FACT show counters threshold

From DocWiki

Revision as of 18:17, 12 June 2008 by Lorlando (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search


To display the monitored port counters, use the show counters threshold command.


show counters threshold [chassis | chips | ports] [error]



Syntax Description

chassis (Optional) Displays only the counters for the ports in the specified chassis.
chips (Optional) Displays only the counters for the ports in the specified chips.
ports (Optional) Displays only the counters for the specified ports.
error (Optional) Displays only those counters that are both error counters and non-zero counters. Some counters, such as xmit-pkts, count non-error events. These counters are not shown.


Command Default

No default behavior or values.


Usage Guidelines

If the current scan does not include threshold port counters, then this command fails.


Examples

The following is sample output from the show counters threshold command, and it shows all counters in the subnet that have exceeded their error thresholds:
  fact> show counters threshold
  
  port                           counter                              value
  ------------------------------ ----------------------------- ------------
  port: switchB/1/3              symbol_errors                        65535
  ngbr: switchA/1/3              
  - - - - - - - - - - - - - - -  - - - - - - - - - - - - - - -  - - - - - - 
  port: switchB/1/6              symbol_errors                        65535
  ngbr:                          
  - - - - - - - - - - - - - - -  - - - - - - - - - - - - - - -  - - - - - - 


Related Commands

reset port-counters
scan fabric
scan fabric all
show counters monitored
show counters raw

Rating: 0.0/5 (0 votes cast)

Personal tools