Genesys T-Server: T-Server can’t connect to CTI-Server

From DocWiki

(Difference between revisions)
Jump to: navigation, search
m (New page: <h2> T-Server can't connect to CTI-Server.</h2> <table border="1"> <tr> <th> <b>Problem Summary</b> </th><td> It appears (Maybe in the T-Server logs) that the T-Server is attempting to co...)
m
Line 18: Line 18:
<th> <b>Recommended Action</b>
<th> <b>Recommended Action</b>
</th><td>  
</th><td>  
 +
Is CTI-Server up and accepting connections (Look in the title Bar) - If not correct and retry.
 +
If no OPEN_REQ is seen in the CTI-Server log check the Genesys Host/Port configuration and retry.
If no OPEN_REQ is seen in the CTI-Server log check the Genesys Host/Port configuration and retry.

Revision as of 21:08, 26 April 2010

T-Server can't connect to CTI-Server.

Problem Summary It appears (Maybe in the T-Server logs) that the T-Server is attempting to connect to CTi-server but is unsuccessful.
Error Message Many - Non-Specific.
Possible Cause

Incorrect T-Server Host/Port configuration. CTI-Server not 8.0(2) or above

Recommended Action

Is CTI-Server up and accepting connections (Look in the title Bar) - If not correct and retry.

If no OPEN_REQ is seen in the CTI-Server log check the Genesys Host/Port configuration and retry.

If an OPEN_REQ is seen and an OPEN_CONF is seen the open handshake looks good, pursue Genesys T-Server troubleshooting.

If an OPEN_REQ is seen in the CTI-Server log but a FAILURE_CONF is seen instead look at the failure reason. If a mal-formed message or invalid mask pursue T-Server troubleshooting. One reason would be if CTI-Server was pre 8.0 (CTI V14 or above and 8.0(2)+) is required.


Release Release 8.0(2)
Associated CDETS # N/A

Rating: 0.0/5 (0 votes cast)

Personal tools