Cisco Unified MeetingPlace Release 8.5 -- System Requirements for Audio-Only Deployments - Revision history

Miro: /* Hardware and Software Requirements */

2013-03-18T21:18:34Z

Hardware and Software Requirements

← Older revision		Revision as of 21:18, 18 March 2013
Line 98:		Line 98:
	Cisco Unified MeetingPlace Release 8.5 supports the following versions of Cisco Unified Communications Manager (CUCM):		Cisco Unified MeetingPlace Release 8.5 supports the following versions of Cisco Unified Communications Manager (CUCM):

-	*CUCM 6.1(5), 7.0(2), 7.1(5), 8.0(1), 8.0(2), 8.0(3), 8.5(1), 8.6(1), 9.0(1), ~~9.1(1)~~	+	*CUCM 6.1(5), 7.0(2), 7.1(5), 8.0(1), 8.0(2), 8.0(3), 8.5(1), 8.6(1), 9.0(1),
	*CUCM-SME 7.1(3), 8.0, 8.5		*CUCM-SME 7.1(3), 8.0, 8.5

Jvasilje: Changed per QA request

2013-03-01T11:28:51Z

Changed per QA request

← Older revision		Revision as of 11:28, 1 March 2013
Line 98:		Line 98:
	Cisco Unified MeetingPlace Release 8.5 supports the following versions of Cisco Unified Communications Manager (CUCM):		Cisco Unified MeetingPlace Release 8.5 supports the following versions of Cisco Unified Communications Manager (CUCM):

-	*CUCM 6.1(5), 7.0(2), 7.1(5), 8.0(1), 8.0(2), 8.0(3), 8.5(1), 8.6(1), 9.0(1)	+	*CUCM 6.1(5), 7.0(2), 7.1(5), 8.0(1), 8.0(2), 8.0(3), 8.5(1), 8.6(1), 9.0(1), 9.1(1)
	*CUCM-SME 7.1(3), 8.0, 8.5		*CUCM-SME 7.1(3), 8.0, 8.5

Jvasilje at 10:56, 13 February 2013

2013-02-13T10:56:22Z

← Older revision		Revision as of 10:56, 13 February 2013
Line 98:		Line 98:
	Cisco Unified MeetingPlace Release 8.5 supports the following versions of Cisco Unified Communications Manager (CUCM):		Cisco Unified MeetingPlace Release 8.5 supports the following versions of Cisco Unified Communications Manager (CUCM):

-	*CUCM 6.1(5), 7.0(2), 7.1(5), 8.0(1), 8.0(2), 8.0(3), 8.5(1), 8.6(1), 9.0(1~~), 10.0 (Release 8.5.5 [8.5 MR3] only~~)	+	*CUCM 6.1(5), 7.0(2), 7.1(5), 8.0(1), 8.0(2), 8.0(3), 8.5(1), 8.6(1), 9.0(1)
	*CUCM-SME 7.1(3), 8.0, 8.5		*CUCM-SME 7.1(3), 8.0, 8.5

	'''Notes:'''		'''Notes:'''
-	* CUCM 10.0 is supported in Cisco Unified MeetingPlace Release 8.5.5 only.	+
	* CUCM 8.6 is supported in Cisco Unified MeetingPlace Release 8.5.2 and later.		* CUCM 8.6 is supported in Cisco Unified MeetingPlace Release 8.5.2 and later.
	* Ad-hoc (SCCP) meetings are supported in Cisco Unified MeetingPlace Release 8.5.2 and later. Ad-hoc meetings are not supported with CUCM 8.5.		* Ad-hoc (SCCP) meetings are supported in Cisco Unified MeetingPlace Release 8.5.2 and later. Ad-hoc meetings are not supported with CUCM 8.5.

MeetingPlace Moderator: /* Hardware and Software Requirements */

2012-11-06T21:41:30Z

Hardware and Software Requirements

← Older revision		Revision as of 21:41, 6 November 2012
Line 98:		Line 98:
	Cisco Unified MeetingPlace Release 8.5 supports the following versions of Cisco Unified Communications Manager (CUCM):		Cisco Unified MeetingPlace Release 8.5 supports the following versions of Cisco Unified Communications Manager (CUCM):

-	*CUCM 6.1(5), 7.0(2), 7.1(5), 8.0(1), 8.0(2), 8.0(3), 8.5(1), 8.6(1), 10.0 (Release 8.5.5 [8.5 MR3] only)	+	*CUCM 6.1(5), 7.0(2), 7.1(5), 8.0(1), 8.0(2), 8.0(3), 8.5(1), 8.6(1), 9.0(1), 10.0 (Release 8.5.5 [8.5 MR3] only)
	*CUCM-SME 7.1(3), 8.0, 8.5		*CUCM-SME 7.1(3), 8.0, 8.5

MeetingPlace Moderator: /* Hardware and Software Requirements */

2012-11-05T20:13:20Z

Hardware and Software Requirements

← Older revision		Revision as of 20:13, 5 November 2012
Line 98:		Line 98:
	Cisco Unified MeetingPlace Release 8.5 supports the following versions of Cisco Unified Communications Manager (CUCM):		Cisco Unified MeetingPlace Release 8.5 supports the following versions of Cisco Unified Communications Manager (CUCM):

-	*CUCM 6.1(5), 7.0(2), 7.1(5), 8.0(1), 8.0(2), 8.0(3), 8.5(1), 8.6(1)	+	*CUCM 6.1(5), 7.0(2), 7.1(5), 8.0(1), 8.0(2), 8.0(3), 8.5(1), 8.6(1), 10.0 (Release 8.5.5 [8.5 MR3] only)
	*CUCM-SME 7.1(3), 8.0, 8.5		*CUCM-SME 7.1(3), 8.0, 8.5

	'''Notes:'''		'''Notes:'''
		+	* CUCM 10.0 is supported in Cisco Unified MeetingPlace Release 8.5.5 only.
	* CUCM 8.6 is supported in Cisco Unified MeetingPlace Release 8.5.2 and later.		* CUCM 8.6 is supported in Cisco Unified MeetingPlace Release 8.5.2 and later.
	* Ad-hoc (SCCP) meetings are supported in Cisco Unified MeetingPlace Release 8.5.2 and later. Ad-hoc meetings are not supported with CUCM 8.5.		* Ad-hoc (SCCP) meetings are supported in Cisco Unified MeetingPlace Release 8.5.2 and later. Ad-hoc meetings are not supported with CUCM 8.5.

Cgriffen: /* Network Requirements */

2012-10-30T17:40:37Z

Network Requirements

← Older revision		Revision as of 17:40, 30 October 2012
Line 178:		Line 178:

	'''Note:''' Signaling between Cisco Unified MeetingPlace and Cisco Unified Communications Manager must be TCP.		'''Note:''' Signaling between Cisco Unified MeetingPlace and Cisco Unified Communications Manager must be TCP.
		+
		+
		+	===DNS Recommendations===
		+
		+	*All FQDNs of meeting director nodes (if applicable), conferencing nodes, and Cisco WebEx nodes are required for DNS resolution between all servers.
		+	*No multiple names to IP addresses.
		+	*Reverse IP lookup is required.
		+	*Classless DNS is not supported.
		+	*CUCM must have DNS enabled to resolve the Cisco Unified MeetingPlace hostnames for the SIP refer commands to be successful.

Annekim: /* Hardware and Software Requirements */

2012-06-18T15:00:55Z

Hardware and Software Requirements

← Older revision		Revision as of 15:00, 18 June 2012
Line 102:		Line 102:

	'''Notes:'''		'''Notes:'''
-	* CUCM 8.6 is supported in Cisco Unified MeetingPlace Release 8.5.2 ~~only~~.	+	* CUCM 8.6 is supported in Cisco Unified MeetingPlace Release 8.5.2 and later.
-	* Ad-hoc (SCCP) meetings are supported in Cisco Unified MeetingPlace Release 8.5.2 ~~only~~. Ad-hoc meetings are not supported with CUCM 8.5.	+	* Ad-hoc (SCCP) meetings are supported in Cisco Unified MeetingPlace Release 8.5.2 and later. Ad-hoc meetings are not supported with CUCM 8.5.
	* CUCM 8.0(3) is the only release that supports SIP Refers for multinode Cisco Unified MeetingPlace systems (WebEx-scheduling deployments). If you require this support, open a case with Cisco TAC against the Cisco Unified Communications Manager to obtain the latest Engineering Special (ES) or Service Update (SU) version of CUCM 8.0(3).		* CUCM 8.0(3) is the only release that supports SIP Refers for multinode Cisco Unified MeetingPlace systems (WebEx-scheduling deployments). If you require this support, open a case with Cisco TAC against the Cisco Unified Communications Manager to obtain the latest Engineering Special (ES) or Service Update (SU) version of CUCM 8.0(3).

MeetingPlace Moderator: 1 revision

2011-08-01T18:31:12Z

1 revision

← Older revision

Revision as of 18:31, 1 August 2011

Annekim: /* Failover Requirements */

2011-07-27T23:55:30Z

Failover Requirements

← Older revision		Revision as of 23:55, 27 July 2011
Line 37:		Line 37:
	'''Software'''		'''Software'''

-	* Cisco Unified MeetingPlace Application Server Release 8.5	+	* Cisco Unified MeetingPlace Application Server Release 8.5/Express Media Server (EMS)
	* Cisco Security Agent Release 6.0.1.112		* Cisco Security Agent Release 6.0.1.112
-	* Express Media Server (EMS)	+

	'''Notes:'''		'''Notes:'''

	*The Express Media Server is a set of software modules that reside on the Application Server. During installation, you will have the option to choose either the Hardware Media Server or the Express Media Server. For details about the EMS, see the [[Cisco Unified MeetingPlace Release 8.5 -- Hardware Requirements#Express Media Server Requirements\|Express Media Server Requirements]].		*The Express Media Server is a set of software modules that reside on the Application Server. During installation, you will have the option to choose either the Hardware Media Server or the Express Media Server. For details about the EMS, see the [[Cisco Unified MeetingPlace Release 8.5 -- Hardware Requirements#Express Media Server Requirements\|Express Media Server Requirements]].
		+	* The Cisco Security Agent software is packaged and installed during the Application Server installation. For details, see the "Using Cisco Security Agent (CSA) on the Application Server" in the ''Configuration Guide for Cisco Unified MeetingPlace Release 8.5'' at http://www.cisco.com/en/US/products/sw/ps5664/ps5669/products_installation_and_configuration_guides_list.html.
	* The Cisco Unified MeetingPlace integration for Microsoft Outlook scheduling is included on the Application Server.		* The Cisco Unified MeetingPlace integration for Microsoft Outlook scheduling is included on the Application Server.
-
-
-	~~For information about Cisco Security Agent, see http://www.cisco.com/en/US/products/sw/secursw/ps5057/tsd_products_support_series_home.html.~~


Line 75:		Line 73:
	'''Software'''		'''Software'''

-	*(Optional) Cisco Security Agent Release 6.0.1.117	+	*(Optional) Cisco Security Agent Release 6.0.1.117 for Cisco Unified MeetingPlace
	*(Optional) Cisco Unified MeetingPlace Web Server Release 8.5		*(Optional) Cisco Unified MeetingPlace Web Server Release 8.5
-
-	~~For information about Cisco Security Agent, see http://www.cisco.com/en/US/products/sw/secursw/ps5057/tsd_products_support_series_home.html.~~


Line 102:		Line 98:
	Cisco Unified MeetingPlace Release 8.5 supports the following versions of Cisco Unified Communications Manager (CUCM):		Cisco Unified MeetingPlace Release 8.5 supports the following versions of Cisco Unified Communications Manager (CUCM):

-	*CUCM 6.1(5), 7.0(2), 7.1(5), 8.0(2), 8.5(1)	+	*CUCM 6.1(5), 7.0(2), 7.1(5), 8.0(1), 8.0(2), 8.0(3), 8.5(1), 8.6(1)
	*CUCM-SME 7.1(3), 8.0, 8.5		*CUCM-SME 7.1(3), 8.0, 8.5
		+
		+	'''Notes:'''
		+	* CUCM 8.6 is supported in Cisco Unified MeetingPlace Release 8.5.2 only.
		+	* Ad-hoc (SCCP) meetings are supported in Cisco Unified MeetingPlace Release 8.5.2 only. Ad-hoc meetings are not supported with CUCM 8.5.
		+	* CUCM 8.0(3) is the only release that supports SIP Refers for multinode Cisco Unified MeetingPlace systems (WebEx-scheduling deployments). If you require this support, open a case with Cisco TAC against the Cisco Unified Communications Manager to obtain the latest Engineering Special (ES) or Service Update (SU) version of CUCM 8.0(3).
		+
		+
	\|-		\|-
	\|		\|
Line 120:		Line 123:
	Cisco Unified MeetingPlace PhoneView		Cisco Unified MeetingPlace PhoneView
	\|		\|
-	Cisco Unified MeetingPlace PhoneView is available only to Cisco Unified IP Phones that are registered to Cisco Unified Communications Manager~~. MeetingPlace PhoneView is only supported in MeetingPlace-scheduling and audio-only deployments~~.	+	Cisco Unified MeetingPlace PhoneView is available only to Cisco Unified IP Phones that are registered to Cisco Unified Communications Manager.


Line 146:		Line 149:
	== License Requirements ==		== License Requirements ==

-	This release of Cisco Unified MeetingPlace uses host-based licensing. The system uses an audit mechanism to track the number of users who have created meetings and compare that to the number of licenses that are installed. An alarm is raised when the number of ~~user~~ who create meetings exceeds the number of licenses installed.	+	This release of Cisco Unified MeetingPlace uses host-based licensing. The system uses an audit mechanism to track the number of users who have created meetings and compare that to the number of licenses that are installed. An alarm is raised when the number of users who create meetings exceeds the number of licenses installed.
-		+

	If you have no licenses installed the system will allow only a single meeting at a time.		If you have no licenses installed the system will allow only a single meeting at a time.


		+	'''Note:''' If you are completing a Cisco UCS installation under VMware, note that the Cisco Unified MeetingPlace system produces a randomly generated 12-digit "MAC address" that you will require for licensing. To obtain the MAC address, make sure that you install the Meeting Directors first. You can then obtain the randomly generated MAC address and register your license key.

	== Failover Requirements ==		== Failover Requirements ==

-	To configure failover, you need two Application Servers with a high-speed network connection ~~(preferably~~ 100Mpbs or better) between them. Failover configuration requires the following:	+	To configure failover, you need two Application Servers with a high-speed network connection of 100Mpbs or better between them. Failover configuration requires the following:
	* When you configure the Application Server for the Express Media Server, both the primary and secondary failover Express Media Servers must have the same licenses and port distribution.		* When you configure the Application Server for the Express Media Server, both the primary and secondary failover Express Media Servers must have the same licenses and port distribution.
-	* The time must be synchronized between ~~the two Application Servers~~. This is required to resolve conflicts when the same piece of data is modified simultaneously in both Application Servers.	+	* The active and standby Application Servers can be on different timezones, but the time must be synchronized between them. This is required to resolve conflicts when the same piece of data is modified simultaneously in both Application Servers.
-	* ~~If the primary and failover Application Servers share a common set of Audio and Video Blades~~, ~~you must add all the Audio Blades to~~ both ~~Applications~~ Servers~~. Be sure~~ to ~~use~~ the same ~~passwords and SNMP community names on the two systems~~ or the ~~failover mechanism will not work~~.	+	* To ensure that times are synchronized, we recommend that both Application Servers are synchronized to the same NTP server. If different NTP servers are used, make sure that these NTP servers are high-Stratum servers, that is, stratum-1 or stratum-2, to minimize the chance of an Application Server synchronizing to an inaccurate clock.
		+


Line 271:		Line 275:
	\|		\|

		+	SIP over TLS
		+	\|
		+	Cisco Unified Communications Manager (CUCM)
		+	\|
		+	Application Server
		+	\|
		+	TCP UDP
		+	\|
		+
		+	5061
		+	\|
		+
		+	SIP B2BUA; UDP optional
		+	\|
		+	--
		+
		+	\|-
		+	\|
	HTTP		HTTP
	\|		\|
Line 767:		Line 789:
	\|		\|
	5060		5060
		+	\|
		+	SIP
		+	\|
		+	--
		+	\|-
		+	\|
		+
		+	SIP over TLS
		+	\|
		+	Application Server
		+	\|
		+	CUCM
		+	\|
		+	TCP UDP
		+	\|
		+	5061
	\|		\|
	SIP		SIP
Line 798:		Line 836:
	\|		\|
	5060		5060
		+	\|
		+	--
		+	\|
		+	--
		+	\|-
		+	\|
		+
		+	SIP over TLS
		+	\|
		+	CUPC
		+	\|
		+	CUCM
		+	\|
		+	TCP UDP
		+	\|
		+	5061
	\|		\|
	--		--

Annekim: /* Hardware and Software Requirements */ editing

2011-06-21T17:42:45Z

Hardware and Software Requirements: editing

← Older revision		Revision as of 17:42, 21 June 2011
Line 120:		Line 120:
	Cisco Unified MeetingPlace PhoneView		Cisco Unified MeetingPlace PhoneView
	\|		\|
-	Cisco Unified MeetingPlace PhoneView is available only to Cisco Unified IP Phones that are registered to Cisco Unified Communications Manager. MeetingPlace PhoneView only ~~will work~~ in MeetingPlace ~~Scheduling or Audio~~ only ~~deployment models~~.	+	Cisco Unified MeetingPlace PhoneView is available only to Cisco Unified IP Phones that are registered to Cisco Unified Communications Manager. MeetingPlace PhoneView is only supported in MeetingPlace-scheduling and audio-only deployments.