Data Center Multi-Layer VPC Design Aggregation Layer Failure Scenarios (LACP) Configuration Example: Part I

From DocWiki

(Difference between revisions)
Jump to: navigation, search
(Baseline Configurations for VPC on all routers)
(Baseline Configurations for VPC on all routers)
Line 500: Line 500:
!Command: show running-config interface port-channel100
!Command: show running-config interface port-channel100
-
!Time: Tue Aug 11 22:58:48 2009
 
version 4.2(1)
version 4.2(1)
Line 514: Line 513:
!Command: show running-config interface port-channel200
!Command: show running-config interface port-channel200
-
!Time: Tue Aug 11 22:58:53 2009
+
 
version 4.2(1)
version 4.2(1)
Line 528: Line 527:
!Command: show running-config interface port-channel300
!Command: show running-config interface port-channel300
-
!Time: Tue Aug 11 22:58:58 2009
+
 
version 4.2(1)
version 4.2(1)
Line 542: Line 541:
!Command: show running-config interface port-channel600
!Command: show running-config interface port-channel600
-
!Time: Tue Aug 11 22:59:07 2009
+
 
version 4.2(1)
version 4.2(1)
Line 555: Line 554:
!Command: show running-config interface port-channel3000
!Command: show running-config interface port-channel3000
-
!Time: Tue Aug 11 22:59:10 2009
+
 
version 4.2(1)
version 4.2(1)
Line 588: Line 587:
!Command: show running-config interface Ethernet3/1
!Command: show running-config interface Ethernet3/1
-
!Time: Tue Aug 11 22:59:21 2009
+
 
version 4.2(1)
version 4.2(1)
Line 604: Line 603:
!Command: show running-config interface Ethernet2/1
!Command: show running-config interface Ethernet2/1
-
!Time: Tue Aug 11 22:59:28 2009
+
 
version 4.2(1)
version 4.2(1)
Line 653: Line 652:
!Command: show running-config vpc
!Command: show running-config vpc
-
!Time: Tue Aug 11 23:02:33 2009
+
 
version 4.2(1)
version 4.2(1)
Line 686: Line 685:
!Command: show running-config interface port-channel10
!Command: show running-config interface port-channel10
-
!Time: Tue Aug 11 23:04:00 2009
+
 
version 4.2(1)
version 4.2(1)
Line 700: Line 699:
!Command: show running-config interface port-channel20
!Command: show running-config interface port-channel20
-
!Time: Tue Aug 11 23:04:00 2009
+
 
version 4.2(1)
version 4.2(1)
Line 714: Line 713:
!Command: show running-config interface port-channel100
!Command: show running-config interface port-channel100
-
!Time: Tue Aug 11 23:04:01 2009
+
 
version 4.2(1)
version 4.2(1)
Line 728: Line 727:
!Command: show running-config interface port-channel200
!Command: show running-config interface port-channel200
-
!Time: Tue Aug 11 23:04:01 2009
+
 
version 4.2(1)
version 4.2(1)
Line 742: Line 741:
!Command: show running-config interface port-channel300
!Command: show running-config interface port-channel300
-
!Time: Tue Aug 11 23:04:01 2009
+
 
version 4.2(1)
version 4.2(1)
Line 756: Line 755:
!Command: show running-config interface port-channel600
!Command: show running-config interface port-channel600
-
!Time: Tue Aug 11 23:04:01 2009
+
 
version 4.2(1)
version 4.2(1)
Line 769: Line 768:
!Command: show running-config interface port-channel3000
!Command: show running-config interface port-channel3000
-
!Time: Tue Aug 11 23:04:02 2009
+
 
version 4.2(1)
version 4.2(1)
Line 803: Line 802:
!Command: show running-config interface Ethernet3/1
!Command: show running-config interface Ethernet3/1
-
!Time: Tue Aug 11 23:04:11 2009
+
 
version 4.2(1)
version 4.2(1)
Line 819: Line 818:
!Command: show running-config interface Ethernet2/1
!Command: show running-config interface Ethernet2/1
-
!Time: Tue Aug 11 23:04:14 2009
+
 
version 4.2(1)
version 4.2(1)
Line 870: Line 869:
!Command: show running-config vpc
!Command: show running-config vpc
-
!Time: Tue Aug 11 23:05:50 2009
+
 
version 4.2(1)
version 4.2(1)
Line 892: Line 891:
!Command: show running-config interface port-channel300
!Command: show running-config interface port-channel300
-
!Time: Tue Aug 11 23:05:55 2009
+
 
version 4.2(1)
version 4.2(1)
Line 906: Line 905:
!Command: show running-config interface port-channel500
!Command: show running-config interface port-channel500
-
!Time: Tue Aug 11 23:06:01 2009
+
 
version 4.2(1)
version 4.2(1)
Line 919: Line 918:
!Command: show running-config interface port-channel4000
!Command: show running-config interface port-channel4000
-
!Time: Tue Aug 11 23:06:07 2009
+
 
version 4.2(1)
version 4.2(1)
Line 947: Line 946:
!Command: show running-config interface Ethernet2/9
!Command: show running-config interface Ethernet2/9
-
!Time: Tue Aug 11 23:06:17 2009
+
 
version 4.2(1)
version 4.2(1)
Line 963: Line 962:
!Command: show running-config interface Ethernet2/17
!Command: show running-config interface Ethernet2/17
-
!Time: Tue Aug 11 23:06:22 2009
+
 
version 4.2(1)
version 4.2(1)
Line 978: Line 977:
!Command: show running-config interface Ethernet2/1
!Command: show running-config interface Ethernet2/1
-
!Time: Tue Aug 11 23:06:25 2009
+
 
version 4.2(1)
version 4.2(1)
Line 1,023: Line 1,022:
!Command: show running-config vpc
!Command: show running-config vpc
-
!Time: Tue Aug 11 23:08:08 2009
+
 
version 4.2(1)
version 4.2(1)
Line 1,044: Line 1,043:
!Command: show running-config interface port-channel300
!Command: show running-config interface port-channel300
-
!Time: Tue Aug 11 23:08:13 2009
+
 
version 4.2(1)
version 4.2(1)
Line 1,058: Line 1,057:
!Command: show running-config interface port-channel500
!Command: show running-config interface port-channel500
-
!Time: Tue Aug 11 23:08:17 2009
+
 
version 4.2(1)
version 4.2(1)
Line 1,071: Line 1,070:
!Command: show running-config interface port-channel4000
!Command: show running-config interface port-channel4000
-
!Time: Tue Aug 11 23:08:22 2009
+
 
version 4.2(1)
version 4.2(1)
Line 1,099: Line 1,098:
!Command: show running-config interface Ethernet2/9
!Command: show running-config interface Ethernet2/9
-
!Time: Tue Aug 11 23:08:32 2009
+
 
version 4.2(1)
version 4.2(1)
Line 1,114: Line 1,113:
!Command: show running-config interface Ethernet2/17
!Command: show running-config interface Ethernet2/17
-
!Time: Tue Aug 11 23:08:35 2009
+
 
version 4.2(1)
version 4.2(1)
Line 1,128: Line 1,127:
!Command: show running-config interface Ethernet2/1
!Command: show running-config interface Ethernet2/1
-
!Time: Tue Aug 11 23:08:38 2009
+
 
version 4.2(1)
version 4.2(1)

Revision as of 16:19, 2 November 2010

Contents

Introduction

Test Details: GOALS OF THE TEST

Data Center Multi-Layer VPC design aggregation layer failure scenarios are depicted in this document. The tests involve a multiple VPC domain design with VPC extended from Core to Aggregation as well as Aggregation to Access. The Failure scenarios covered in this test document are the following:

  • Failure of the Peer Keepalive link - simulated by the shutdown of Ethernet1/1 on AGG1 router
  • Failure of a single link in the Peer-link bundle - simulated by shutting down either Ethernet2/1 on the AGG1 router
  • Failure of the peer-link port-channel - simulated by shutting down the Port-channel 3000 interface between AGG1 and AGG2 routers
  • SFM module failure on Aggregation router
  • Supervisor failure/switchover on an aggregation router
  • Linecard failure on the AGG1 router
  • Failure of an aggregation node

DATA TO RECORD

Verification of operation of VPC and its configuration using the following commands:

  • show vpc brief
  • show port-channel summary
  • show port-channel traffic
  • show run int port-channel xxxx
  • show run vpc

ESTIMATED TIME: 120 minutes

Design

Sample topology.jpg

Procedures

1. This document highlights the failure scenarios with the above mentioned topology in the Aggregation layer.

2. The following failures were conducted on the Aggregation layer to verify the operation and resiliency of VPC in a multi-domain VPC environment with the entire Data Center running on VPC.

  • Failure of the Peer Keepalive link - simulated by the shutdown of Ethernet1/1 on AGG1 router
  • Failure of a single link in the Peer-link bundle- Simulated by shutting down either Ethernet2/1 on the AGG1 router
  • Failure of the peer-link port-channel- Simulated by shutting down the Port-channel 3000 interface between AGG1 and AGG2 routers
  • SFM module failure on Aggregation router
  • Supervisor Failure/switchover on an aggregation router
  • Linecard failure on the AGG1 router
  • Failure of an aggregation node

Baseline Configurations for VPC on all routers

Configs for Core1-VDC1

CORE1-F10# show run vpc

!Command: show running-config vpc

version 4.2(1)
feature vpc

vpc domain 1
  peer-keepalive destination 11.21.1.2 source 11.21.1.1 vrf peerkeepalive


interface port-channel50
  vpc 50

interface port-channel100
  vpc 100

interface port-channel1000
  vpc peer-link
 
CORE1-F10# show run int vlan 100

!Command: show running-config interface Vlan100


version 4.2(1)

interface Vlan100
  no shutdown
  description Server Subnet - Vlan 100
  ip address 100.100.11.1/24
  ip router ospf 100 area 0.0.0.0
  hsrp 100
    preempt delay minimum 15
    priority 120
    timers  1  3
    ip 100.100.11.254

CORE1-F10# show run int port-channel 50

!Command: show running-config interface port-channel50

version 4.2(1)

interface port-channel50
  description Port-Channel to Northbound Spirent Test Port (via 6500)
  switchport
  switchport mode trunk
  vpc 50
  switchport trunk allowed vlan 1,100
  spanning-tree port type edge trunk
  spanning-tree bpdufilter enable

CORE1-F10# show run int port-channel 100

!Command: show running-config interface port-channel100


version 4.2(1)

interface port-channel100
  description vPC to Aggregation Layer
  switchport
  switchport mode trunk
  vpc 100
  switchport trunk allowed vlan 1,100

CORE1-F10# show run int port-channel 1000

!Command: show running-config interface port-channel1000


version 4.2(1)

interface port-channel1000
  description vPC Peerlink (eth 2/1,eth 4/1)
  switchport
  switchport mode trunk
  vpc peer-link
  switchport trunk allowed vlan 1,50,100
  spanning-tree port type network

CORE1-F10# show port-channel summary
Flags:  D - Down        P - Up in port-channel (members)
        I - Individual  H - Hot-standby (LACP only)
        s - Suspended   r - Module-removed
        S - Switched    R - Routed
        U - Up (port-channel)
--------------------------------------------------------------------------------
Group Port-       Type     Protocol  Member Ports
      Channel
--------------------------------------------------------------------------------
50    Po50(SU)    Eth      LACP      Eth2/26(P)
100   Po100(SU)   Eth      LACP      Eth2/9(P)    Eth2/10(P)
1000  Po1000(SU)  Eth      LACP      Eth2/1(P)    Eth4/1(P)
CORE1-F10# show run int eth 2/26

!Command: show running-config interface Ethernet2/26


version 4.2(1)

interface Ethernet2/26
  description Connection to Catalyst 6500 te5/1 (for Spirent Connectivity)
  switchport
  switchport mode trunk
  switchport trunk allowed vlan 1,100
  rate-mode dedicated force
  channel-group 50 mode active
  no shutdown

CORE1-F10# show run int eth 2/9

!Command: show running-config interface Ethernet2/9


version 4.2(1)

interface Ethernet2/9
  description Connection to AGG2 eth 2/17
  switchport
  switchport mode trunk
  switchport trunk allowed vlan 1,100
  rate-mode dedicated force
  channel-group 100 mode active
  no shutdown

CORE1-F10# show run int eth 2/10

!Command: show running-config interface Ethernet2/10


version 4.2(1)

interface Ethernet2/10
  description Connection to AGG1 eth 2/17
  switchport
  switchport mode trunk
  switchport trunk allowed vlan 1,100
  rate-mode dedicated force
  channel-group 100 mode active
  no shutdown

CORE1-F10# show run int eth 2/1

!Command: show running-config interface Ethernet2/1


version 4.2(1)

interface Ethernet2/1
  description vPC Peerlink Member Port #1 (por 1000)
  switchport
  switchport mode trunk
  switchport trunk allowed vlan 1,50,100
  rate-mode dedicated force
  udld aggressive
  channel-group 1000 mode active
  no shutdown

CORE1-F10# show run int eth 4/1

!Command: show running-config interface Ethernet4/1


version 4.2(1)

interface Ethernet4/1
  description vPC Peerlink Member Port #2 (por 1000)
  switchport
  switchport mode trunk
  switchport trunk allowed vlan 1,50,100
  rate-mode dedicated force
  udld aggressive
  channel-group 1000 mode active
  no shutdown

CORE1-F10# show vpc brief
Legend:
                (*) - local vPC is down, forwarding via vPC peer-link

vPC domain id                   : 1
Peer status                     : peer adjacency formed ok
vPC keep-alive status           : peer is alive
Configuration consistency status: success
vPC role                        : secondary
Number of vPCs configured       : 2
Peer Gateway                    : Disabled
Dual-active excluded VLANs      : -

vPC Peer-link status
---------------------------------------------------------------------
id   Port   Status Active vlans
--   ----   ------ --------------------------------------------------
1    Po1000 up     1,100

vPC status
----------------------------------------------------------------------
id   Port   Status Consistency Reason                     Active vlans
--   ----   ------ ----------- -------------------------- ------------
50   Po50   up     success     success                    1,100
100  Po100  up     success     success                    1,100       

Configs for Core2-VDC1

CORE2-F11# show run vpc

!Command: show running-config vpc


version 4.2(1)
feature vpc

vpc domain 1
  peer-keepalive destination 11.21.1.1 source 11.21.1.2 vrf peerkeepalive


interface port-channel50
  vpc 50

interface port-channel100
  vpc 100

interface port-channel1000
  vpc peer-link

CORE2-F11# show run int port-channel 50

!Command: show running-config interface port-channel50


version 4.2(1)

interface port-channel50
  description Port-Channel to Northbound Spirent Test Port (via 6500)
  switchport
  switchport mode trunk
  vpc 50
  switchport trunk allowed vlan 1,100
  spanning-tree port type edge trunk
  spanning-tree bpdufilter enable

CORE2-F11# show run int port-channel 100

!Command: show running-config interface port-channel100


version 4.2(1)

interface port-channel100
  description vPC to Aggregation Layer
  switchport
  switchport mode trunk
  switchport trunk allowed vlan 1,100
  vpc 100

CORE2-F11# show run int port-channel 1000

!Command: show running-config interface port-channel1000


version 4.2(1)

interface port-channel1000
  description vPC Peerlink (eth 2/1, eth 4/1)
  switchport
  switchport mode trunk
  vpc peer-link
  switchport trunk allowed vlan 1,100
  spanning-tree port type network

CORE2-F11# show port-channel summary
Flags:  D - Down        P - Up in port-channel (members)
        I - Individual  H - Hot-standby (LACP only)
        s - Suspended   r - Module-removed
        S - Switched    R - Routed
        U - Up (port-channel)
--------------------------------------------------------------------------------
Group Port-       Type     Protocol  Member Ports
      Channel
--------------------------------------------------------------------------------
50    Po50(SU)    Eth      LACP      Eth2/26(P)
100   Po100(SU)   Eth      LACP      Eth2/9(P)    Eth2/10(P)
1000  Po1000(SU)  Eth      LACP      Eth2/1(P)    Eth4/1(P)
CORE2-F11# show run int eth 2/26

!Command: show running-config interface Ethernet2/26


version 4.2(1)

interface Ethernet2/26
  description Connection to Catalyst 6500 te5/1 (for Spirent Connectivity)
  switchport
  switchport mode trunk
  switchport trunk allowed vlan 1,100
  rate-mode dedicated force
  channel-group 50 mode active
  no shutdown

CORE2-F11# show run int eth 2/9

!Command: show running-config interface Ethernet2/9


version 4.2(1)

interface Ethernet2/9
  description Connection to AGG1 eth 2/18
  switchport
  switchport mode trunk
  switchport trunk allowed vlan 1,100
  rate-mode dedicated force
  channel-group 100 mode active
  no shutdown

CORE2-F11# show run int eth 2/10

!Command: show running-config interface Ethernet2/10


version 4.2(1)

interface Ethernet2/10
  description Connection to AGG2 eth 2/18
  switchport
  switchport mode trunk
  switchport trunk allowed vlan 1,100
  rate-mode dedicated force
  channel-group 100 mode active
  no shutdown

CORE2-F11# show run int eth 2/1

!Command: show running-config interface Ethernet2/1


version 4.2(1)

interface Ethernet2/1
  description vPC Peerlink Member Port #1 (por 1000)
  switchport
  switchport mode trunk
  switchport trunk allowed vlan 1,100
  rate-mode dedicated force
  udld aggressive
  channel-group 1000 mode active
  no shutdown

CORE2-F11# show run int eth 4/1

!Command: show running-config interface Ethernet4/1


version 4.2(1)

interface Ethernet4/1
  description vPC Peerlink Member Port #2 (por 1000)
  switchport
  switchport mode trunk
  switchport trunk allowed vlan 1,100
  rate-mode dedicated force
  udld aggressive
  channel-group 1000 mode active
  no shutdown

CORE2-F11# show run int vlan 100

!Command: show running-config interface Vlan100

version 4.2(1)

interface Vlan100
  no shutdown
  description Server Subnet - Vlan 100
  ip address 100.100.11.2/24
  ip router ospf 100 area 0.0.0.0
  hsrp 100
    preempt delay minimum 15
    timers  1  3
    ip 100.100.11.254

Configuration of AGG1

AGG1-F12# show run vpc

!Command: show running-config vpc


version 4.2(1)
feature vpc

vpc domain 2
  role priority 1
  peer-keepalive destination 111.211.1.2 source 111.211.1.1 vrf peerkeepalive


interface port-channel10
  vpc 10

interface port-channel20
  vpc 20

interface port-channel100
  vpc 100

interface port-channel200
  vpc 200

interface port-channel300
  vpc 300

interface port-channel600
  vpc 600

interface port-channel3000
  vpc peer-link

AGG1-F12# show run int port-channel 10

!Command: show running-config interface port-channel10


version 4.2(1)

interface port-channel10
  description Port Channel to ACC3 Nexus 5K
  switchport
  switchport mode trunk
  vpc 10
  switchport trunk allowed vlan 1,100,200

AGG1-F12# show run int port-channel 20

!Command: show running-config interface port-channel20


version 4.2(1)

interface port-channel20
  description Port Channel to ACC4 Nexus 5K
  switchport
  switchport mode trunk
  vpc 20
  switchport trunk allowed vlan 1,100,200

AGG1-F12# show run int port-channel 100

!Command: show running-config interface port-channel100

version 4.2(1)

interface port-channel100
  description Port Channel to Core Layer - VDC1
  switchport
  switchport mode trunk
  vpc 100
  switchport trunk allowed vlan 1,100

AGG1-F12# show run int port-channel 200

!Command: show running-config interface port-channel200


version 4.2(1)

interface port-channel200
  description Port Channel to Core Layer - VDC2
  switchport
  switchport mode trunk
  switchport trunk allowed vlan 1,200
  vpc 200

AGG1-F12# show run int port-channel 300

!Command: show running-config interface port-channel300


version 4.2(1)

interface port-channel300
  description Port Channel to Access Layer
  switchport
  switchport mode trunk
  switchport trunk allowed vlan 1,100,200
  vpc 300

AGG1-F12# show run int port-channel 600

!Command: show running-config interface port-channel600


version 4.2(1)

interface port-channel600
  description Port Channel to SVR-WIN TEAM2 (100.100.11.201)
  switchport
  vpc 600
  switchport access vlan 100

AGG1-F12# show run int port-channel 3000

!Command: show running-config interface port-channel3000


version 4.2(1)

interface port-channel3000
  description vPC Peerlink
  switchport
  switchport mode trunk
  vpc peer-link
  switchport trunk allowed vlan 1,100,200
  spanning-tree port type network

AGG1-F12# show port-channel summary
Flags:  D - Down        P - Up in port-channel (members)
        I - Individual  H - Hot-standby (LACP only)
        s - Suspended   r - Module-removed
        S - Switched    R - Routed
        U - Up (port-channel)
--------------------------------------------------------------------------------
Group Port-       Type     Protocol  Member Ports
      Channel
--------------------------------------------------------------------------------
10    Po10(SU)    Eth      LACP      Eth3/1(P)
20    Po20(SU)    Eth      LACP      Eth3/2(P)
100   Po100(SU)   Eth      LACP      Eth2/17(P)   Eth2/18(P)
200   Po200(SU)   Eth      LACP      Eth2/25(P)   Eth2/26(P)
300   Po300(SU)   Eth      LACP      Eth3/9(P)    Eth3/10(P)
600   Po600(SU)   Eth      NONE      Eth3/17(P)
3000  Po3000(SU)  Eth      LACP      Eth2/1(P)    Eth2/2(P)    Eth3/25(P)
                                     Eth3/26(P)
AGG1-F12# show run int eth 3/1

!Command: show running-config interface Ethernet3/1


version 4.2(1)

interface Ethernet3/1
  description Member Port #1 for Port-Channel 10 (N5K ACC3)
  switchport
  switchport mode trunk
  switchport trunk allowed vlan 1,100,200
  rate-mode dedicated force
  channel-group 10 mode active
  no shutdown

AGG1-F12# show run int eth 2/1

!Command: show running-config interface Ethernet2/1


version 4.2(1)

interface Ethernet2/1
  description Member port for Peerlink #1
  switchport
  switchport mode trunk
  switchport trunk allowed vlan 1,100,200
  rate-mode dedicated force
  channel-group 3000 mode active
  no shutdown

AGG1-F12# show vpc brief
Legend:
                (*) - local vPC is down, forwarding via vPC peer-link

vPC domain id                   : 2
Peer status                     : peer adjacency formed ok
vPC keep-alive status           : peer is alive
Configuration consistency status: success
vPC role                        : primary
Number of vPCs configured       : 6
Peer Gateway                    : Disabled
Dual-active excluded VLANs      : -

vPC Peer-link status
---------------------------------------------------------------------
id   Port   Status Active vlans
--   ----   ------ --------------------------------------------------
1    Po3000 up     1,100,200

vPC status
----------------------------------------------------------------------
id   Port   Status Consistency Reason                     Active vlans
--   ----   ------ ----------- -------------------------- ------------
10   Po10   up     success     success                    1,100,200
20   Po20   up     success     success                    1,100,200
100  Po100  up     success     success                    1,100
200  Po200  up     success     success                    1,200
300  Po300  up     success     success                    1,100,200
600  Po600  up     success     success                    100

Configuration of AGG2:

AGG2-F13# show run vpc

!Command: show running-config vpc


version 4.2(1)
feature vpc

vpc domain 2
  peer-keepalive destination 111.211.1.1 source 111.211.1.2 vrf peerkeepalive


interface port-channel10
  vpc 10

interface port-channel20
  vpc 20

interface port-channel100
  vpc 100

interface port-channel200
  vpc 200

interface port-channel300
  vpc 300

interface port-channel600
  vpc 600

interface port-channel3000
  vpc peer-link

AGG2-F13# show run int port-channel 10

!Command: show running-config interface port-channel10


version 4.2(1)

interface port-channel10
  description Port Channel to ACC3 (N5K)
  switchport
  switchport mode trunk
  vpc 10
  switchport trunk allowed vlan 1,100,200

AGG2-F13# show run int port-channel 20

!Command: show running-config interface port-channel20


version 4.2(1)

interface port-channel20
  description Port Channel to ACC4 (N5K)
  switchport
  switchport mode trunk
  vpc 20
  switchport trunk allowed vlan 1,100,200

AGG2-F13# show run int port-channel 100

!Command: show running-config interface port-channel100


version 4.2(1)

interface port-channel100
  description Port Channel to Core Layer VDC1
  switchport
  switchport mode trunk
  vpc 100
  switchport trunk allowed vlan 1,100,200

AGG2-F13# show run int port-channel 200

!Command: show running-config interface port-channel200


version 4.2(1)

interface port-channel200
  description Port Channel to Core Layer VDC2
  switchport
  switchport mode trunk
  vpc 200
  switchport trunk allowed vlan 1,100,200

AGG2-F13# show run int port-channel 300

!Command: show running-config interface port-channel300


version 4.2(1)

interface port-channel300
  description Port Channel to Access Layer N7Ks
  switchport
  switchport mode trunk
  vpc 300
  switchport trunk allowed vlan 1,100,200

AGG2-F13# show run int port-channel 600

!Command: show running-config interface port-channel600


version 4.2(1)

interface port-channel600
  description Port Channel to SVR-WIN TEAM2 (100.100.11.201)
  switchport
  vpc 600
  switchport access vlan 100

AGG2-F13# show run int port-channel 3000

!Command: show running-config interface port-channel3000


version 4.2(1)

interface port-channel3000
  description vPC Peerlink
  switchport
  switchport mode trunk
  switchport trunk allowed vlan 1,100,200
  vpc peer-link
  spanning-tree port type network

AGG2-F13# show port-channel summary
Flags:  D - Down        P - Up in port-channel (members)
        I - Individual  H - Hot-standby (LACP only)
        s - Suspended   r - Module-removed
        S - Switched    R - Routed
        U - Up (port-channel)
--------------------------------------------------------------------------------
Group Port-       Type     Protocol  Member Ports
      Channel
--------------------------------------------------------------------------------
10    Po10(SU)    Eth      LACP      Eth3/1(P)
20    Po20(SU)    Eth      LACP      Eth3/2(P)
100   Po100(SU)   Eth      LACP      Eth2/17(P)   Eth2/18(P)
200   Po200(SU)   Eth      LACP      Eth2/25(P)   Eth2/26(P)
300   Po300(SU)   Eth      LACP      Eth3/9(P)    Eth3/10(P)
600   Po600(SU)   Eth      NONE      Eth3/17(P)
1000  Po1000(SD)  Eth      NONE      --
3000  Po3000(SU)  Eth      LACP      Eth2/1(P)    Eth2/2(P)    Eth2/9(P)
                                     Eth2/10(P)
AGG2-F13# show run int eth 3/1

!Command: show running-config interface Ethernet3/1


version 4.2(1)

interface Ethernet3/1
  description Member Port #1 for Port-Channel 10 (N5K ACC3)
  switchport
  switchport mode trunk
  switchport trunk allowed vlan 1,100,200
  rate-mode dedicated force
  channel-group 10 mode active
  no shutdown

AGG2-F13# show run int eth 2/1

!Command: show running-config interface Ethernet2/1


version 4.2(1)

interface Ethernet2/1
  description Peer keep-alive Member Port #1
  switchport
  switchport mode trunk
  switchport trunk allowed vlan 1,100,200
  rate-mode dedicated force
  channel-group 3000 mode active
  no shutdown

AGG2-F13# show vpc brief
Legend:
                (*) - local vPC is down, forwarding via vPC peer-link

vPC domain id                   : 2
Peer status                     : peer adjacency formed ok
vPC keep-alive status           : peer is alive
Configuration consistency status: success
vPC role                        : secondary
Number of vPCs configured       : 6
Peer Gateway                    : Disabled
Dual-active excluded VLANs      : -

vPC Peer-link status
---------------------------------------------------------------------
id   Port   Status Active vlans
--   ----   ------ --------------------------------------------------
1    Po3000 up     1,100,200

vPC status
----------------------------------------------------------------------
id   Port   Status Consistency Reason                     Active vlans
--   ----   ------ ----------- -------------------------- ------------
10   Po10   up     success     success                    1,100,200
20   Po20   up     success     success                    1,100,200
100  Po100  up     success     success                    1,100
200  Po200  up     success     success                    1,200
300  Po300  up     success     success                    1,100,200
600  Po600  up     success     success                    100

AGG2-F13#

Configuration of ACC1:

ACC1-I13# show run vpc

!Command: show running-config vpc


version 4.2(1)
feature vpc

vpc domain 1
  role priority 1
  peer-keepalive destination 112.212.1.2 source 112.212.1.1 vrf peerkeepalive


interface port-channel300
  vpc 300

interface port-channel500
  vpc 500

interface port-channel4000
  vpc peer-link

ACC1-I13# show run int port-channel 300

!Command: show running-config interface port-channel300


version 4.2(1)

interface port-channel300
  description Port Channel to AGG Layer N7Ks
  switchport
  switchport mode trunk
  switchport trunk allowed vlan 1,100,200
  vpc 300

ACC1-I13# show run int port-channel 500

!Command: show running-config interface port-channel500


version 4.2(1)

interface port-channel500
  description Port Channel to SVR-WIN (vPC 500)
  switchport
  vpc 500
  switchport access vlan 100

ACC1-I13# show run int port-channel 4000

!Command: show running-config interface port-channel4000


version 4.2(1)

interface port-channel4000
  description Peerlink Port Channel (eth2/1 - eth2/2)
  switchport
  switchport mode trunk
  vpc peer-link
  switchport trunk allowed vlan 1,100,200
  spanning-tree port type network

ACC1-I13# show port-channel summary
Flags:  D - Down        P - Up in port-channel (members)
        I - Individual  H - Hot-standby (LACP only)
        s - Suspended   r - Module-removed
        S - Switched    R - Routed
        U - Up (port-channel)
--------------------------------------------------------------------------------
Group Port-       Type     Protocol  Member Ports
      Channel
--------------------------------------------------------------------------------
300   Po300(SU)   Eth      LACP      Eth2/9(P)    Eth2/10(P)
500   Po500(SU)   Eth      NONE      Eth2/17(P)
4000  Po4000(SU)  Eth      LACP      Eth2/1(P)    Eth2/2(P)
ACC1-I13# show run int eth 2/9

!Command: show running-config interface Ethernet2/9


version 4.2(1)

interface Ethernet2/9
  description Member Port #1 - vPC 300 to AGG Layer
  switchport
  switchport mode trunk
  switchport trunk allowed vlan 1,100,200
  rate-mode dedicated force
  channel-group 300 mode active
  no shutdown

ACC1-I13# show run int eth 2/17

!Command: show running-config interface Ethernet2/17


version 4.2(1)

interface Ethernet2/17
  description Connects to SVR-WIN TEAM1 (100.100.11.202)
  switchport
  switchport access vlan 100
  rate-mode dedicated force
  channel-group 500
  no shutdown

ACC1-I13# show run int eth 2/1

!Command: show running-config interface Ethernet2/1


version 4.2(1)

interface Ethernet2/1
  description Peerlink Member Port #1
  switchport
  switchport mode trunk
  switchport trunk allowed vlan 1,100,200
  rate-mode dedicated force
  channel-group 4000 mode active
  no shutdown

ACC1-I13# show vpc brief
Legend:
                (*) - local vPC is down, forwarding via vPC peer-link

vPC domain id                   : 1
Peer status                     : peer adjacency formed ok
vPC keep-alive status           : peer is alive
Configuration consistency status: success
vPC role                        : primary
Number of vPCs configured       : 2
Peer Gateway                    : Disabled
Dual-active excluded VLANs      : -

vPC Peer-link status
---------------------------------------------------------------------
id   Port   Status Active vlans
--   ----   ------ --------------------------------------------------
1    Po4000 up     1,100,200

vPC status
----------------------------------------------------------------------
id   Port   Status Consistency Reason                     Active vlans
--   ----   ------ ----------- -------------------------- ------------
300  Po300  up     success     success                    1,100,200
500  Po500  up     success     success                    100

Configuration of ACC2:

ACC2-I12# show run vpc

!Command: show running-config vpc


version 4.2(1)
feature vpc

vpc domain 1
  peer-keepalive destination 112.212.1.1 source 112.212.1.2 vrf peerkeepalive


interface port-channel300
  vpc 300

interface port-channel500
  vpc 500

interface port-channel4000
  vpc peer-link

ACC2-I12# show run int port-channel 300

!Command: show running-config interface port-channel300


version 4.2(1)

interface port-channel300
  description vPC to AGG Layer N7Ks
  switchport
  switchport mode trunk
  vpc 300
  switchport trunk allowed vlan 1,100,200

ACC2-I12# show run int port-channel 500

!Command: show running-config interface port-channel500


version 4.2(1)

interface port-channel500
  description Port Channel to SVR-WIN TEAM1 (eth 2/17)
  switchport
  vpc 500
  switchport access vlan 100

ACC2-I12# show run int port-channel 4000

!Command: show running-config interface port-channel4000


version 4.2(1)

interface port-channel4000
  description vPC Peerlink (eth 2/1 - eth 2/2)
  switchport
  switchport mode trunk
  vpc peer-link
  switchport trunk allowed vlan 1,100,200
  spanning-tree port type network

ACC2-I12# show port-channel summary
Flags:  D - Down        P - Up in port-channel (members)
        I - Individual  H - Hot-standby (LACP only)
        s - Suspended   r - Module-removed
        S - Switched    R - Routed
        U - Up (port-channel)
--------------------------------------------------------------------------------
Group Port-       Type     Protocol  Member Ports
      Channel
--------------------------------------------------------------------------------
300   Po300(SU)   Eth      LACP      Eth2/9(P)    Eth2/10(P)
500   Po500(SU)   Eth      NONE      Eth2/17(P)
4000  Po4000(SU)  Eth      LACP      Eth2/1(P)    Eth2/2(P)
ACC2-I12# show run int eth 2/9

!Command: show running-config interface Ethernet2/9


version 4.2(1)

interface Ethernet2/9
  switchport
  switchport mode trunk
  switchport trunk allowed vlan 1,100,200
  rate-mode dedicated force
  channel-group 300 mode active
  no shutdown

ACC2-I12# show run int eth 2/17

!Command: show running-config interface Ethernet2/17


version 4.2(1)

interface Ethernet2/17
  switchport
  switchport access vlan 100
  rate-mode dedicated force
  channel-group 500
  no shutdown

ACC2-I12# show run int eth 2/1

!Command: show running-config interface Ethernet2/1


version 4.2(1)

interface Ethernet2/1
  description Peerlink Member Port #1
  switchport
  switchport mode trunk
  switchport trunk allowed vlan 1,100,200
  rate-mode dedicated force
  channel-group 4000 mode active
  no shutdown

ACC2-I12# show vpc brief
Legend:
                (*) - local vPC is down, forwarding via vPC peer-link

vPC domain id                   : 1
Peer status                     : peer adjacency formed ok
vPC keep-alive status           : peer is alive
Configuration consistency status: success
vPC role                        : secondary
Number of vPCs configured       : 2
Peer Gateway                    : Disabled
Dual-active excluded VLANs      : -

vPC Peer-link status
---------------------------------------------------------------------
id   Port   Status Active vlans
--   ----   ------ --------------------------------------------------
1    Po4000 up     1,100,200

vPC status
----------------------------------------------------------------------
id   Port   Status Consistency Reason                     Active vlans
--   ----   ------ ----------- -------------------------- ------------
300  Po300  up     success     success                    1,100,200
500  Po500  up     success     success                    100

Configuration of ACC3:

n5k-F10# show port-channel summary
Flags:  D - Down        P - Up in port-channel (members)
        I - Individual  H - Hot-standby (LACP only)
        s - Suspended   r - Module-removed
        S - Switched    R - Routed
        U - Up (port-channel)
--------------------------------------------------------------------------------
Group Port-       Type     Protocol  Member Ports
      Channel
--------------------------------------------------------------------------------
10    Po10(SU)    Eth      LACP      Eth1/1(P)    Eth1/2(P)
n5k-F10# show run int port-channel 10
version 4.0(1a)N2(1a)

interface port-channel10
  switchport mode trunk
  switchport trunk allowed vlan 1,100,200

n5k-F10# show run int eth 1/1
version 4.0(1a)N2(1a)

interface Ethernet1/1
  switchport mode trunk
  switchport trunk allowed vlan 1,100,200
  channel-group 10 mode active

n5k-F10# show run int eth 1/2
version 4.0(1a)N2(1a)

interface Ethernet1/2
  switchport mode trunk
  switchport trunk allowed vlan 1,100,200
  channel-group 10 mode active

n5k-F10# show run int eth 1/7
version 4.0(1a)N2(1a)

interface Ethernet1/7
  spanning-tree port type edge
  switchport access vlan 100

Configuration of ACC4:

n5k-F11# show port-channel summary
Flags:  D - Down        P - Up in port-channel (members)
        I - Individual  H - Hot-standby (LACP only)
        s - Suspended   r - Module-removed
        S - Switched    R - Routed
        U - Up (port-channel)
--------------------------------------------------------------------------------
Group Port-       Type     Protocol  Member Ports
      Channel
--------------------------------------------------------------------------------
20    Po20(SU)    Eth      LACP      Eth1/1(P)    Eth1/2(P)
n5k-F11# show run int eth 1/1
version 4.0(1a)N2(1a)

interface Ethernet1/1
  switchport mode trunk
  switchport trunk allowed vlan 1,100,200
  channel-group 20 mode active

n5k-F11# show run int eth 1/2
version 4.0(1a)N2(1a)

interface Ethernet1/2
  switchport mode trunk
  switchport trunk allowed vlan 1,100,200
  channel-group 20 mode active

n5k-F11# show run int port-channel 20
version 4.0(1a)N2(1a)

interface port-channel20
  switchport mode trunk
  switchport trunk allowed vlan 1,100,200

Related Information

Technical Support & Documentation - Cisco Systems


Rating: 0.0/5 (0 votes cast)

Personal tools