FACT show counters monitored
From DocWiki
To display the monitored port counters, use the show counters monitored command.
- show counters monitored [chassis | chips | ports] [error]
Syntax Description
chassis (Optional) Displays only the counters for the ports in the specified chassis. chips (Optional) Displays only the counters for the ports in the specified chips. ports (Optional) Displays only the counters for the specified ports. error (Optional) Displays only those counters that are both error counters and non-zero counters. Some counters, such as xmit-pkts, count non-error events. These counters are not shown.
Command Default
- No default behavior or values.
Usage Guidelines
- If the current scan does not include monitored port counters, then this command fails.
- FACT does not display information for ports that have zero error counters only.
Examples
- The following is sample output from the show counters monitored command, and it shows the monitored counters that have a non-zero error count:
fact> show counters monitored error port counter value ------------------------------ ----------------------------- ------------ port: switchB/1/3 symbol_errors 65535 ngbr: switchA/1/3 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - port: switchB/1/6 symbol_errors 65535 ngbr: - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Related Commands
