HRC does not show reports for the specified data range.

From DocWiki

Revision as of 07:04, 7 March 2011 by Prkatti (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Problem Summary HRC does not show reports for the specified date range.
Error Message No data found for the selected date range.
Possible Cause The HRC pulls the report from the subscriber node. It is likely that the subscriber data is not in sync with the publisher data.
Recommended Action - execute the stored procedure from the command line on the publisher and subscriber. 
 - if the data is found on the publisher and not on the subscriber perform a "reset DB replication".
 - if the above step does not work, perform a "utils dbreplication forcedatasyncsub" from the publisher CLI followed by 
   a reset db replication.
Release Release 8.0, Release 8.5
Associated CDETS #

Rating: 0.0/5 (0 votes cast)

Retrieved from "http://docwiki.cisco.com/wiki/HRC_does_not_show_reports_for_the_specified_data_range."
Personal tools