Initial Start up issues
From DocWiki
(Difference between revisions)
(New page: == '''Initial Start up Issues''' == '''EAAS instance not starting''' :* Verify from the System Console if EAAS process is running. If not, start this service. :* Analyze JAVA exceptions...) |
|||
| Line 20: | Line 20: | ||
:* How do I verify if EAAS instance is connected to the MR-PIM or verify that the MR link is active/enabled ? | :* How do I verify if EAAS instance is connected to the MR-PIM or verify that the MR link is active/enabled ? | ||
| - | + | Check if the MR-PIM is active by checking the MR-PIM command prompt window [status should be ACTIVE]. In a duplexed configuration, one of the sides should be ACTIVE and the other one should be IDLE. For example, If MR PG side B is active, then MR PG A MR-PIM should remain idle | |
| - | + | ||
| + | Verify OPEN_REQ and OPEN_CONF messages in MR-PIM logs and check if ROUTING_ENABLED_EVENT is sent from MR-PIM to EAAS. CIM will start sending all route requests only after this message is sent by the MR-PIM to EAAS | ||
Revision as of 10:21, 5 January 2011
Initial Start up Issues
EAAS instance not starting
- Verify from the System Console if EAAS process is running. If not, start this service.
- Analyze JAVA exceptions that may have been logged in eg_log_<Server_name>_EAAS-process.log.
Listener instances not starting
- Analyze JAVA exceptions that may be logged in eg_log_<server_name>_Listener-process.log.
- Analyze JAVA exceptions that may be logged in eg_log_<server_name>_Application Server.log
When trying to create a new listener instance, the error “You have exceeded the maximum number of instances allowed for this partition” is returned.
- Increase the maximum limit for number of instances in the Listener Process administration section of System Console.
- Click on partition node, and increase the maximum allowable instances in the services section.
CIM looses connectivity to ICM
- How do I verify if EAAS instance is connected to the MR-PIM or verify that the MR link is active/enabled ?
Check if the MR-PIM is active by checking the MR-PIM command prompt window [status should be ACTIVE]. In a duplexed configuration, one of the sides should be ACTIVE and the other one should be IDLE. For example, If MR PG side B is active, then MR PG A MR-PIM should remain idle Verify OPEN_REQ and OPEN_CONF messages in MR-PIM logs and check if ROUTING_ENABLED_EVENT is sent from MR-PIM to EAAS. CIM will start sending all route requests only after this message is sent by the MR-PIM to EAAS
