ICM Administration: "Select into/bulkcopy" option is Missing on the Local Database (awdb) or Logger database

From DocWiki

Revision as of 23:53, 12 March 2010 by Cchetty (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

"Select into/bulkcopy" option is Missing on the Local Database (awdb) or Logger database

Problem Summary The "Select into/bulkcopy" option is missing on the local database (awdb) or Logger database
Error Message No message
Possible Cause The database was dropped at some point and not recreated properly. (The proper method would have been to use ICMDBA, which would have set the following default database options during the database creation: Trunc. log on chkpt.; Select into/bulkcopy.)
Recommended Action
  • In either case, you could recreate this database option — on the Administration & Data Server or the Logger, as appropriate.
  • -OR-
  • If this database option is missing on the local database (awdb):

Delete the local database (awdb). Run the Web Setup tool, which recreates the local database (awdb). -OR- If this database option is missing on the Logger database, recreate the database using the sp_db option in order to add the Select into/bulkcopy option.

Release Release 7.5(1) and 8.0
Associated CDETS # None.

Rating: 3.0/5 (1 vote cast)

Personal tools