Cisco Unified MeetingPlace Release 8.6 -- Compatibility Matrix

From DocWiki

(Difference between revisions)
Jump to: navigation, search
m (1 revision)
(3 intermediate revisions not shown)
Line 167: Line 167:
|-
|-
! Cisco Unified Communications Manager Version  
! Cisco Unified Communications Manager Version  
-
! Supported with Cisco Unified MeetingPlace Release 8.5.2
+
! Supported with Cisco Unified MeetingPlace Release 8.6
! SIP Trunk Calls/Second  
! SIP Trunk Calls/Second  
! Number of Audio/Video Server Nodes Supported  
! Number of Audio/Video Server Nodes Supported  
Line 409: Line 409:
Following are the test results for video endpoint compatibility when using Cisco Unified MeetingPlace Release 8.6 with a Hardware Media Server (HMS).  
Following are the test results for video endpoint compatibility when using Cisco Unified MeetingPlace Release 8.6 with a Hardware Media Server (HMS).  
-
For a complete list of supported endpoints, refer to http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.5_--_Compatibility_Matrix .   
+
For a complete list of supported endpoints, refer to http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.6_--_Compatibility_Matrix .   
'''Notes: '''  
'''Notes: '''  
Line 1,245: Line 1,245:
|}
|}
-
<br> (1) HR - High Rate, SR - Standard Rate, see http://docwiki-dev.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.6_--_Compatibility_Matrix#Video_Format_Support_for_Release_8.6.  
+
<br> (1) HR - High Rate, SR - Standard Rate, see http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.6_--_Compatibility_Matrix#Video_Format_Support_for_Release_8.6.
=== &nbsp;Release 8.6 Compatibility Test Results with the Express Media Server  ===
=== &nbsp;Release 8.6 Compatibility Test Results with the Express Media Server  ===
Line 1,251: Line 1,251:
Following are the test results for video endpoint compatibility when using Cisco Unified MeetingPlace Release 8.6 with an Express Media Server (EMS).  
Following are the test results for video endpoint compatibility when using Cisco Unified MeetingPlace Release 8.6 with an Express Media Server (EMS).  
-
<br>For a complete list of supported endpoints, refer to http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.5_--_Compatibility_Matrix .  
+
<br>For a complete list of supported endpoints, refer to http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.6_--_Compatibility_Matrix .  
<br>  
<br>  

Revision as of 14:59, 6 May 2014

Main page: Cisco Unified MeetingPlace Release 8.6

Print PDF: Cisco Unified MeetingPlace Release 8.6 -- Print Compatibility Matrix


This document provides information for Cisco Unified MeetingPlace Release 8.6.


Note: Cisco Unified MeetingPlace Release 8.6 is not backwards compatible. All major components, such as the Application Server/Express Media Server, Hardware Media Server, Web Server, must be at Release 8.6.


Contents

Component Compatibility for Release 8.6

Note: For compatibility information for other Cisco Unified MeetingPlace releases, go to http://www.cisco.com/en/US/products/sw/ps5664/ps5669/products_device_support_tables_list.html.


The following table lists the components (and their release numbers) that are compatible with the Cisco Unified MeetingPlace Application Server Release 8.6.


Application Server Version Component Name Component Version Component Release Date
8.6.1.2

Released October 30, 2013

Note: The Express Media Server and Meeting Director are included with the Application Server and are therefore on the same version.

Audio Blade

6.5.0.8.0

October 30, 2013

Video Blade

5.3.3.0.54A

Mar. 26, 2010

Cisco WebEx Node for MCS

8.5.5.10

May 08, 2013

Web Server software

8.6.1.2

October 30, 2013

Web Server Operating System

One of the following versions of the Cisco Unified MeetingPlace Windows OS depending on your Cisco platform:

  • 5.0.0.3 (MPWinOS_I3_5003.iso)
  • 4.1.0.3 (MPWinOS_I2_4103.iso)
  • 4.1.0.2 (MPWinOS_H2_4102.iso)
  • 1.0.0.3 (MPWinOS_VM_1003.iso)


Notes:

  • The Cisco Unified MeetingPlace Windows OS depends on the version of your Cisco hardware. For more information, see Operating System.
  • Release 8.6 supports the Cisco-provided operating system only.

May 31, 2011

Notes:

  • MPWinOS_I3_5003.iso was released July 1, 2011.
  • MPWinOS_VM_1003.iso was released July 12, 2011.

Cisco Unified Communications Manager (CUCM)

  • CUCM 6.1(5), 7.0(2), 7.1(5), 8.0(1), 8.0(2), 8.0(3), 8.5(1), 8.6(1), 8.6(2), 9.0(1), 9.1(2), 10.0(1)
  • CUCM-SME 7.1(3), 8.0, 8.5


Notes:

  • MeetingPlace with sRTP enabled requires UC Manager 7.0 and above to support sRTP.
  • CUCM 8.0(3) supports SIP Refers for multinode Cisco Unified MeetingPlace systems. Open a case with Cisco TAC against the Cisco Unified Communications Manager to obtain the latest Engineering Special (ES) or Service Update (SU) version of CUCM 8.0(3).
  • Ad-hoc (SCCP) meetings are not supported with CUCM 8.5 (and above) per known bug issue on UC Manager.
  • For more information, see Cisco Unified Communications Manager Compatibility for Release 8.6

Nov. 12, 2007 - 2013


Cisco Unified Operations Manager

8.6

August 2011


Cisco WebEx Business Suite (WBS)

WBS27 SP27 or later


Note: If your site is on a version earlier than WBS27 SP27, contact your Cisco WebEx Customer Support Engineer (CSE) to request an upgrade to the minimum version required for use with Cisco Unified MeetingPlace Release 8.6.

June 4, 2011

Cisco Unified MeetingPlace for Microsoft Outlook

8.6.1.2

October 30, 2013

Cisco Unified MeetingPlace for IBM Lotus Notes

8.6.1.2

October 30, 2013

Cisco Unified Communications Manager Compatibility for Release 8.6

Cisco Unified Communications Manager Version Supported with Cisco Unified MeetingPlace Release 8.6 SIP Trunk Calls/Second Number of Audio/Video Server Nodes Supported Notes

6.1(5)

Y

<17

1 node deployment only

Not supported in WebEx-scheduling deployments

7.0(2)

Y

17.77

4 node deployment (requires WebEx front-end)

Lower scaleability with multinode, max of 8cps + 75% refers with 4 nodes, brings down ports per node to 800

7.1(5)

Y

18.52

4 node deployment (requires WebEx front-end)

Lower scaleability with multinode, max of 8cps + 75% refers with 4 nodes, brings down ports per node to 800

8.0(1)

Y

24.69

1 node deployment only

Not supported in WebEx-scheduling deployments

8.0(2)

Y

24.69

1 node deployment only

Not supported in WebEx-scheduling deployments

8.0(3)

Y

8

4 server deployment (requires WebEx front-end)

Supports 1000 ports per node. Verified 8cps incoming call rate with 75% call refer rate.

CUCM 8.0(3) supports SIP Refers for multinode Cisco Unified MeetingPlace systems. You must open a case with Cisco TAC against Cisco Unified Communications Manager to obtain the latest Engineering Special (ES) or Service Update (SU) version of CUCM 8.0(3).

8.5(1)

Y

36

16 server deployment (requires WebEx front-end)

Supports 1200 ports per node

Total number of nodes includes 12 Conferencing nodes, two additional Conferencing nodes for resiliency, and two Meeting Directors

Not supported for ad-hoc meetings

8.5(2)

Y

36

16 server deployment (requires WebEx front-end)

Supports 1200 ports per node

Total number of nodes includes 12 Conferencing nodes, two additional Conferencing nodes for resiliency, and two Meeting Directors

8.6(1)  Y


36

 16 server  deployment(requires WebEx front-end)

 Supports 1200 ports per node

Total number of nodes includes 12 Conferencing nodes, two additional Conferencing nodes for resiliency, and two Meeting Directors

9.0(1)  Y


36

 16 server deployment (requires WebEx front-end)

 Supports 1200 ports per node

Total number of nodes includes 12 Conferencing nodes, two additional Conferencing nodes for resiliency, and two Meeting Directors

9.1(2)  Y


36

 16 server deployment (requires WebEx front-end)

 Supports 1200 ports per node

Total number of nodes includes 12 Conferencing nodes, two additional Conferencing nodes for resiliency, and two Meeting Directors

10.0(1)  Y


36

 16 server deployment (requires WebEx front-end)

 Supports 1200 ports per node

Total number of nodes includes 12 Conferencing nodes, two additional Conferencing nodes for resiliency, and two Meeting Directors

Audio Endpoint Compatibility for Release 8.6

The following Cisco Unified IP Phones are supported in Release 8.6:

  • 7940 G and G-GE series (SCCP only)
    • Minimum firmware version 6.0(4.3), also called App Load ID P00306000403
  • 7941, 7942, and 7945
  • 7960 G and G-GE series (SCCP only)
    • Minimum firmware version 6.0(4.3), also called App Load ID P00306000403
  • 7961, 7962 and 7965
  • 7970 G series
  • 7971, 7975
  • 8961
  • 9951 and 9971
  • Cisco IP Communicator Release 1.1(5) or later


Note: For information about upgrading the firmware, see the Cisco Unified Communications Manager documentation.



Video Endpoint Compatibility for Release 8.6

This section provides compatibility information between Cisco Unified MeetingPlace Release 8.6 and various video terminals when using Cisco Unified Communications Manager (CUCM).

All testing was performed with Cisco Unified MeetingPlace connected to Cisco Unified Communications Manager via SIP trunk. 

  • Cisco Unified MeetingPlace Release 8.6 was tested with CUCM 10.0.

For H.323 testing, the terminal was registered to a H.323 Gatekeeper, which was connected to Cisco Unified Communications Manager through an H.323 trunk. For SIP and SCCP, the terminal was registered directly to Cisco Unified Communications Manager.


Notes:

  • WebEx-scheduling deployments do not support Cisco Unified Communications Manager Release 8.0(1) and 8.0(2).
  • Endpoints with the following test results are likely to drop calls when transferring to a breakout session, initiating a #31 dial-out call, or exiting the meeting with #9:
    • Dial in-fail
    • Dial out-fail
    • Direct to meeting-OK or "-"
These video endpoints typically do not correctly support the required media transfer mechanism.
  • Transferring a Cisco Unified MeetingPlace call from a Cisco-brand phone to a third-party SIP video terminal is likely to result in an audio-only connection. This is due to differences in the way Cisco and third-party terminals negotiate transport of telephony events. The differences cause Cisco Unified Communications Manager to insert a media termination point (MTP) in the call. Unless a hardware MTP resource is available, this insertion will block the video stream.


Release 8.6 Compatibility Test Results with the Hardware Media Server

Following are the test results for video endpoint compatibility when using Cisco Unified MeetingPlace Release 8.6 with a Hardware Media Server (HMS).

For a complete list of supported endpoints, refer to http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.6_--_Compatibility_Matrix

Notes:

  • The Hardware Media Server supplies Standard Definition video. High Definition video is not supported.
  • H.323 endpoints must be configured as video terminals in order to have video.


Manufacturer/Brand Model/Series Protocol Video Rate (1)
Codec
Dial In Dial Out Direct to Meeting 4CIF Version Tested Notes

Cisco

Cisco Unified Video Advantage and Cisco IP Communicator/79XX

SCCP

SR

H263

OK

OK

OK


CUVA 2.2.2.3, CIPC 8.6.2.0


H264

OK

OK

OK



HR

H261

Audio Only

Audio Only

Audio Only


H261 not supported

H263

OK

OK

OK

N


H264

OK

OK

OK



Cisco

Cisco Unified IP Phone 9951/9971

SIP

SR

H263

Audio Only

Audio Only

Audio Only


sip9951.9-3-424

H263 not supported

H264

OK

OK

OK



HR

H261

Audio Only

Audio Only

Audio Only


H261 not supported

H263

Audio Only

Audio Only

Audio Only


H263 not supported

H264

OK

OK

OK



Cisco

Cisco TelePresence MXP 1700

SIP

SR

H263

OK

OK

OK


F9.3.1 PAL


H264

OK

OK

OK



HR

H261

OK

OK

OK



H263

OK

OK

OK

Y


H264

OK

OK

OK



Cisco

Cisco TelePresence MXP 1700

H323

SR

H263

OK

OK

OK


F9.3.1 PAL


H264

OK

OK

OK



HR

H261

OK

OK

OK



H263

OK

OK

OK

Y


H264

OK

OK

OK



Cisco

Cisco IP Phone 7985

SCCP


SR

H263

OK

OK

OK


cmterm_7985.4-1-7-0


H264

OK

OK

OK



HR

H261

OK

OK

OK



H263

OK

OK

OK

N


H264

OK

OK

OK



Cisco

Cisco IP Video Phone E20

SIP


SR

H263

OK

OK

OK


TE4.1.3.303423


H264

OK

OK

OK



HR

H261

OK

OK

OK



H263

OK

OK

OK

N


H264

OK

OK

OK



LifeSize

Passport

SIP

SR

H263

OK

OK

OK


LS_PP1_4.8.3(5)


H264

OK

OK

OK



HR

H261

Audio Only

Audio Only

Audio Only



H263

OK

OK

OK

Y


H264

OK

OK

OK



LifeSize

Passport

H323

SR

H263

OK

OK

OK


LS_PP1_4.8.3(5)


H264

OK

OK

OK



HR

H261

OK

OK

OK



H263

OK

OK

OK

Y


H264

OK

OK

OK




(1) HR - High Rate, SR - Standard Rate, see http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.6_--_Compatibility_Matrix#Video_Format_Support_for_Release_8.6.

 Release 8.6 Compatibility Test Results with the Express Media Server

Following are the test results for video endpoint compatibility when using Cisco Unified MeetingPlace Release 8.6 with an Express Media Server (EMS).


For a complete list of supported endpoints, refer to http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.6_--_Compatibility_Matrix .


Manufacturer/Brand Model/Series Protocol Device Type (2) Dial In Dial Out Direct to Meeting Version Tested Notes

Cisco

Cisco Unified IP Phone 9951

Cisco Unified IP Phone 9971

SIP

H.263

NA

NA

NA

sip99xx.9-3-4-24

H.263 not supported

H.264 Level 1.1

OK

OK

OK


H.264 Level 1.3

OK

OK

OK


H.264 Level 3.0

OK

OK

OK


H.264 Level 3.1

Audio only

Audio only

Audio only


Cisco

Cisco IP Phone 7985

SCCP

H.263

OK

OK

OK

cmterm_7985.4-1-7-0

Transmits SIF video resolution inside mobile conference

H.264 Level 1.1

OK

OK

OK

H.264 Level 1.3

OK

OK

OK

H.264 Level 3.0

Audio only

Audio only

Audio only

H.264 Level 3.1

Audio only

Audio only

Audio only

Cisco

Cisco Unified Video Advantage and Cisco IP Communicator/79XX IP Phones

SCCP

H.263

OK

OK

OK

CUVA 2.2.2.3 and CIPC 8.6.2.0

 


H.264 Level 1.1

OK

OK

OK

H.264 Level 1.3

OK

OK

OK

H.264 Level 3.0

Audio only

Audio only

Audio only

H.264 Level 3.1

Audio only

Audio only

Audio only

Cisco

Cisco Unified Video Advantage and Cisco Unified IP Phone 9951

SIP

H.263

NA

NA

NA

CUVA 2.2.2.3 and sip9951.9-3-4-24

H.263 not supported

H.264 Level 1.1

OK

OK

OK


H.264 Level 1.3

OK

OK

OK


H.264 Level 3.0

Audio only

Audio only

Audio only


H.264 Level 3.1

Audio only

Audio only

Audio only


Cisco

Cisco IP Video Phone E20

SIP

H.263

OK

OK

OK

TE4.1.3.303423


H.264 Level 1.1

OK

OK

OK

H.264 Level 1.3

OK

OK

OK

H.264 Level 3.0

Audio only

Audio only

Audio only

H.264 Level 3.1

Audio only

Audio only

Audio only

Cisco

Cisco TelePresence 1700 MXP

H.323

H.263

OK

OK

OK

F9.3.1 PAL


H.264 Level 1.1

OK

OK

OK


H.264 Level 1.3

Audio only

Audio only

Audio only


H.264 Level 3.0

Audio only

Audio only

Audio only


H.264 Level 3.1

Audio only

Audio only

Audio only


Cisco

Cisco TelePresence 1700 MXP

SIP

H.263

 OK

OK

OK

F9.3.1 PAL


H.264 Level 1.1

OK

OK

OK


H.264 Level 1.3

 OK

OK

OK


H.264 Level 3.0

Audio only

Audio only

Audio only


H.264 Level 3.1

Audio only

Audio only

Audio only


LifeSize

Passport

H.323

H.263

OK

OK

OK

LS_PP1_4.8.3(5)

Transmits CIF resolution inside mobile conference

H.264 Level 1.1

OK

OK

OK

H.264 Level 1.3

OK

OK

OK

H.264 Level 3.0

OK

OK 

OK

H.264 Level 3.1

Audio only

OK

OK


LifeSize

Passport

SIP

H.263

OK

OK

OK

 LS_PP1_4.8.3(5)

Transmits CIF resolution inside mobile conference

H.264 Level 1.1

 OK

OK

OK

H.264 Level 1.3

OK

OK

OK


H.264 Level 3.0

OK

OK

OK


H.264 Level 3.1

OK

OK

Audio only



(2) H.264 Level 1.1 = Mobile mode, H.264 Level 1.3 = Desktop mode, H.264 Level 3.0 = VGA mode, H.264 Level 3.1 = High Definition mode


Related Topics

Terminology Used in Video Endpoint Compatibility Test Results for Release 8.6

The following table describes the terminology used in Table: Video Endpoints Compatible with Cisco Unified MeetingPlace Release 8.6 and HMS and Table: Video Endpoints Compatible with Cisco Unified MeetingPlace Release 8.6 and EMS.


Terminology Description
Test

Dial In

Tested dialing in to Cisco Unified MeetingPlace.

Dial Out

Tested dialing out from Cisco Unified MeetingPlace by using a web browser command or by using the TUI command #31.

Direct to Meeting

Tested dialing out from Cisco Unified MeetingPlace using the scheduled "direct to meeting" mode. The process was to configure a video terminal profile for outdial to terminal, tell the video terminal to skip the meeting entry prompts on outdial, and then invite the terminal to the meeting.

4CIF

Tested whether the terminal worked when tested with 4CIF using H.263.

Result

OK

The terminal was able to enter a meeting using video.

Audio Only

The terminal was able to enter a meeting, but without video or with one-way video.

Fail

The terminal was not able to enter a meeting. The failure may have been at initial connection or at meeting entry.

"-"

The terminal was not tested in this mode.


Video Format Support for Release 8.6

Table: Supported Video Formats lists the supported video formats for various combinations of the scheduler user's Video Preferences and the codec used by the video terminal.


Note: If Cisco Unified Communications Manager causes the connection rate to be lower than the maximum for your scheduler user's Video Preferences (384 kbps for standard rate, 2 Mbps for high rate), then the resolution or frames per second sent by Cisco Unified MeetingPlace may be reduced.


Video Mode Codec Video Format Frames per Second
High rate (2 Mbps maximum)

H.264

CIF, QCIF

30

H.263

4CIF

15

H.263

CIF, QCIF

30

H.261

CIF, QCIF

30

Standard rate (384 kbps maximum)

H.264

CIF

15

H.264

QCIF

30

H.263

CIF, QCIF

30

Rating: 0.0/5 (0 votes cast)

Personal tools