FACT scan fabric

Revision as of 18:16, 12 June 2008 by Lorlando (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

To scan the static connectivity of the subnet and collect information from and about the Subnet Managers, use the scan fabric command.

scan fabric [routes] [raw-counters] [monitored-counters] [threshold-counters] [subnet-manager | sm managed-node]

Syntax Description

routes	(Optional) Collects routing information from the master Subnet Manager.
raw-counters	(Optional) Collects raw port counters from the master Subnet Manager.
monitored-counters	(Optional) Collects monitored port counters from the master Subnet Manager.
threshold-counters	(Optional) Collects threshold-exceeded port counters.
subnet-manager	(Optional) Overrides the discovered master Subnet Manager.
sm	(Optional) Overrides the discovered master Subnet Manager.
managed-node	(Optional) Scans the configured managed-nodes.

Command Default

No default behavior or values.

Usage Guidelines

The scan will fail if the specified managed-node is not a master Subnet Manager.

Examples

The following example shows scanning the fabric and also collecting route information and raw port counter information:

  fact> scan fabric routes raw-counters
  Scanning host01
  Scanning switchA
  Scanning switchB
  Scanning Master Subnet Manager at host01

Related Commands

scan fabric all

Rating: 0.0/5 (0 votes cast)