LAN Switching Voice and Data Vlan Configuration Example
From DocWiki
(Difference between revisions)
| (2 intermediate revisions not shown) | |||
| Line 3: | Line 3: | ||
Switch(config-if)# switchport trunk encapsulation dot1q | Switch(config-if)# switchport trunk encapsulation dot1q | ||
Switch(config-if)# switchport mode trunk | Switch(config-if)# switchport mode trunk | ||
| - | Switch(config-if)# switchport voice vlan 3 <---- | + | Switch(config-if)# switchport voice vlan 3 <---- example voice vlan 3 |
Switch(config-if)# switchport trunk native vlan 2 <- example data vlan 2 | Switch(config-if)# switchport trunk native vlan 2 <- example data vlan 2 | ||
</pre> | </pre> | ||
| Line 9: | Line 9: | ||
vlan 3 - voice vlan | vlan 3 - voice vlan | ||
| - | [[Category:Configuration Examples]] | + | [[Category:LAN Switching Configuration Examples]] |
Latest revision as of 19:33, 18 November 2011
Switch# configure terminal Switch(config)# interface gigabitethernet1/0/1 <--- example interface Switch(config-if)# switchport trunk encapsulation dot1q Switch(config-if)# switchport mode trunk Switch(config-if)# switchport voice vlan 3 <---- example voice vlan 3 Switch(config-if)# switchport trunk native vlan 2 <- example data vlan 2
ex. vlan 2 - data vlan
vlan 3 - voice vlan
