LAN Switching Voice and Data Vlan Configuration Example

From DocWiki

(Difference between revisions)
Jump to: navigation, search
Line 1: Line 1:
-
Switch# configure terminal
+
<pre>Switch# configure terminal
Switch(config)# interface gigabitethernet1/0/1 <--- example interface
Switch(config)# interface gigabitethernet1/0/1 <--- example interface
Switch(config-if)# switchport trunk encapsulation dot1q
Switch(config-if)# switchport trunk encapsulation dot1q
Line 5: Line 5:
Switch(config-if)# switchport voice vlan 3    <---- exampale voice vlan 3
Switch(config-if)# switchport voice vlan 3    <---- exampale voice vlan 3
Switch(config-if)# switchport trunk native vlan 2 <- example data vlan 2
Switch(config-if)# switchport trunk native vlan 2 <- example data vlan 2
-
 
+
</pre>
ex. vlan 2 - data vlan
ex. vlan 2 - data vlan
     vlan 3 - voice vlan
     vlan 3 - voice vlan
[[Category:Configuration Examples]]
[[Category:Configuration Examples]]

Revision as of 17:17, 23 June 2010

Switch# configure terminal
Switch(config)# interface gigabitethernet1/0/1 <--- example interface
Switch(config-if)# switchport trunk encapsulation dot1q
Switch(config-if)# switchport mode trunk
Switch(config-if)# switchport voice vlan 3     <---- exampale voice vlan 3
Switch(config-if)# switchport trunk native vlan 2 <- example data vlan 2

ex. vlan 2 - data vlan

   vlan 3 - voice vlan

Rating: 4.0/5 (6 votes cast)

Personal tools