FACT show destinations

From DocWiki

Revision as of 21:36, 2 May 2008 (view source) Lorlando (Talk | contribs) ← Older edit		Latest revision as of 18:18, 12 June 2008 (view source) Lorlando (Talk | contribs)
Line 1:		Line 1:
-	<span style="color:red">'''Note''': This command is not implemented in the FACT Alpha II release.</span>	+

---

Latest revision as of 18:18, 12 June 2008

To show the unicast destinations that are forwarded through each specified egress port, use the show destinations command.

show destinations [switches | ports] [guids]

Syntax Description

switches	(Optional) Shows destinations from the specified switch ports.
ports	(Optional) Shows destinations from the specified ports.
guids	(Optional) Shows GUIDs for each destination.

Command Default

If no port is specifed, then the default is to show all ports.

Examples

The following is sample output from the show destinations command, and it shows all unicast destinations that egress chip switchA/1/3 through port 1:

  fact> show destinations switchA/1:3/1
  
  
  Egress port switchA/1:3/1:
  destination                      lid
  -------------------------------- -----
  switchA/1:2/0                    16
  host01/1/1                       792

Related Commands

show egress ports

show multicast destinations

show multicast egress ports

show multicast routes

show routes