Initial Start up issues

From DocWiki

(Difference between revisions)
Jump to: navigation, search
Line 19: Line 19:
'''CIM looses connectivity to ICM'''  
'''CIM looses connectivity to ICM'''  
-
: How do I verify if EAAS instance is connected to the MR-PIM or verify that the MR link is active/enabled ?
+
: '''How do I verify if EAAS instance is connected to the MR-PIM or verify that the MR link is active/enabled ?'''
:* Check if the MR-PIM is active by checking the MR-PIM command prompt window [status should be ACTIVE]. In a duplexed configuration, one of the sides should be ACTIVE and the other one should be IDLE. For example, If MR PG side B is active, then MR PG A MR-PIM should remain idle
:* Check if the MR-PIM is active by checking the MR-PIM command prompt window [status should be ACTIVE]. In a duplexed configuration, one of the sides should be ACTIVE and the other one should be IDLE. For example, If MR PG side B is active, then MR PG A MR-PIM should remain idle
:* Verify OPEN_REQ and OPEN_CONF messages in MR-PIM logs and check if ROUTING_ENABLED_EVENT is sent from MR-PIM to EAAS. CIM will start sending all route requests only after this message is sent by the MR-PIM to EAAS
:* Verify OPEN_REQ and OPEN_CONF messages in MR-PIM logs and check if ROUTING_ENABLED_EVENT is sent from MR-PIM to EAAS. CIM will start sending all route requests only after this message is sent by the MR-PIM to EAAS
 +
 +
: '''How do I verify if Listener instance is connected to CTI server ?'''
 +
:* Check for OPEN_REQ and OPEN_CONF messages in CTI server. Following fields in the OPEN_REQ message indicates that the OPEN_REQ message is sent by CIM listener instance :
 +
Clientsignature: “Administrator”
 +
ApplicationPathID: <XXXX> - The application path ID of the CIM application instance.
 +
:* In CTI server log, Check for the ProcessARMAppPathUpRespMsg message which indicates that the application path members are enabled and active.
 +
Trace: ProcessARMAppPathUpRespMsg -- InvokeID = 738279591, Status = 0, ApplicationPathID = 5000
 +
AppPathMemberList = appPathMember count = 4 -> Depends on the number of MRDs configured in the system.
 +
MRDID/PeripheralID = (
 +
5000/5000,
 +
5001/5000,
 +
5002/5000,
 +
5003/5000)
 +
 +
: '''How do I verify if Listener is connected to Cisco Media Blender ?'''
 +
:* From the CMB logs, check for the message : “Transport link is Up” – This message indicates that the RMI connection between CMB and Listener instance is active.
 +
:* There should be NO alerts in the CMB administration UI.

Revision as of 10:34, 5 January 2011

Initial Start up Issues

EAAS instance not starting

  • Verify from the System Console if EAAS process is running. If not, start this service.
  • Analyze JAVA exceptions that may have been logged in eg_log_<Server_name>_EAAS-process.log.

Listener instances not starting

  • Analyze JAVA exceptions that may be logged in eg_log_<server_name>_Listener-process.log.
  • Analyze JAVA exceptions that may be logged in eg_log_<server_name>_Application Server.log

When trying to create a new listener instance, the error “You have exceeded the maximum number of instances allowed for this partition” is returned.

  • Increase the maximum limit for number of instances in the Listener Process administration section of System Console.
  • Click on partition node, and increase the maximum allowable instances in the services section.

CIM looses connectivity to ICM

How do I verify if EAAS instance is connected to the MR-PIM or verify that the MR link is active/enabled ?
  • Check if the MR-PIM is active by checking the MR-PIM command prompt window [status should be ACTIVE]. In a duplexed configuration, one of the sides should be ACTIVE and the other one should be IDLE. For example, If MR PG side B is active, then MR PG A MR-PIM should remain idle
  • Verify OPEN_REQ and OPEN_CONF messages in MR-PIM logs and check if ROUTING_ENABLED_EVENT is sent from MR-PIM to EAAS. CIM will start sending all route requests only after this message is sent by the MR-PIM to EAAS
How do I verify if Listener instance is connected to CTI server ?
  • Check for OPEN_REQ and OPEN_CONF messages in CTI server. Following fields in the OPEN_REQ message indicates that the OPEN_REQ message is sent by CIM listener instance :

Clientsignature: “Administrator” ApplicationPathID: <XXXX> - The application path ID of the CIM application instance.

  • In CTI server log, Check for the ProcessARMAppPathUpRespMsg message which indicates that the application path members are enabled and active.

Trace: ProcessARMAppPathUpRespMsg -- InvokeID = 738279591, Status = 0, ApplicationPathID = 5000 AppPathMemberList = appPathMember count = 4 -> Depends on the number of MRDs configured in the system. MRDID/PeripheralID = ( 5000/5000, 5001/5000, 5002/5000, 5003/5000)

How do I verify if Listener is connected to Cisco Media Blender ?
  • From the CMB logs, check for the message : “Transport link is Up” – This message indicates that the RMI connection between CMB and Listener instance is active.
  • There should be NO alerts in the CMB administration UI.

Rating: 0.0/5 (0 votes cast)

Personal tools