Default Value and Value Range Differences

Revision as of 21:49, 28 August 2009 by Lorlando (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

The following table lists the differences in default values and value ranges between ASA and FWSM.

FWSM	ASA
Minimum failover poll time is 500 milliseconds. CLI: failover polltime msec	Minimum failover poll time in milliseconds is 200. CLI: failover polltime msec
Minimum poll interval for interfaces is 3 seconds. CLI: failover polltime interface	Minimum poll interval for interfaces is 1 second. ASA also supports milliseconds and the minimum millisec interval is 500. CLI: failover polltime interval failover polltime interval msec
Minimum failover unit poll time is 500 milliseconds. CLI: failover polltime unit msec	Miminum failover unit poll time is 200 milliseconds. CLI: failover polltime unit msec
Resource limits: Conns = 999,900 Cons/Sec = 102,400 Fixups/Sec = 10,000 Hosts = 256K Syslogs/sec = 30,000 Xlates = 256K	ASA does not have resource limits for the resources mentioned in the FWSM column.
SIP Disconnect Timeout: minimum = 1 minute maximum = 10 minutes CLI: timeout sip-disconnect	SIP Disconnect Timeout: mimimum = 1 minute maximum = 1193 minutes CLI: timeout sip-disconnect
SIP Invite Timeout: maximum = 30 minutes CLI: timeout sip-invite	SIP Invite Timeout: maximum = 1193 minutes CLI: timeout sip-invite
XLATE Timeout: mimimum = 30 seconds CLI: timeout xlate	Xlate Timeout: minimum = 1 minute CLI: timeout xlate

Rating: 0.0/5 (0 votes cast)