Configuration for Fax Pass through

From DocWiki

Revision as of 17:24, 23 June 2010 by Jkratky (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search



The following details should give you a small configuration example on how to configure Fax passthrough for an MGCP gateway which is controlled by the Call Manager.


PSTN-----T1 PRI-----MGCP gateway------CM------mgcp VG224----Fax machine


voice service voip 
fax protocol none
ccm-manager mgcp
no ccm-manager fax protocol cisco
mgcp call-agent service-type mgcp version 0.1
mgcp modem passthrough voip mode nse
mgcp package-capability rtp-package
mgcp fax t38 inhibit

Related show Commands

show mgcp displays MGCP configuration show ccm-manager displays if the gateway is registered with the call manager or not

Rating: 4.0/5 (2 votes cast)

Personal tools