IOS Gatekeepr for CUVC MCU Configuration Example
From DocWiki
| Line 20: | Line 20: | ||
! | ! | ||
| - | |||
| - | |||
Latest revision as of 18:33, 4 June 2010
Contents |
Introduction
The purpose of this example is to show how to register a Cisco Unified Videoconferencing MCU in H.323 mode with Cisco IOS Gatekeeper at address 10.93.245.65.
Design
The MCU has service prefix 83. On Cisco Unified Communication Manager, you would create an entry for a Gatekeeper and point it to 10.93.245.65. Then you would create a route pattern of 83XXXX for this H.323 trunk. Finally, you would register your H.323 conference room endpoints to this IOS Gatekeeper.
Configuration
Pod1-CUBE# sh run | b gatekeeper gatekeeper
zone local POD1 test.com 10.93.245.65 zone prefix POD1 83* gw-type-prefix 1#* default-technology no shutdown
!
Related show Commands
This section provides information you can use to confirm your configuration is working properly.
Pod1-CUBE#sh gatekeeper ?
calls Display current gatekeeper call status circuits Display current gatekeeper circuits clusters Display gatekeeper cluster info endpoints Display all endpoints registered with this gatekeeper gw-type-prefix Display Gateway Technology Prefix Table performance Display gatekeeper performance data servers Display gatekeeper servers info status Display current gatekeeper status zone Display zone information
Pod1-CUBE#sh gatekeeper end
GATEKEEPER ENDPOINT REGISTRATION
================================
CallSignalAddr Port RASSignalAddr Port Zone Name Type Flags
----- --------------- ----- --------- ---- -----
10.93.245.53 1720 10.93.245.53 1719 POD1 H320-GW
H323-ID: Cisco MCU-010093245053 Voice Capacity Max.= Avail.= Current.= 0
10.93.245.67 33096 10.93.245.67 32816 POD1 VOIP-GW
H323-ID: GK_1 Voice Capacity Max.= Avail.= Current.= 0
Total number of active registrations = 2
Pod1-CUBE#sh gatekeeper gw GATEWAY TYPE PREFIX TABLE
=============
Prefix: 1#* (Default gateway-technology)
Zone POD1 master gateway list: 10.93.245.67:33096 GK_1
Prefix: 72*
Zone POD1 master gateway list: 10.93.245.53:1720 Cisco MCU-010093245053
Prefix: 70*
Zone POD1 master gateway list: 10.93.245.53:1720 Cisco MCU-010093245053
Prefix: 80*
Zone POD1 master gateway list: 10.93.245.53:1720 Cisco MCU-010093245053
Prefix: 84*
Zone POD1 master gateway list: 10.93.245.53:1720 Cisco MCU-010093245053
Prefix: 71*
Zone POD1 master gateway list: 10.93.245.53:1720 Cisco MCU-010093245053
Prefix: 81*
Zone POD1 master gateway list: 10.93.245.53:1720 Cisco MCU-010093245053
Prefix: 83*
Zone POD1 master gateway list: 10.93.245.53:1720 Cisco MCU-010093245053
Prefix: 87*
Zone POD1 master gateway list: 10.93.245.53:1720 Cisco MCU-010093245053
Prefix: 85*
Zone POD1 master gateway list: 10.93.245.53:1720 Cisco MCU-010093245053
Pod1-CUBE#
Show running-config
! version 15.0 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname Pod1-CUBE ! boot-start-marker boot-end-marker !
no aaa new-model ! ! ! ! no ipv6 cef ip source-route ip cef ! ! ! ! ! multilink bundle-name authenticated ! ! ! ! ! ! ! voice-card 0 ! ! ! redundancy ! ! ! ! ! ! ! ! ! interface GigabitEthernet0/0
ip address 10.93.245.65 255.255.255.0 duplex auto speed auto !
! interface GigabitEthernet0/1
no ip address shutdown duplex auto speed auto !
! interface GigabitEthernet0/2
no ip address shutdown duplex auto speed auto !
! ip forward-protocol nd ! no ip http server no ip http secure-server ! ip route 0.0.0.0 0.0.0.0 10.93.245.1 ! control-plane
!
! gatekeeper
zone local POD1 test.com 10.93.245.65 zone prefix POD1 83* gw-type-prefix 1#* default-technology no shutdown
! ! end
Related Information
http://www.cisco.com/en/US/products/sw/voicesw/index.html
Videoconferencing SRND http://www.cisco.com/en/US/docs/video/cuvc/design/guides/srnd/vidcompo.html
