Configuration for Fax Pass through

From DocWiki

Revision as of 15:00, 23 June 2010 by Jkratky (Talk | contribs)
Jump to: navigation, search



The following details should give you a small configuration example on how to configure Fax passthrough for an MGCP gateway which is controlled by the Call Manager.


PSTN-----T1 PRI-----MGCP gateway------CM------mgcp VG224----Fax machine


voice service voip fax protocol none ! ccm-manager mgcp no ccm-manager fax protocol cisco ! mgcp mgcp call-agent service-type mgcp version 0.1 mgcp modem passthrough voip mode nse mgcp package-capability rtp-package mgcp fax t38 inhibit

Related show Commands

show mgcp displays MGCP configuration show ccm-manager displays if the gateway is registered with the call manager or not

Rating: 4.0/5 (2 votes cast)

Personal tools