IOS IP SLAs for IPv6 White Paper - Revision history

Pzimmerm: Added IPv6 category

2010-11-15T21:24:04Z

Added IPv6 category

← Older revision		Revision as of 21:24, 15 November 2010
Line 131:		Line 131:

	[[Category:IP SLAs]]		[[Category:IP SLAs]]
		+	[[Category:IPv6]]

Etychon at 10:11, 15 September 2010

2010-09-15T10:11:02Z

← Older revision		Revision as of 10:11, 15 September 2010
Line 80:		Line 80:
	udp-jitter 2001::214:A8FF:FE7A:ED70 5566		udp-jitter 2001::214:A8FF:FE7A:ED70 5566
	ip sla schedule 1 start-time now		ip sla schedule 1 start-time now
		+
		+	==Configuration Examples using SNMP==
		+
		+	IP SLAs for IPv6 can be configured by SNMP using both CISCO-RTTMON-MIB and CISCO-RTTMON-IP-EXT-MIB together.
		+
		+	snmpset -v2c -c public 10.48.164.20
		+	rttMonCtrlAdminStatus.1 i 5
		+	rttMonCtrlAdminRttType.1 i 6
		+	rttMonEchoAdminProtocol.1 i 24
		+	rttMonCtrlAdminNvgen.1 i true
		+	rttMonEchoAdminTargetPort.1 i 23
		+	crttMonIPEchoAdminTargetAddrType.1 i ipv6
		+	crttMonIPEchoAdminTargetAddress.1 s "11:23:45:67:00:08:00:09:00:00:00:00:00:00:00:02"
		+	crttMonIPEchoAdminSourceAddrType.1 i ipv6
		+	crttMonIPEchoAdminSourceAddress.1 s "00:11:00:00:00:00:00:00:00:00:00:00:00:00:00:02"
		+
		+	Here is the detail of what was configured:
		+
		+	CISCO-RTTMON-MIB::rttMonCtrlAdminStatus.1 = INTEGER: createAndWait(5)
		+	CISCO-RTTMON-MIB::rttMonCtrlAdminRttType.1 = INTEGER: tcpConnect(6)
		+	CISCO-RTTMON-MIB::rttMonEchoAdminProtocol.1 = INTEGER: ipTcpConn(24)
		+	CISCO-RTTMON-MIB::rttMonCtrlAdminNvgen.1 = INTEGER: true(1)
		+	CISCO-RTTMON-MIB::rttMonEchoAdminTargetPort.1 = INTEGER: 23
		+	CISCO-RTTMON-IP-EXT-MIB::crttMonIPEchoAdminTargetAddrType.1 = INTEGER: ipv6(2)
		+	CISCO-RTTMON-IP-EXT-MIB::crttMonIPEchoAdminTargetAddress.1 = STRING: "11:23:45:67:00:08:00:09:00:00:00:00:00:00:00:02"
		+	CISCO-RTTMON-IP-EXT-MIB::crttMonIPEchoAdminSourceAddrType.1 = INTEGER: ipv6(2)
		+	CISCO-RTTMON-IP-EXT-MIB::crttMonIPEchoAdminSourceAddress.1 = STRING: "00:11:00:00:00:00:00:00:00:00:00:00:00:00:00:02"
		+
		+	And the operation configuration created on the router:
		+
		+	ip sla 1
		+	tcp-connect 3131:3A32:333A:3435:3A36:373A:3030:3A30 23 source-ip 3030:3A31:313A:3030:3A30:303A:3030:3A30
		+	ip sla schedule 1 start-time pending
		+

	==Additional Notes and Caveats==		==Additional Notes and Caveats==

Btai at 17:12, 28 July 2010

2010-07-28T17:12:52Z

← Older revision		Revision as of 17:12, 28 July 2010
Line 1:		Line 1:
	{{Template:Required Metadata}}		{{Template:Required Metadata}}
-
-	~~==Introduction==~~

	Cisco IOS IP Service Level Agreements (SLAs) are a portfolio of technology embedded in most devices that run Cisco IOS software that allows Cisco customers to analyze IPv4 and now IPv6 service levels for IPv6 applications and services, to increase productivity, to lower operational costs, and to reduce the frequency of network outages. IP SLAs uses active traffic monitoring--the generation of traffic in a continuous, reliable, and predictable manner--for measuring network performance.		Cisco IOS IP Service Level Agreements (SLAs) are a portfolio of technology embedded in most devices that run Cisco IOS software that allows Cisco customers to analyze IPv4 and now IPv6 service levels for IPv6 applications and services, to increase productivity, to lower operational costs, and to reduce the frequency of network outages. IP SLAs uses active traffic monitoring--the generation of traffic in a continuous, reliable, and predictable manner--for measuring network performance.

Btai at 17:12, 28 July 2010

2010-07-28T17:12:06Z

← Older revision		Revision as of 17:12, 28 July 2010
Line 1:		Line 1:
		+	{{Template:Required Metadata}}
		+
	==Introduction==		==Introduction==

Btai: /* Enabling IPv6 Routing and Configuring IPv6 Addressing */

2010-07-28T17:09:34Z

Enabling IPv6 Routing and Configuring IPv6 Addressing

← Older revision		Revision as of 17:09, 28 July 2010
Line 32:		Line 32:
	ipv6 address autconfig		ipv6 address autconfig

-	To learn more about IPv6 routing and address configuration, see [http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/15_1/ipv6_15_1_book.html Cisco IOS IPv6 Configuration Guide].	+	To learn more about IPv6 routing and address configuration, see the [http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/15_1/ipv6_15_1_book.html Cisco IOS IPv6 Configuration Guide].

	'''Note: At least one interface with an IPv6 address must be configured before configuring the IPv6 options in IP SLAs.'''		'''Note: At least one interface with an IPv6 address must be configured before configuring the IPv6 options in IP SLAs.'''

Btai: /* Enabling IPv6 Routing and Configuring IPv6 Addressing */

2010-07-28T17:08:19Z

Enabling IPv6 Routing and Configuring IPv6 Addressing

← Older revision		Revision as of 17:08, 28 July 2010
Line 32:		Line 32:
	ipv6 address autconfig		ipv6 address autconfig

-	To learn more about IPv6 routing and address configuration, see [http://www.cisco.com/~~univercd~~/cc/td/~~doc~~/~~product~~/~~software~~/~~ios122~~/~~122newft~~/~~122t/122t2/ipv6/ftipv6c~~.~~htm IPv6 for~~ Cisco IOS ~~Software~~].	+	To learn more about IPv6 routing and address configuration, see [http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/15_1/ipv6_15_1_book.html Cisco IOS IPv6 Configuration Guide].

	'''Note: At least one interface with an IPv6 address must be configured before configuring the IPv6 options in IP SLAs.'''		'''Note: At least one interface with an IPv6 address must be configured before configuring the IPv6 options in IP SLAs.'''

Btai at 16:53, 28 July 2010

2010-07-28T16:53:03Z

← Older revision		Revision as of 16:53, 28 July 2010
Line 96:		Line 96:
	* [http://www.cisco.com/en/US/customer/tech/tk869/tk769/technologies_white_paper09186a00801b1a1e.shtml Measuring Delay, Jitter, and Packet Loss with Cisco IOS SAA and RTTMON]		* [http://www.cisco.com/en/US/customer/tech/tk869/tk769/technologies_white_paper09186a00801b1a1e.shtml Measuring Delay, Jitter, and Packet Loss with Cisco IOS SAA and RTTMON]

-	[["Category":"IP SLAs"]]	+	[[Category:IP SLAs]]

Btai at 16:51, 28 July 2010

2010-07-28T16:51:56Z

← Older revision		Revision as of 16:51, 28 July 2010
Line 96:		Line 96:
	* [http://www.cisco.com/en/US/customer/tech/tk869/tk769/technologies_white_paper09186a00801b1a1e.shtml Measuring Delay, Jitter, and Packet Loss with Cisco IOS SAA and RTTMON]		* [http://www.cisco.com/en/US/customer/tech/tk869/tk769/technologies_white_paper09186a00801b1a1e.shtml Measuring Delay, Jitter, and Packet Loss with Cisco IOS SAA and RTTMON]

-	[["~~category~~":"IP SLAs"]]	+	[["Category":"IP SLAs"]]

Btai at 16:50, 28 July 2010

2010-07-28T16:50:44Z

← Older revision		Revision as of 16:50, 28 July 2010
Line 96:		Line 96:
	* [http://www.cisco.com/en/US/customer/tech/tk869/tk769/technologies_white_paper09186a00801b1a1e.shtml Measuring Delay, Jitter, and Packet Loss with Cisco IOS SAA and RTTMON]		* [http://www.cisco.com/en/US/customer/tech/tk869/tk769/technologies_white_paper09186a00801b1a1e.shtml Measuring Delay, Jitter, and Packet Loss with Cisco IOS SAA and RTTMON]

-	[["category":"~~ip sla~~"]]	+	[["category":"IP SLAs"]]

Btai: 1 revision

2010-07-28T16:33:43Z

1 revision

← Older revision

Revision as of 16:33, 28 July 2010