Cisco Unified Presence, Release 7.x -- How to View the Status of Components in the Cisco Unified Operating System

From DocWiki

Revision as of 17:40, 21 December 2009 by Sicoughl (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Main page: Cisco Unified Presence, Release 7.x

Contents

Previous Topic



Viewing Cluster Nodes Status

Procedure
  1. Log in to Cisco Unified Operating System Administration.
  2. Select Show > Cluster.
  3. Review the fields in the Cluster window.


Table: Table 1 Cluster Nodes Field Descriptions
Field Description

Hostname

The complete hostname of the server.

IP Address

The IP address of the server.

Alias

The alias name of the server, when defined.

Type of Node

Indicates whether the server is a publisher node or a subscriber node.

Related Topics


Viewing Hardware Status

Procedure
  1. Log in to Cisco Unified Operating System Administration.
  2. Select Show > Hardware.
  3. Review the fields in the Hardware Status window, as described in the table below.
Table: Hardware Status Field Descriptions
Field Description

Platform Type

The model identity of the platform server.

Processor Speed

Processor speed (measured in MHz) in the platform server.

CPU Type

The type of processor in the platform server.

Memory

The total amount of memory in MBytes.

Object ID

Used by SNMP to identify an object.

OS Version

The version of the platform operating system.

RAID Details

Status of the RAID controller and logical drive if the machine is RAID enabled.

Related Topics


Viewing Network Status

Before You Begin

The network status information that displays depends on whether Network Fault Tolerance is enabled. When Network Fault Tolerance is enabled, Ethernet port 1 automatically takes over network communications if Ethernet port 0 fails. If Network Fault Tolerance is enabled, network status information displays for the network ports Ethernet 0, Ethernet 1, and Bond 0. If Network Fault Tolerance is not enabled, status information displays only for Ethernet 0.


Procedure
  1. Log in to Cisco Unified Operating System Administration.
  2. Select Show > Network.
  3. Review the fields in the Network Configuration window, as described in the table below.
Table: Network Settings Field Descriptions
Field Description

DHCP

Indicates whether DHCP is enabled for Ethernet port 0.

Status

Indicates whether the port is Up or Down for Ethernet ports 0 and 1.

IP Address

The IP address of Ethernet port 0 (and Ethernet port 1 if Network Fault Tolerance (NFT) is enabled).

IP Mask

The IP mask of Ethernet port 0 (and Ethernet port 1 if NFT is enabled).

Link Detected

Indicates whether an active link exists.

Queue Length

The length of the queue.

MTU

The maximum transmission unit.

MAC Address

The hardware address of the port.

Receive Statistics

Information about received bytes and packets.

Transmit Statistics

Information about transmitted bytes and packets.

Primary DNS

The IP address of the primary domain name server.

Secondary DNS

The IP address of the secondary domain name server.

Domain

The domain of the server.

Gateway

The IP address of the network gateway on Ethernet port 0.

Related Topics


Viewing Installed Software

You can view the software versions and installed software options.


Procedure
  1. Log in to Cisco Unified Operating System Administration.
  2. Select Show > Software.
  3. Review the fields in the Software Packages windows described in the table below.


Table: Software Packages Field Descriptions
Field Description

Partition Versions

The software version that is running on the active and inactive partitions.

Active Version Installed Software Options

The versions of installed software options, including locales and dial plans, that are installed on the active version.

Inactive Version Installed Software Options

The versions of installed software options, including locales and dial plans, that are installed on the inactive version.

Related Topics


Viewing System Status

Procedure
  1. Log in to Cisco Unified Operating System Administration.
  2. Select Show > System.
  3. Review the fields in the System Status window, as described in the table below.
Table: Table 5 Platform Status Field Descriptions
Field Description

Host Name

The name of the Cisco MCS host where Cisco Unified Operating System is installed.

Date/Time

The date and time based on the continent and region that were specified during operating system installation.

Time Zone

The time zone that was chosen during installation.

Locale

The language that was chosen during operating system installation.

Product Version

The operating system version.

Platform Version

The platform version.

Related Topics


Viewing IP Preferences

Procedure

1. Log in to Cisco Unified Operating System Administration.

2. Select Show >IP Preferences.

3. To filter or search records, perform one of the following actions:

  • From the first list box, select a search parameter.
  • From the second list box, select a search pattern.
  • Specify the appropriate search text, if applicable.

4. Click Find.

5. Review the fields in the System Status window.

Table: IP Preference Field Descriptions
Field Description

Application

The name of the application.

Protocol

The type of protocol that this application will use, for example, TCP or UDP.

Port Number

The port number that is configured for this application.

Type

The type of transport that this application will use:

  • Public
  • Private
  • Translated

Translated Port

The translated port number that is configured for this application.

Status

Indicates whether the application is enabled or disabled.

Description

The description of the application.

Related Topics

Rating: 0.0/5 (0 votes cast)

Personal tools