FACT show changes

From DocWiki

Revision as of 18:16, 12 June 2008 by Lorlando (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

To compare the current scan with any specified scan in the repository, use the show changes command.

show changes scan scan [chassis | chips | ports | subnet-managers | sm]

Syntax Description

scan Specifies the number of a particular scan to compare with the current scan.
chassis (Optional) Shows changes for only the specified chassis.
chips (Optional) Shows changes for only the specified chips.
ports (Optional) Shows changes for only the specified ports.
subnet-managers / sm (Optional) Reports changes to the subnet managers only.

Command Default

No default behavior or values.


The following is sample output from the show changes command, and it shows the changes between scan 31 and the current scan:
  fact> show changes scan 31
  Old scan: 2007-10-23 05:46:14 PDT
  New scan: 2007-11-01 12:02:21 PDT
  No changes.
  Removed switch04/4:1
  Removed switch04/4:2
  Removed switch04/4:3
  Added switch06/3:1
  Added switch06/3:2
  Added switch06/3:3
  Removed switch02/1/1 neighbor switch04/4/1
  Added switch02/1/1 neighbor switch06/3/1
  Subnet Managers:
  Removed master host08/1/1
  Removed standby host03/1/2
  Added master host03/1/2
  Added standby host12/1/1

Related Commands

show chassis
show chips
show history
show ports
show subnet-managers

Rating: 0.0/5 (0 votes cast)

Personal tools