Configuration for Fax Pass through
From DocWiki
(Difference between revisions)
(New page: {{Template:Required Metadata}} ==Introduction== The following details should give you a small configuration example on how to configure Fax passthrough for an MGCP gateway which is contr...) |
|||
| Line 26: | Line 26: | ||
show mgcp displays MGCP configuration | show mgcp displays MGCP configuration | ||
show ccm-manager displays if the gateway is registered with the call manager or not | show ccm-manager displays if the gateway is registered with the call manager or not | ||
| + | [[Category:Configuration Examples]] | ||
Revision as of 15:00, 23 June 2010
Contents |
Introduction
The following details should give you a small configuration example on how to configure Fax passthrough for an MGCP gateway which is controlled by the Call Manager.
Design
PSTN-----T1 PRI-----MGCP gateway------CM------mgcp VG224----Fax machine
Configuration
voice service voip fax protocol none ! ccm-manager mgcp no ccm-manager fax protocol cisco ! mgcp mgcp call-agent 10.3.222.1 service-type mgcp version 0.1 mgcp modem passthrough voip mode nse mgcp package-capability rtp-package mgcp fax t38 inhibit
Related show Commands
show mgcp displays MGCP configuration show ccm-manager displays if the gateway is registered with the call manager or not
