DBAccessor errors while CVD start up

From DocWiki

(Difference between revisions)
Jump to: navigation, search
(New page: == DBAccessor errors while CVD start up == {| border="1" |- ! '''Problem Summary''' | DBAccessor errors while CVD start up DBException: WaitUntilDBAccessor Initialized |- ! '''Error Mes...)
 
Line 14: Line 14:
|-
|-
! '''Possible Cause'''
! '''Possible Cause'''
-
| The datastore is not activated.
+
| Datastores are is not activated.
|-
|-
! '''Recommended Action'''
! '''Recommended Action'''
-
| Please check that the datastore is activated/enabled in the Component Config object from CET and serviceability tool. If not activate/enable it.
+
| Please check that all the datastores are activated/enabled in the Component Config object from CET and serviceability tool. If not activate/enable it.
|-
|-
! '''Release'''
! '''Release'''

Latest revision as of 07:01, 4 May 2010

DBAccessor errors while CVD start up

Problem Summary DBAccessor errors while CVD start up

DBException: WaitUntilDBAccessor Initialized


Error Message DBException: WaitUntilDBAccessor Initialized in MCVD log.
Possible Cause Datastores are is not activated.
Recommended Action Please check that all the datastores are activated/enabled in the Component Config object from CET and serviceability tool. If not activate/enable it.
Release Release 7.0, Release 5.0
Associated CDETS # None

Rating: 0.0/5 (0 votes cast)

Retrieved from "http://docwiki.cisco.com/wiki/DBAccessor_errors_while_CVD_start_up"
Personal tools