ZBFW is a feature set of IOSFW where we assign the router interfaces into different zones depending upon the requirement. This way we are applying inspection to the traffic moving between zones not interfaces. While using ZBFW we have more flexibility as compared to CBAC.In CBAC we configure inspection policies with ACL rules to define the IOSFW feature set however these inspection policies and ACL rules are applicable to all the traffic leaving or entering a respective interface of the router. In ZBFW we can use object-groups or ACLS to perform inspection of interested traffic along with class-maps and policy-maps which in turns provide more flexibility as compared to CBAC.Also multiple inspection rules and ACL on several interfaces of router make it more difficult to correlate the policies that will be applied to traffic flow between multiple interfaces as in case of CBAC.
ZBFW offers following features
- Application inspection
- Statefull inspection
- Local URL filtering
- Transparent firewall
Things to remember about ZBFW
- The policies configured from one zone to another are unidirectional in nature.
- By default the traffic flow between the inter-zones is “DENY ALL”.
- By default the traffic flow to or from “SELF” zone to another zone is “ALLOW ALL” and we can restrict the same with the help of class-maps along with respective actions.
- By default the traffic flow between the intra-zones is “Allow ALL” and we can’t restrict or apply any kind of inspection to the same.
- An interface can be assigned to only one security zone.
- Traffic cannot flow between a zone-member interface and any interface which is not a *zone-member, so that means every interface should be assigned to a zone.
- We can apply multiple classes along with respective action per zone-pair.
Steps to configure ZBFW
- Identify and define network zones.
- Determine the traffic flow between the respective zones.
- Define class-maps to describe traffic between zones.
- Associate class-maps with policy-maps to define actions to the respective traffic flow.
- Set up zone pairs for any policy other than deny all.
- Assign policy-maps to zone-pairs.
- Now assign interfaces to zones.
- The final step would be validate the configuration by passing some interested traffic.
Server—–R1(ZBFW)—-Client Client :- 10.10.10.2 R1 LAN interface:- 10.10.10.1 R1 WAN interface:- 188.8.131.52 Server :- 184.108.40.206
ZBFW(config)#zone sec out ZBFW(config-sec-zone)#exit ZBFW(config)#zone sec in ZBFW(config-sec-zone)#exit ZBFW(config)#ip access-list exte insp-traffic ZBFW(config-ext-nacl)#permit ip 10.10.10.0 0.0.0.255 any ZBFW(config-ext-nacl)#exit ZBFW(config)#class-map type inspect match-any insp-traffic ZBFW(config-cmap)#match access-group name insp-traffic ZBFW(config-cmap)#exit ZBFW(config)#class-map type inspect match-any insp-traffic-protocol ZBFW(config-cmap)#match protocol tcp ZBFW(config-cmap)#match protocol udp ZBFW(config-cmap)#match protocol icmp ZBFW(config-cmap)#exit ZBFW(config)#class-map type inspect match-all inspection-outbound ZBFW(config-cmap)#match class insp-traffic ZBFW(config-cmap)#match class insp-traffic-protocol ZBFW(config-cmap)#exit ZBFW(config)#policy-map type inspect outbound ZBFW(config-pmap)#class inspection-outbound ZBFW(config-pmap-c)#insp ZBFW(config-pmap-c)#inspect ZBFW(config-pmap-c)#exit ZBFW(config-pmap)#exit ZBFW(config)#zone-pair sec in-out source in destination out ZBFW(config-sec-zone-pair)#service-policy type inspect outbound ZBFW(config-sec-zone-pair)#exit ZBFW(config)# ZBFW(config)#int f0/0 ZBFW(config-if)#zone-member security out ZBFW(config-if)#exit ZBFW(config)#int f0/1 ZBFW(config-if)#zone-member security in ZBFW(config-if)#exit ZBFW(config)#
Related show Commands
This section provides information you can use to confirm your configuration is working properly.
Certain show commands are supported by the Output Interpreter Tool (registered customers only), which allows you to view an analysis of show command output.
ZBFW#sh policy-map type inspect zone-pair in-out sessions Zone-pair: in-out
Service-policy inspect : outbound
Class-map: inspection-outbound (match-all) Match: class-map match-any insp-traffic Match: access-group name insp-traffic 4 packets, 135 bytes 30 second rate 0 bps Match: class-map match-any insp-traffic-protocol Match: protocol tcp 1 packets, 28 bytes 30 second rate 0 bps Match: protocol udp 2 packets, 67 bytes 30 second rate 0 bps Match: protocol icmp 1 packets, 40 bytes 30 second rate 0 bps Inspect Established Sessions Session 669F65F4 (10.10.10.2:1086)=>(220.127.116.11:23) tcp SIS_OPEN Created 00:00:18, Last heard 00:00:13 Bytes sent (initiator:responder) [45:84] Session 669F6064 (10.10.10.2:8)=>(18.104.22.168:0) icmp SIS_OPEN Created 00:02:14, Last heard 00:00:00 ECHO request Bytes sent (initiator:responder) [4320:4288]
Class-map: class-default (match-any) Match: any Drop (default action) 1 packets, 219 bytes