options===

Right-clicking a table column displays a menu. [[ONS 15454 SDH Procedure Guide R8.5.1 -- CTC Information and Shortcuts#Table A-7: Table Display Options|Table A-7]] shows table display options, which include rearranging or hiding CTC table columns and sorting table columns by primary or secondary keys.

===== Table A-7: Table Display Options =====

{| border = 1
|-
!Task
!Click
!Right-Click Shortcut Menu
|-
|

Resize column
|

Click while dragging the column header separator to the right or left.
|

-
|-
|

Rearrange column order
|

Click while dragging the column header to the right or left.
|

-
|-
|

Reset column order
|

-
|

Choose '''Reset Columns Order/Visibility'''.
|-
|

Hide column
|

-
|

Choose '''Hide Column'''.
|-
|

Show column
|

-
|

Choose '''Show Column > ''' ''column_name''.
|-
|

Display all hidden columns
|

-
|

Choose '''Reset Columns Order/Visibility'''.
|-
|

Sort table (primary)
|

Click a column header; each click changes sort order (ascending or descending).
|

Choose '''Sort Column'''.
|-
|

Sort table (secondary sorting keys)
|

Press the '''Shift''' key and simultaneously click the column header.
|

Choose '''Sort Column (incremental)'''.
|-
|

Reset sorting
|

-
|

Choose '''Reset Sorting'''.
|-
|

View table row count
|

-
|

View the number after '''Row count=;''' it is the last item on the shortcut menu.
|}

==A.3 Equipment Inventory==

In node view, the Inventory tab displays information about the ONS 15454 SDH equipment, including:
* Delete button-After highlighting a card with your mouse, use this button to delete the card from node view.
* Reset button-After highlighting a card with your mouse, use this button to reset a card.
* Location-Identifies where the equipment is installed, either chassis or slot number.
* Eqpt Type-Displays the type of equipment but not the specific card name, for example, STM-4 or E-1.
* Actual Eqpt Type-Displays the specific card name, for example, OC12 IR/STM4 SH 1310.
* Admin State-Changes the card service state unless network conditions prevent the change. For more information about card states, refer to the "Enhanced State Model" appendix of the ''Cisco ONS 15454 SDH Reference Manual.''
** Unlocked-Puts the card in the Unlocked-enabled service state.
** Locked,maintenance-Puts the card in the Locked-enabled,maintenance service state.
* Service State-Displays the current card service state, which is an autonomously generated state that gives the overall condition of the card. Service states appear in the format: Primary State-Primary State Qualifier, Secondary State. For more information about card states, refer to the "Administrative and Service States" appendix of the ''Cisco ONS 15454 SDH Reference Manual. ''
* HW Part #-Displays the hardware part number; this number is printed on the top of the card or equipment piece.
* HW Rev-Displays the hardware revision number.
* Serial #-Displays the equipment serial number; this number is unique to each card.
* CLEI Code-Displays the Common Language Equipment Identifier code.
* Bootroom Rev-Displays the boot read-only memory (ROM) revision number.
* Product ID-Displays the manufacturing product identifier for a hardware component, such as a fan tray, chassis, or card. The Product ID column displays "N/A" for equipment existing before Software Release 4.6.
* Version ID-Displays the manufacturing version identifier for a fan tray, chassis, or card. The Version ID column displays "N/A" for equipment existing before Software R4.6.

ONS 15454 SDH Procedure Guide R8.5.1 -- CTC Information and Shortcuts - Revision history

Pzimmerm: 1 revision

Megsunda: /* Table A-5: Node View Card Shortcuts */