Enabling CME Tracing
From DocWiki
(Difference between revisions)
(New page: == Enabling CME Tracing == {| border="1" |- ! '''Problem Summary''' | Any issue which requires CME tracing to be enabled. |- ! '''Error Message''' | NA |- ! '''Possible Cause''' | NA |- !...) |
m (1 revision) |
Latest revision as of 15:20, 9 April 2010
Enabling CME Tracing
| Problem Summary | Any issue which requires CME tracing to be enabled. |
|---|---|
| Error Message | NA |
| Possible Cause | NA |
| Recommended Action | 1. Enable the traces by running the following command on the CME console.
service timestamps debug datetime msec
service timestamps log datetime msec
logging buffered 1000000
logging rate-limit 10000
no logging console
sh ver
sh run
sh sip-ua
deb ccsip all
deb voip ccapi inout
deb voip vtsp all
debug callmon info
sh deb 2. Perform all the tests.
u all 4. Get the contents of the log buffer using the following command. sh logging |
| Release | Release 5.0(1) onwards |
| Associated CDETS # | The DDTS/CDETS should be visible on Bug Tool Kit. If it not visible, state "None." Do not list internal bugs in this field. |
