LAN Switching Voice and Data Vlan Configuration Example

From DocWiki

Revision as of 17:17, 23 June 2010 by Jkratky (Talk | contribs)
Jump to: navigation, search
Switch# configure terminal
Switch(config)# interface gigabitethernet1/0/1 <--- example interface
Switch(config-if)# switchport trunk encapsulation dot1q
Switch(config-if)# switchport mode trunk
Switch(config-if)# switchport voice vlan 3     <---- exampale voice vlan 3
Switch(config-if)# switchport trunk native vlan 2 <- example data vlan 2

ex. vlan 2 - data vlan 

   vlan 3 - voice vlan

Rating: 4.0/5 (5 votes cast)

Retrieved from "http://docwiki.cisco.com/wiki/LAN_Switching_Voice_and_Data_Vlan_Configuration_Example"
Personal tools