Network Management Configuration Example for Ciscoworks LMS Syslog Configuration via GUI
From DocWiki
(→Related Information) |
(→Introduction) |
||
| Line 3: | Line 3: | ||
==Introduction== | ==Introduction== | ||
| - | + | It has been noticed that the most basic issues seen with the Ciscoworks LMS on its Syslog configuration is because its basic Architecture is not known. This document is intended to give a brief introduction on LMS Syslog Configuration and Architecture for effective Syslog Management using Ciscoworks RME. | |
==Design== | ==Design== | ||
Revision as of 18:20, 23 June 2010
Contents |
Introduction
It has been noticed that the most basic issues seen with the Ciscoworks LMS on its Syslog configuration is because its basic Architecture is not known. This document is intended to give a brief introduction on LMS Syslog Configuration and Architecture for effective Syslog Management using Ciscoworks RME.
Design
File:File:///C:/Documents and Settings/vinarya/Desktop/syslog cycle.JPG
Configuration
Related Information
This section provides information you can use to confirm your configuration is working properly.
More detailed information on the Syslog Configuration can be gathered from the ciscoworks User Guide from [1] and the on Syslog Troubleshooting from [2] .
You can check if the Syslog Collector is subscribed and is showing the Syslog Messages as forwarded and try generating a 24 hour report from Ciscoworks on Syslog.
