Default Value and Value Range Differences

From DocWiki

Jump to: navigation, search

Default Value and Value Range Differences

The following table lists the differences in default values and value ranges between ASA and FWSM.

FWSM ASA
Minimum failover poll time is 500 milliseconds.

CLI: failover polltime msec

Minimum failover poll time in milliseconds is 200.

CLI: failover polltime msec

Minimum poll interval for interfaces is 3 seconds.

CLI: failover polltime interface

Minimum poll interval for interfaces is 1 second. ASA also supports milliseconds and the minimum millisec interval is 500.

CLI: failover polltime interval failover polltime interval msec

Minimum failover unit poll time is 500 milliseconds.

CLI: failover polltime unit msec

Miminum failover unit poll time is 200 milliseconds.

CLI: failover polltime unit msec

Resource limits:

Conns = 999,900

Cons/Sec = 102,400

Fixups/Sec = 10,000

Hosts = 256K

Syslogs/sec = 30,000

Xlates = 256K

ASA does not have resource limits for the resources mentioned in the FWSM column.
SIP Disconnect Timeout:

minimum = 1 minute

maximum = 10 minutes

CLI: timeout sip-disconnect

SIP Disconnect Timeout:

mimimum = 1 minute

maximum = 1193 minutes

CLI: timeout sip-disconnect

SIP Invite Timeout:

maximum = 30 minutes

CLI: timeout sip-invite

SIP Invite Timeout:

maximum = 1193 minutes

CLI: timeout sip-invite

XLATE Timeout:

mimimum = 30 seconds

CLI: timeout xlate

Xlate Timeout:

minimum = 1 minute

CLI: timeout xlate

Rating: 0.0/5 (0 votes cast)

Personal tools