FACT show multicast destinations

From DocWiki

Revision as of 18:18, 12 June 2008 by Lorlando (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search


To show the multicast destinations that are forwarded through each specified egress port, use the show multicast destinations command.


show multicast destinations [switches | ports] [to multicast-groups]


Syntax Description

switches (Optional) Shows only the destinations from the specified switch ports.
ports (Optional) Shows only the destinations from the specified ports.
to (Optional) Identifies the destination multicast group set.
multicast-groups (Optional) Shows only the destinations for the specified multicast groups.


Command Default

If no port is specified, the default view is the port view. If multicast-groups is not specified, all multicast destinations forwarded through each specified egress ports are shown.


Examples

The followingis sample output from the show multicast destinations command, and it shows all multicast destinations that egress chip switchB/1:1 through port 7:
  fact> show multicast destinations switchB/1:1/7
  
  
  Egress port switchB/1/7:
  mgid                                            mlid
  ----------------------------------------------- -----
  ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff 49152
  ff:12:40:1b:ff:ff:00:00:00:00:00:00:00:00:00:01 49153


Related Commands

show destinations
show egress ports
show multicast routes
show multicast egress ports
show routes

Rating: 0.0/5 (0 votes cast)

Personal tools