Cisco Unified MeetingPlace Release 8.5 -- Hardware Requirements

From DocWiki

(Difference between revisions)
Jump to: navigation, search
(Table: Audio and Video Scalability Numbers for Cisco Unified MeetingPlace)
(CSCud27119 8.5 MR3 Supports VMware ESXi 4.1 and 5.0; can use Enterprise Plus or Standard license with ESXi 5.0 on C240 M3/C220 M3/C210 M2/C200 M2/B200 M2/B200 M3)
(43 intermediate revisions not shown)
Line 9: Line 9:
This document provides information for all releases of Cisco Unified MeetingPlace Release 8.5, including the following:
This document provides information for all releases of Cisco Unified MeetingPlace Release 8.5, including the following:
-
* Release 8.5.1
+
* Release 8.5.5 (also referred to as MR3)
 +
* Release 8.5.4 (also referred to as MR2)
 +
* Release 8.5.3 (also referred to as MR1)
* Release 8.5.2
* Release 8.5.2
 +
* Release 8.5.1
Any release-specific information is indicated as such.
Any release-specific information is indicated as such.
Line 41: Line 44:
====Virtual Machine Requirements====
====Virtual Machine Requirements====
-
*VMware ESX(i) 4.1 or later running Enterprise Plus Edition VMware license
+
* VMware ESXi 5.0 and 5.0 Update 1 (Release 8.5.5 [8.5 MR3] only). The VMware Standard license is sufficient for the Cisco UCS C240 M3, the Cisco UCS C220 M3, the Cisco UCS C210 M2, the Cisco UCS C200 M2, the Cisco UCS B200 M3, and the UCS B200 M2. The VMware Enterprise Plus license is also supported.
-
*Install one virtual machine, per blade on a supported Cisco Unified Computer Server (UCS)
+
* VMware ESXi 4.1 running Enterprise Plus Edition VMware license for Cisco UCS C240 M3/C220 M3/C210 M2/B200 M3/B200 M2 and Standard or Enterprise Plus for Cisco UCS C200 M2.
 +
* Install one virtual machine, per blade on a supported Cisco Unified Computer Server (UCS)
* LAN connection must support up to 1GB/s
* LAN connection must support up to 1GB/s
* Component-specific requirements are indicated in the following table:
* Component-specific requirements are indicated in the following table:
Line 54: Line 58:
|-
|-
|
|
-
Application Server/Express Media Server
+
Application Server/Express Media Server or combined
 +
Meeting Director/Application Server/Express Media Server
 +
(Less than 4 Audio node total allowed)
|
|
-
8 virtual CPU (2.4 GHz), 8GB RAM, 300GB hard drive  
+
8 virtual CPU (2.4 GHz), 8GB RAM, 300GB hard drive (C240 M3/C220 M3/<br>C210 M2/B200 M3/B200 M2)
 +
*Enterprise Plus VMware 4.X
 +
*Standard or Enterprise Plus VMware 5.0 and 5.0 update 1 (Release 8.5.5 [8.5 MR3] only)
 +
 
 +
4 virtual CPU, 8GB RAM, 300GB hard drive, (C200 M2)
 +
*Standard or Enterprise Plus VMware 4.X
 +
*Standard or Enterprise Plus VMware 5.0 and 5.0 update 1 (Release 8.5.5 [8.5 MR3] only)
|-
|-
|
|
-
Meeting Director
+
Meeting Director (Standalone for more than 4 Audio node deployment)
|
|
-
8 virtual CPU (2.4 GHz), 8GB RAM, 300GB hard drive  
+
8 virtual CPU (2.4 GHz), 8GB RAM, 300GB hard drive (C240 M3/C220 M3/<br>C210 M2/B200 M3/B200 M2)
 +
*Enterprise Plus VMware 4.X
 +
*Standard or Enterprise Plus VMware 5.0 and 5.0 update 1 (Release 8.5.5 [8.5 MR3] only)
 +
 
 +
4 virtual CPU, 8GB RAM, 300GB hard drive, (C200 M2)
 +
*Standard or Enterprise Plus VMware 4.X
 +
*Standard or Enterprise Plus VMware 5.0 and 5.0 update 1 (Release 8.5.5 [8.5 MR3] only)
|-
|-
|
|
Cisco WebEx Node for MCS
Cisco WebEx Node for MCS
|
|
-
8 virtual CPU (2.4 GHz), 8GB RAM, 300GB hard drive  
+
8 virtual CPU (2.4 GHz), 8GB RAM, 300GB hard drive (C240 M3/C220 M3/<br>C210 M2/B200 M3/B200 M2)
 +
*Enterprise Plus VMware 4.X
 +
*Standard or Enterprise Plus VMware 5.0 and 5.0 update 1 (Release 8.5.5 [8.5 MR3] only)
 +
 
 +
4 virtual CPU, 8GB RAM, 300GB hard drive, (C200 M2)
 +
*Standard or Enterprise Plus VMware 4.X
 +
*Standard or Enterprise Plus VMware 5.0 and 5.0 update 1 (Release 8.5.5 [8.5 MR3] only)
|-
|-
|
|
MeetingPlace Web Server
MeetingPlace Web Server
|
|
-
4 virtual CPU (2.4 GHz), 4GB RAM, 300GB hard drive  
+
4 virtual CPU (2.4 GHz), 4GB RAM, 300GB hard drive (C240 M3/C220 M3/<br>C210 M2/C200 M2/B200 M3/B200 M2)
-
 
+
*Standard or Enterprise Plus VMware 4.X
-
'''Note:''' The virtualized Cisco Unified MeetingPlace web server supports both the Standard and Enterprise Plus Edition VMware license.  
+
*Standard or Enterprise Plus VMware 5.0 and 5.0 update 1 (Release 8.5.5 [8.5 MR3] only)
 +
*MeetingPlace Web Server release 8.5.1 is NOT supported on UCS
|}
|}
Line 91: Line 116:
'''Note:''' Cisco UCS requires dedicated servers for each component of Cisco Unified MeetingPlace software.
'''Note:''' Cisco UCS requires dedicated servers for each component of Cisco Unified MeetingPlace software.
 +
===== Cisco UCS C220 M3=====
 +
*C220 M3 - UCS-CPU-E5-2665&nbsp; 2x8 cores @ 2.4 GHz, 4x8GB memory
 +
 +
===== C220 M3S (SFF) LSI 2008 RAID =====
 +
{| border = 1
 +
|-
 +
!Ordered Item
 +
!Quantity
 +
!Description
 +
|-
 +
|
 +
UCSC-C220-M3S
 +
|
 +
1
 +
|
 +
UCS C220 M3 SFF w/o CPU, mem, HD, PCIe, w/ rail kit
 +
|-
 +
|
 +
 +
UCS-CPU-E5-2665
 +
|
 +
2
 +
|
 +
2.40 GHz E5-2665/115W 8C/20MB Cache/DDR3 1600MHz
 +
|-
 +
|
 +
 +
UCS-MR-1X082RY-A
 +
|
 +
4
 +
|
 +
8GB DDR3-1600-MHz RDIMM/PC3-12800/dual rank/1.35v
 +
|-
 +
|
 +
 +
A03-D500GC3
 +
|
 +
4
 +
|
 +
500GB 6Gb SATA 7.2K RPM SFF hot plug/drive sled mounted
 +
|-
 +
|
 +
 +
UCSC-RAID-11-C220
 +
|
 +
1
 +
|
 +
LSI 2008 SAS RAID Mezzanine Card for UCS C220 server
 +
|-
 +
|
 +
 +
N2XX-ACPCI01
 +
|
 +
1
 +
|
 +
Cisco UCS P81E Virtual Interface Card/ 2-port 10Gbps-6
 +
|-
 +
|
 +
 +
UCSC-PSU-650W
 +
|
 +
2
 +
|
 +
650W power supply for C-series rack servers
 +
|-
 +
|
 +
 +
UCSC-HS-C220M3
 +
|
 +
2
 +
|
 +
Auto-included: Heat Sink for UCS C220 M3 Rack Server-10 (Sub-component of UCS C220 M3 SFF w/o CPU, mem, HDD, PCIe, PSU, w/ rail kit)
 +
|-
 +
|
 +
 +
UCSC-RAIL-2U
 +
|
 +
1
 +
|
 +
Auto-included: 2U Rail Kit for UCS C-Series server
 +
|-
 +
|
 +
 +
N20-BBLKD
 +
|
 +
4
 +
|
 +
Auto-included: UCS 2.5 inch HDD blanking panel
 +
|-
 +
|}
 +
 +
 +
===== C220 M3S (SFF) 9266-8i RAID =====
 +
{| border = 1
 +
|-
 +
!Ordered Item
 +
!Quantity
 +
!Description
 +
|-
 +
|
 +
UCSC-C220-M3S
 +
|
 +
1
 +
|
 +
UCS C220 M3 SFF w/o CPU, mem, HD, PCIe, w/ rail kit
 +
|-
 +
|
 +
 +
UCS-CPU-E5-2665
 +
|
 +
2
 +
|
 +
2.40 GHz E5-2665/115W 8C/20MB Cache/DDR3 1600MHz
 +
|-
 +
|
 +
 +
UCS-MR-1X082RY-A
 +
|
 +
4
 +
|
 +
8GB DDR3-1600-MHz RDIMM/PC3-12800/dual rank/1.35v
 +
|-
 +
|
 +
 +
A03-D500GC3
 +
|
 +
4
 +
|
 +
500GB 6Gb SATA 7.2K RPM SFF hot plug/drive sled mounted
 +
|-
 +
|
 +
 +
UCS-RAID-9266
 +
|
 +
1
 +
|
 +
MegaRAID 9266-8i + battery backup for C240 and C220-5
 +
|-
 +
|
 +
 +
N2XX-ACPCI01
 +
|
 +
1
 +
|
 +
Cisco UCS P81E Virtual Interface Card/ 2-port 10Gbps-6
 +
|-
 +
|
 +
 +
UCSC-PSU-650W
 +
|
 +
2
 +
|
 +
650W power supply for C-series rack servers
 +
|-
 +
|
 +
 +
UCSC-HS-C220M3
 +
|
 +
2
 +
|
 +
Auto-included: Heat Sink for UCS C220 M3 Rack Server-10 (Sub-component of UCS C220 M3 SFF w/o CPU, mem, HDD, PCIe, PSU, w/ rail kit)
 +
|-
 +
|
 +
 +
UCSC-RAIL-2U
 +
|
 +
1
 +
|
 +
Auto-included: 2U Rail Kit for UCS C-Series server
 +
|-
 +
|
 +
 +
N20-BBLKD
 +
|
 +
4
 +
|
 +
Auto-included: UCS 2.5 inch HDD blanking panel
 +
|-
 +
|}
 +
 +
===== Cisco UCS C240 M3=====
 +
*C240 M3 - UCS-CPU-E5-2665&nbsp;* *2x8 cores* *@ 2.4 GHz{*}*, 4x8GB memory
 +
 +
===== C240 M3S (SFF) 9266-8i RAID  =====
 +
{| border = 1
 +
|-
 +
!Ordered Item
 +
!Quantity
 +
!Description
 +
|-
 +
|
 +
UCSC-C240-M3S2
 +
|
 +
1
 +
|
 +
UCS C240 M3 SFF w/o CPU, mem, HD, PCIe, w/ rail kit
 +
|-
 +
|
 +
 +
UCS-CPU-E5-2665
 +
|
 +
2
 +
|
 +
2.40 GHz E5-2665/115W 8C/20MB Cache/DDR3 1600MHz
 +
|-
 +
|
 +
 +
UCS-MR-1X082RY-A
 +
|
 +
4
 +
|
 +
8GB DDR3-1600-MHz RDIMM/PC3-12800/dual rank/1.35v
 +
|-
 +
|
 +
 +
A03-D500GC3
 +
|
 +
4
 +
|
 +
500GB 6Gb SATA 7.2K RPM SFF hot plug/drive sled mounted
 +
|-
 +
|
 +
 +
UCS-RAID-9266
 +
|
 +
1
 +
|
 +
MegaRAID 9266-8i + battery backup for C240 and C220-5
 +
|-
 +
|
 +
 +
N2XX-ACPCI01
 +
|
 +
1
 +
|
 +
Cisco UCS P81E Virtual Interface Card/ 2-port 10Gbps-6
 +
|-
 +
|
 +
 +
UCSC-PSU-650W
 +
|
 +
2
 +
|
 +
650W power supply for C-series rack servers
 +
|-
 +
|
 +
 +
UCSC-HS-C240M3
 +
|
 +
2
 +
|
 +
Auto-included: Heat Sink for UCS C240 M3 Rack Server
 +
|-
 +
|
 +
 +
UCSC-RAIL-2U
 +
|
 +
1
 +
|
 +
Auto-included: 2U Rail Kit for UCS C-Series servers
 +
|-
 +
|
 +
 +
UCSC-SD-16G-C240
 +
|
 +
1
 +
|
 +
Auto-included: 16GB SD Card Module for C240 Servers
 +
|-
 +
|
 +
 +
N20-BBLKD
 +
|
 +
20
 +
|
 +
Auto-included: UCS 2.5 inch HDD blanking panel
 +
|-
 +
|
 +
 +
UCSC-PCIF-01F
 +
|
 +
3
 +
|
 +
Auto-included:Full height PCIe filler for C-Series
 +
|-
 +
|}
 +
 +
 +
===== Cisco UCS C210 M2=====
===== Cisco UCS C210 M2=====
-
The Cisco UCS C210 M2 is supported with both Cisco Unified MeetingPlace Release 8.5.1 and 8.5.2.  
+
The Cisco UCS C210 M2 is supported with all releases of Cisco Unified MeetingPlace Release 8.5.  
The  UCS-C210M2-VCD2 (TRC#1) is fully supported with VMware vSphere Enterprise Plus License (2 CPU), same capacity as bare metal configuration.   
The  UCS-C210M2-VCD2 (TRC#1) is fully supported with VMware vSphere Enterprise Plus License (2 CPU), same capacity as bare metal configuration.   
Line 221: Line 535:
|
|
LSI 6G MegaRAID 9261-8i card (RAID 0,1,5,6,10,60) - 512WC
LSI 6G MegaRAID 9261-8i card (RAID 0,1,5,6,10,60) - 512WC
 +
|-
 +
|
 +
 +
R2XX-LBBU
 +
|
 +
1
 +
|
 +
Battery Backup for the RAID controller (Highly recommended)
|-
|-
|
|
Line 294: Line 616:
=====Cisco UCS C200 M2 =====
=====Cisco UCS C200 M2 =====
-
The Cisco UCS C200 M2 is supported with Cisco Unified MeetingPlace '''Release 8.5.2 only'''. This platform is supported with the following deployments:
+
The Cisco UCS C200 M2 is supported with Cisco Unified MeetingPlace '''Release 8.5.2 and later'''. This platform is supported with the following deployments:
UCS-C200M2-VCD2 (TRC#1)
UCS-C200M2-VCD2 (TRC#1)
Line 442: Line 764:
====Supported Cisco UCS B Series Servers (General-purpose blade servers)====
====Supported Cisco UCS B Series Servers (General-purpose blade servers)====
 +
 +
===== Cisco UCS B200 M2=====
Release 8.5 supports the Cisco UCS B200 M2.
Release 8.5 supports the Cisco UCS B200 M2.
Line 604: Line 928:
'''Notes:'''   
'''Notes:'''   
*The above configuration is based on 1 chassis and 1 blade. Additional interconnect, fabric extender, and other components are required for redundant configurations.
*The above configuration is based on 1 chassis and 1 blade. Additional interconnect, fabric extender, and other components are required for redundant configurations.
-
* Release 8.5 also supports the following CPUs for M2 models: X5680 (3.33GHz), X5670 (2.93GHz), X5650 (2.66GHz), and E5640 (2.66GHz). The E5640 is supported with Release 8.5.2 only.
+
* Release 8.5 also supports the following CPUs for M2 models: X5680 (3.33GHz), X5670 (2.93GHz), X5650 (2.66GHz), and E5640 (2.66GHz). The E5640 is supported with '''Release 8.5.2 and later'''.
* VMware vSphere Enterprise Plus license is not included in the specifications above.
* VMware vSphere Enterprise Plus license is not included in the specifications above.
*Cisco product and service contracts are not included in the specifications above.  
*Cisco product and service contracts are not included in the specifications above.  
*Additional network equipment (i.e., Nexus switch) and accessories (i.e., 10Gb SFP + Cables) are not included in the specifications above.
*Additional network equipment (i.e., Nexus switch) and accessories (i.e., 10Gb SFP + Cables) are not included in the specifications above.
 +
 +
 +
===== Cisco UCS B200 M3=====
 +
*B200 M3 - UCS-CPU-E5-2665&nbsp;* *2x8 cores* *@ 2.4 GHz{*}*, 4x8GB memory
 +
 +
 +
===== B200 M3 Blade WITH 8 slot UCS chassis  =====
 +
{| border = 1
 +
|-
 +
!Ordered Item
 +
!Quantity
 +
!Description
 +
|-
 +
|
 +
N20-B6625-1-UPG
 +
|
 +
1
 +
|
 +
UCS 5108 Blade Svr AC Chassis/0 PSU/8 fans/0 fabric extender-1
 +
|-
 +
|
 +
 +
UCSB-B200-M3-D
 +
|
 +
1
 +
|
 +
UCS B200 M3 Blade Server w/o CPU, mem, HDD, mLOM/mezz
 +
|-
 +
|
 +
 +
UCS-CPU-E5-2665
 +
|
 +
2
 +
|
 +
2.40 GHz E5-2665/115W 8C/20MB Cache/DDR3 1600MHz
 +
|-
 +
|
 +
 +
UCS-MR-1X082RY-A
 +
|
 +
4
 +
|
 +
8GB DDR3-1600-MHz RDIMM/PC3-12800/dual rank/1.35v
 +
|-
 +
|
 +
 +
A03-D500GC3
 +
|
 +
4
 +
|
 +
500GB 6Gb SATA 7.2K RPM SFF hot plug/drive sled mounted
 +
|-
 +
|
 +
 +
UCSB-MLOM-40G-01
 +
|
 +
1
 +
|
 +
Cisco UCS VIC 1240 modular LOM for M3 blade servers
 +
|-
 +
|
 +
 +
N20-I6584
 +
|
 +
2
 +
|
 +
UCS 2104XP Fabric Extender/4 external 10Gb ports-12
 +
|-
 +
|
 +
 +
N20-FW010
 +
|
 +
1
 +
|
 +
UCS 5108 Blade Server Chassis FW package
 +
|-
 +
|
 +
 +
N01-UAC1
 +
|
 +
1
 +
|
 +
Single phase AC power module for UCS 5108-18
 +
|-
 +
|
 +
 +
UCSB-PSU-2500ACPL
 +
|
 +
2
 +
|
 +
2500W Platinum AC Hot Plug Power Supply for UCS 5108 Chassis
 +
|-
 +
|
 +
 +
UCSB-HS-01-EP
 +
|
 +
2
 +
|
 +
Auto-included: Heat Sink for UCS B200 M3 server-16
 +
|-
 +
|
 +
 +
N20-CAK
 +
|
 +
1
 +
|
 +
Auto-included: Access. kit for 5108 Blade Chassis incl Railkit, KVM dongle-19
 +
|-
 +
|
 +
 +
N20-CBLKB1
 +
|
 +
6
 +
|
 +
Auto-included: Blade slot blanking panel for UCS 5108/single slot-20
 +
|-
 +
|
 +
 +
N20-CBLKP
 +
|
 +
2
 +
|
 +
Auto-included: Power supply unit blanking panel for UCS 5108-21
 +
|-
 +
|
 +
 +
N20-FAN5
 +
|
 +
8
 +
|
 +
Fan module for UCS 5108-22
 +
|-
 +
|}
 +
 +
 +
===== B200M3 BLADE ONLY (requires UCS 8 slot chassis, UCS Manager SW, Fiber interconnect & Nexus switch)=====
 +
{| border = 1
 +
|-
 +
!Ordered Item
 +
!Quantity
 +
!Description
 +
|-
 +
|
 +
UCSB-B200-M3-U
 +
|
 +
1
 +
|
 +
UCS B200 M3 Blade Server w/o CPU, mem, HDD, mLOM/mezz (UPG)-1
 +
|-
 +
|
 +
 +
UCS-CPU-E5-2665
 +
|
 +
2
 +
|
 +
2.40 GHz E5-2665/115W 8C/20MB Cache/DDR3 1600MHz-2 (Sub-component of UCS B200 M3 Blade Server w/o CPU, mem, HDD, mLOM/mezz (UPG))
 +
|-
 +
|
 +
 +
UCS-MR-1X082RY-A
 +
|
 +
4
 +
|
 +
8GB DDR3-1600-MHz RDIMM/PC3-12800/dual rank/1.35v-3 (Sub-component of UCS B200 M3 Blade Server w/o CPU, mem, HDD, mLOM/mezz (UPG))
 +
|-
 +
|
 +
 +
A03-D500GC3
 +
|
 +
2
 +
|
 +
500GB 6Gb SATA 7.2K RPM SFF hot plug/drive sled mounted-4 (Sub-component of UCS B200 M3 Blade Server w/o CPU, mem, HDD, mLOM/mezz (UPG))
 +
|-
 +
|
 +
 +
UCSB-MLOM-40G-01
 +
|
 +
1
 +
|
 +
Cisco UCS VIC 1240 modular LOM for M3 blade servers
 +
|-
 +
|
 +
 +
UCSB-HS-01-EP
 +
|
 +
2
 +
|
 +
Heat Sink for UCS Blade Servers (EP Socket R)-6 (Sub-component of UCS B200 M3 Blade Server w/o CPU, mem, HDD, mLOM/mezz (UPG))
 +
|-
 +
|}
 +
 +
 +
 +
====B Series Blade Specification====
====B Series Blade Specification====
Line 711: Line 1,229:
**Latency: <10ms
**Latency: <10ms
**Bandwidth: >50MBps
**Bandwidth: >50MBps
 +
 +
 +
== Application Server Requirements ==
== Application Server Requirements ==
-
Cisco Unified MeetingPlace Application Server software is installed on either a Cisco Media Convergence Server (MCS), or on VMware ESX(i) 4.1 and later running on top of Cisco Unified Computer Servers (UCS).  
+
Cisco Unified MeetingPlace Application Server software is installed on either a Cisco Media Convergence Server (MCS), or on VMware ESXi running on top of Cisco Unified Computer Servers (UCS).  
* The Express Media Server (EMS) is co-resident with the Application Server.
* The Express Media Server (EMS) is co-resident with the Application Server.
*If your system has four or less Conferencing nodes, Meeting Director components can also be installed co-resident with the Application Server/EMS on the same MCS or UCS hardware.
*If your system has four or less Conferencing nodes, Meeting Director components can also be installed co-resident with the Application Server/EMS on the same MCS or UCS hardware.
Line 772: Line 1,293:
UCS C200 M2 or UCS-C200M2-VCD2  
UCS C200 M2 or UCS-C200M2-VCD2  
-
'''Note:''' This system is supported with Release 8.5.2 only and is less scalable.
+
'''Note:''' This system is supported with Release 8.5.2 and later and is less scalable.
|
|
Line 791: Line 1,312:
|-
|-
|
|
 +
 +
Cisco UCS C220 M3
 +
 +
|
 +
 +
Bare Metal 2xCPUs (as indicated below), 4x500GB HDD, 32GB RAM, 2 vSphere Enterprise Plus or Standard Edition
 +
 +
Note: RAM is configurable. However, we recommend that you have at least 8GB on a blade.
 +
 +
Supported CPU:
 +
* UCS-CPU-E5-2665 2.40 GHz E5-2665/115W 8C/20MB Cache/DDR3 1600MHz
 +
 +
|-
 +
|
 +
 +
Cisco UCS C240 M3
 +
|
 +
 +
Bare Metal 2xCPUs (as indicated below), 4x500GB HDD, 32GB RAM, 2 vSphere Enterprise Plus or Standard Edition
 +
 +
Note: RAM is configurable. However, we recommend that you have at least 8GB on a blade.
 +
 +
Supported CPU:
 +
* UCS-CPU-E5-2665 2.40 GHz E5-2665/115W 8C/20MB Cache/DDR3 1600MHz
 +
 +
 +
|-
 +
|
 +
 +
UCS B200 M2 or UCS-B200M2-VCS1
UCS B200 M2 or UCS-B200M2-VCS1
Line 805: Line 1,356:
*X5670 2.93 GHz
*X5670 2.93 GHz
*X5650 2.66 GHz
*X5650 2.66 GHz
-
*E5640 2.66 Ghz (Supported with Release 8.5.2 only)
+
*E5640 2.66 Ghz (Supported with Release 8.5.2 and later)
 +
 
 +
|-
 +
|
 +
 
 +
Cisco UCS B200 M3
 +
 
 +
|
 +
 
 +
2xCPUs (as indicated below), 2x500GB HDD, 32GB RAM, 2 vSphere Enterprise Plus or Standard Edition
 +
 
 +
Note: RAM is configurable. However, we recommend that you have at least 8GB on a blade.
 +
 
 +
Supported CPU:
 +
* UCS-CPU-E5-2665 2.40 GHz E5-2665/115W 8C/20MB Cache/DDR3 1600MHz
 +
 
|-
|-
Line 901: Line 1,467:
-
====Express Media Server and Secure Audio Conferencing in Release 8.5.2====
+
====Express Media Server and Secure Audio Conferencing in Release 8.5.2 and Later====
-
Release 8.5.2 supports secure audio conferencing (TLS/SRTP) in audio-only and MeetingPlace-scheduling deployments with the following restrictions:
+
Release 8.5.2 and later supports secure audio conferencing (TLS/SRTP) in audio-only and MeetingPlace-scheduling deployments with the following restrictions:
* TLS is supported on SIP interfaces. It is not supported on SCCP interfaces.
* TLS is supported on SIP interfaces. It is not supported on SCCP interfaces.
Line 912: Line 1,478:
-
'''Note:''' Secure audio conferencing is also supported on the Hardware Media Server (HMS) in both Release 8.5.1 and Release 8.5.2.
+
'''Note:''' Secure audio conferencing is also supported on the Hardware Media Server (HMS) in Release 8.5.1 and later.
== Hardware Media Server Requirements ==
== Hardware Media Server Requirements ==
Line 1,155: Line 1,721:
|
|
-
300
+
320
|
|
Line 1,163: Line 1,729:
-
'''Note: '''            In practice, some users may be restricted to scheduling Standard Rate video ports while others are able to schedule High Rate video ports. The total maximum system video capacity, therefore, is between 160 and 300 based on the maximum allowable hardware of eight Video Blades.
+
'''Note: '''            In practice, some users may be restricted to scheduling Standard Rate video ports while others are able to schedule High Rate video ports. The total maximum system video capacity, therefore, is between 160 and 320 based on the maximum allowable hardware of eight Video Blades.
-
 
+
==== Media Server Administration Pages ====
==== Media Server Administration Pages ====
Line 1,210: Line 1,775:
* In '''WebEx-scheduling deployments''', a maximum of four Cisco WebEx Nodes per system for a total of 2000 web sessions.
* In '''WebEx-scheduling deployments''', a maximum of four Cisco WebEx Nodes per system for a total of 2000 web sessions.
* In '''MeetingPlace-scheduling deployments''', a maximum of three Cisco WebEx Nodes per system for a total of 1500 web sessions using the HMS and 1200 web sessions using the EMS.
* In '''MeetingPlace-scheduling deployments''', a maximum of three Cisco WebEx Nodes per system for a total of 1500 web sessions using the HMS and 1200 web sessions using the EMS.
 +
* (Release 8.5 MR2 and later) In '''WebEx-scheduling deployments with a single node''', a maximum of two Cisco WebEx Nodes per system for a total of 1000 web sessions.
Line 1,229: Line 1,795:
Supports the following:
Supports the following:
* Cisco WebEx web meetings mixed for internal network users
* Cisco WebEx web meetings mixed for internal network users
-
* Cisco WebEx high-quality webcam video for internal network users  
+
* Cisco WebEx high-quality or high definition webcam video for internal network users  
* Release 8.5 supports an unlimited number of ASR 1000 routers for capacity.
* Release 8.5 supports an unlimited number of ASR 1000 routers for capacity.
 +
* ASR software version 3.6 supports the latest Webex version of software.
Line 1,283: Line 1,850:
*X5670 2.93 GHz
*X5670 2.93 GHz
*X5650 2.66 GHz
*X5650 2.66 GHz
-
*E5640 2.66 Ghz
+
*E5640 2.66 Ghz
|-
|-
Line 1,291: Line 1,858:
Cisco UCS C200 M2: Tested reference configuration 1:
Cisco UCS C200 M2: Tested reference configuration 1:
-
Cisco UCS C200 M2 General-Purpose Rack-Mount Server
+
* Cisco UCS C200 M2 General-Purpose Rack-Mount Server, Dual quad-core Intel 2.13-GHz Xeon E5506 processors, 24-GB RAM, Four 1-TB hard drives, Three motherboard built-in Ethernet ports (2 for network and 1 for Cisco UCS C-Series Integrated Management Controller)
-
Dual quad-core Intel 2.13-GHz Xeon E5506 processors
+
-
24-GB RAM
+
-
Four 1-TB hard drives
+
-
Three motherboard built-in Ethernet ports (2 for network and 1 for Cisco UCS C-Series Integrated Management Controller)
+
'''Note:''' RAM is configurable. However, we recommend that you have at least 8GB on a blade.
'''Note:''' RAM is configurable. However, we recommend that you have at least 8GB on a blade.
Line 1,315: Line 1,878:
*X5670 2.93 GHz
*X5670 2.93 GHz
*X5650 2.66 GHz
*X5650 2.66 GHz
-
*E5640  2.66 Ghz (Supported with Release 8.5.2 only)
+
*E5640  2.66 Ghz (Supported with Release 8.5.2 and later)
Line 1,367: Line 1,930:
|}
|}
-
 
-
 
Line 1,381: Line 1,942:
In Release 8.5.1, a Web Server is Cisco Unified MeetingPlace Web Server software that is installed on a Cisco Media Convergence Server (MCS).
In Release 8.5.1, a Web Server is Cisco Unified MeetingPlace Web Server software that is installed on a Cisco Media Convergence Server (MCS).
-
In Release 8.5.2, the Cisco Unified MeetingPlace Web Server is also supported on VMware ESX(i) 4.1 and later running on top of Cisco Unified Computer Servers (UCS).  
+
In Release 8.5.2 and later, the Cisco Unified MeetingPlace Web Server is also supported on VMware ESXi running on top of Cisco Unified Computer Servers (UCS).  
Line 1,437: Line 1,998:
UCS B200 M2
UCS B200 M2
|
|
-
1.0.0.2 (MPWinOS_VM_1002.iso)
+
1.0.0.3 (MPWinOS_VM_1003.iso)
-
'''Note:''' The MeetingPlace Windows OS is supported on virtualized Cisco UCS platforms in Release 8.5.2 only.  
+
'''Note:''' The MeetingPlace Windows OS is supported on virtualized Cisco UCS platforms in Release 8.5.2 and later.  
|}
|}
Line 1,449: Line 2,010:
* If you are reusing a Cisco MCS, you will have to rebuild it first with the MeetingPlace Windows OS before installing the Web Server Release 8.5 software.
* If you are reusing a Cisco MCS, you will have to rebuild it first with the MeetingPlace Windows OS before installing the Web Server Release 8.5 software.
* The Cisco Unified MeetingPlace Windows operating system is provided by Cisco and is the only supported operating system on the Web Server. Customer-provided operating systems are not supported.
* The Cisco Unified MeetingPlace Windows operating system is provided by Cisco and is the only supported operating system on the Web Server. Customer-provided operating systems are not supported.
-
 
+
* The Cisco UCS and Cisco MCS platforms listed in the preceding table have Windows security patches for the Cisco Unified MeetingPlace Windows OS for Release 8.5. Windows security updates for Cisco UCS are released on a monthly basis. Security patches for the Cisco MCS are released on a quarterly basis after the first patch in mid-October.
==== Hardware ====
==== Hardware ====
Cisco UCS, MCS or third-party equivalent as described in the following table.
Cisco UCS, MCS or third-party equivalent as described in the following table.
-
 
Line 1,476: Line 2,036:
*X5670 2.93 GHz
*X5670 2.93 GHz
*X5650 2.66 GHz
*X5650 2.66 GHz
-
*E5640 2.66 Ghz
+
*E5640 2.66 Ghz
|
|
-
Supported in Release 8.5.2 only
+
Supported in Release 8.5.2 and later
|-
|-
|
|
Line 1,494: Line 2,054:
*E5640 2.66 Ghz
*E5640 2.66 Ghz
|
|
-
Supported in Release 8.5.2 only
+
Supported in Release 8.5.2 and later
|-
|-
Line 1,514: Line 2,074:
*E5640 2.66 Ghz
*E5640 2.66 Ghz
|
|
-
Supported in Release 8.5.2 only
+
Supported in Release 8.5.2 and later
|-
|-
|
|
Line 1,597: Line 2,157:
* If you are using a Cisco Media Convergence Server, we recommend that you use a Cisco MCS 7845. Performance degradation will occur with the MCS 7835 due to its lower specifications.
* If you are using a Cisco Media Convergence Server, we recommend that you use a Cisco MCS 7845. Performance degradation will occur with the MCS 7835 due to its lower specifications.
-
 
Line 1,732: Line 2,291:
-
Video conferencing scales up to 600 video ports in a single system using an Express Media Server and supports a wide variety of endpoints from Cisco Unified video telephony to H.323/H.320 and SIP endpoints from third-party providers.  
+
Video conferencing scales up to 600 video ports in a single system using an Express Media Server and supports a wide variety of endpoints from Cisco Unified video telephony to H.323/SIP endpoints from third-party providers.  
-
[[Cisco Unified MeetingPlace Release 8.5 -- Planning to Install Your Cisco Unified MeetingPlace Release 8.5 System#Table: Audio and Video Scalability Numbers for Cisco Unified MeetingPlace|Table: Audio and Video Scalability Numbers for Cisco Unified MeetingPlace]] lists the maximum number of calls that are supported. The table assumes that the G.711 audio codec is being used and video is 320 Kbps. See [[Cisco Unified MeetingPlace Release 8.5 -- Planning the Capacity of your Cisco Unified MeetingPlace System#Planning the Capacity of your Cisco Unified MeetingPlace System|Planning the Capacity of your Cisco Unified MeetingPlace System]] for detailed information about System Resource Units (SRUs) that are used to calculate the capacity of the Express Media Server. The server listed is the server on which the Application Server resides.
+
[[Cisco Unified MeetingPlace Release 8.5 -- Planning to Install Your Cisco Unified MeetingPlace Release 8.5 System#Table: Audio and Video Scalability Numbers for Cisco Unified MeetingPlace|Table: Audio and Video Scalability Numbers for Cisco Unified MeetingPlace]] lists the maximum number of calls that are supported. The table assumes that the G.711 audio codec is being used and video is 320 Kbps. Many design external transcoding resources on DSP farms in Multiservice Routers to transcode G.722/G.729/iLBC codecs to G.711 before sending to MeetingPlace to achieve the G.711 codec capacities.  See [[Cisco Unified MeetingPlace Release 8.5 -- Planning the Capacity of your Cisco Unified MeetingPlace System#Planning the Capacity of your Cisco Unified MeetingPlace System|Planning the Capacity of your Cisco Unified MeetingPlace System]] for detailed information about System Resource Units (SRUs) that are used to calculate the capacity of the Express Media Server. The server listed is the server on which the Application Server resides.
Line 1,750: Line 2,309:
!Application Server hosted on Cisco MCS 7835-I3-RC1
!Application Server hosted on Cisco MCS 7835-I3-RC1
!Application Server hosted on Cisco MCS 7845-H2-RC2 or 7845-I2-RC2
!Application Server hosted on Cisco MCS 7845-H2-RC2 or 7845-I2-RC2
-
!Application Server hosted on Cisco MCS MCS-7845-I3-RC2
+
!Application Server hosted on Cisco MCS 7845-I3-RC2
!Application Server hosted on Cisco UCS B or C Series Server
!Application Server hosted on Cisco UCS B or C Series Server
|-
|-
Line 1,759: Line 2,318:
-
Audio: 2000 (G.711)  
+
Audio: 2000 (G.711) or 1328 (G.722/G.729/iLBC)
Video: 300 (160 at 2 MB or 300 at 384 Kbps)
Video: 300 (160 at 2 MB or 300 at 384 Kbps)
Line 1,765: Line 2,324:
-
Audio: 2000 (G.711)
+
Audio: 2000 (G.711) or 1328 (G.722/G.729/iLBC)
 +
 
Video: 300 (160 at 2 MB or 300 at 384 Kbps)
Video: 300 (160 at 2 MB or 300 at 384 Kbps)
|
|
-
Audio: 2000 (G.711)
+
Audio: 2000 (G.711) or 1328 (G.722/G.729/iLBC)
 +
 
Video: 300 (160 at 2 MB or 300 at 384 Kbps)
Video: 300 (160 at 2 MB or 300 at 384 Kbps)
|
|
-
Audio: 2000 (G.711)
+
Audio: 2000 (G.711) or 1328 (G.722/G.729/iLBC)
 +
 
Video: 300 (160 at 2 MB or 300 at 384 Kbps)
Video: 300 (160 at 2 MB or 300 at 384 Kbps)
Line 1,784: Line 2,346:
|
|
-
Audio only: 400 (G.711)
+
Audio only: 400 (G.711) or 66 in high quality mode (G.722/G.729)
Audio/Video:  
Audio/Video:  
Line 1,792: Line 2,354:
|
|
-
Audio only: 500 (G.711)
+
Audio only: 500 (G.711) or 83 in high quality mode (G.722/G.729)
 +
 
Audio/Video:  
Audio/Video:  
Line 1,800: Line 2,363:
|
|
-
Audio only: 1200 (G.711)
+
Audio only: 1200 (G.711) or 200 in high quality mode (G.722/G.729)
Audio/Video:  
Audio/Video:  
Line 1,808: Line 2,371:
|
|
-
Audio only: 1200 (G.711)
+
Audio only: 1200 (G.711)  or 200 in high quality mode (G.722/G.729)
Audio/Video:  
Audio/Video:  

Revision as of 08:28, 6 December 2012

Main page: Cisco Unified MeetingPlace Release 8.5

One page up: System Requirements

Print PDF: Cisco Unified MeetingPlace Release 8.5 -- Print System Requirements


This document provides information for all releases of Cisco Unified MeetingPlace Release 8.5, including the following:

  • Release 8.5.5 (also referred to as MR3)
  • Release 8.5.4 (also referred to as MR2)
  • Release 8.5.3 (also referred to as MR1)
  • Release 8.5.2
  • Release 8.5.1

Any release-specific information is indicated as such.


For deployment specific requirements, see the following:



Contents

Cisco Unified MeetingPlace 8.5 Hardware Specification for Cisco UCS Platforms

Notes:


Virtual Machine Requirements

  • VMware ESXi 5.0 and 5.0 Update 1 (Release 8.5.5 [8.5 MR3] only). The VMware Standard license is sufficient for the Cisco UCS C240 M3, the Cisco UCS C220 M3, the Cisco UCS C210 M2, the Cisco UCS C200 M2, the Cisco UCS B200 M3, and the UCS B200 M2. The VMware Enterprise Plus license is also supported.
  • VMware ESXi 4.1 running Enterprise Plus Edition VMware license for Cisco UCS C240 M3/C220 M3/C210 M2/B200 M3/B200 M2 and Standard or Enterprise Plus for Cisco UCS C200 M2.
  • Install one virtual machine, per blade on a supported Cisco Unified Computer Server (UCS)
  • LAN connection must support up to 1GB/s
  • Component-specific requirements are indicated in the following table:


Cisco Unified MeetingPlace Component Minimum Virtual Machine Requirements

Application Server/Express Media Server or combined Meeting Director/Application Server/Express Media Server (Less than 4 Audio node total allowed)

8 virtual CPU (2.4 GHz), 8GB RAM, 300GB hard drive (C240 M3/C220 M3/
C210 M2/B200 M3/B200 M2)

  • Enterprise Plus VMware 4.X
  • Standard or Enterprise Plus VMware 5.0 and 5.0 update 1 (Release 8.5.5 [8.5 MR3] only)

4 virtual CPU, 8GB RAM, 300GB hard drive, (C200 M2)

  • Standard or Enterprise Plus VMware 4.X
  • Standard or Enterprise Plus VMware 5.0 and 5.0 update 1 (Release 8.5.5 [8.5 MR3] only)

Meeting Director (Standalone for more than 4 Audio node deployment)

8 virtual CPU (2.4 GHz), 8GB RAM, 300GB hard drive (C240 M3/C220 M3/
C210 M2/B200 M3/B200 M2)

  • Enterprise Plus VMware 4.X
  • Standard or Enterprise Plus VMware 5.0 and 5.0 update 1 (Release 8.5.5 [8.5 MR3] only)

4 virtual CPU, 8GB RAM, 300GB hard drive, (C200 M2)

  • Standard or Enterprise Plus VMware 4.X
  • Standard or Enterprise Plus VMware 5.0 and 5.0 update 1 (Release 8.5.5 [8.5 MR3] only)

Cisco WebEx Node for MCS

8 virtual CPU (2.4 GHz), 8GB RAM, 300GB hard drive (C240 M3/C220 M3/
C210 M2/B200 M3/B200 M2)

  • Enterprise Plus VMware 4.X
  • Standard or Enterprise Plus VMware 5.0 and 5.0 update 1 (Release 8.5.5 [8.5 MR3] only)

4 virtual CPU, 8GB RAM, 300GB hard drive, (C200 M2)

  • Standard or Enterprise Plus VMware 4.X
  • Standard or Enterprise Plus VMware 5.0 and 5.0 update 1 (Release 8.5.5 [8.5 MR3] only)

MeetingPlace Web Server

4 virtual CPU (2.4 GHz), 4GB RAM, 300GB hard drive (C240 M3/C220 M3/
C210 M2/C200 M2/B200 M3/B200 M2)

  • Standard or Enterprise Plus VMware 4.X
  • Standard or Enterprise Plus VMware 5.0 and 5.0 update 1 (Release 8.5.5 [8.5 MR3] only)
  • MeetingPlace Web Server release 8.5.1 is NOT supported on UCS


Notes:

  • Cisco UCS does not support co-resident virtual machine (VM) images. This means that you cannot install a VM image of Cisco Unified MeetingPlace if you have a VM image of another application installed on the same physical server. Examples of other applications are Cisco Unified Communications Manager and Cisco Unity Connection.
  • You must install VMware Tools when installing Cisco Unified MeetingPlace on a virtual machine. Failing to install VMware Tools can lead to serious performance degradation of the system in certain circumstances.


For more information about the Enterprise Plus Edition VMware license, see http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1010839.

Supported Cisco UCS C Series Servers (General-purpose rack-mountable servers)

Note: Cisco UCS requires dedicated servers for each component of Cisco Unified MeetingPlace software.

Cisco UCS C220 M3
  • C220 M3 - UCS-CPU-E5-2665  2x8 cores @ 2.4 GHz, 4x8GB memory
C220 M3S (SFF) LSI 2008 RAID
Ordered Item Quantity Description

UCSC-C220-M3S

1

UCS C220 M3 SFF w/o CPU, mem, HD, PCIe, w/ rail kit

UCS-CPU-E5-2665

2

2.40 GHz E5-2665/115W 8C/20MB Cache/DDR3 1600MHz

UCS-MR-1X082RY-A

4

8GB DDR3-1600-MHz RDIMM/PC3-12800/dual rank/1.35v

A03-D500GC3

4

500GB 6Gb SATA 7.2K RPM SFF hot plug/drive sled mounted

UCSC-RAID-11-C220

1

LSI 2008 SAS RAID Mezzanine Card for UCS C220 server

N2XX-ACPCI01

1

Cisco UCS P81E Virtual Interface Card/ 2-port 10Gbps-6

UCSC-PSU-650W

2

650W power supply for C-series rack servers

UCSC-HS-C220M3

2

Auto-included: Heat Sink for UCS C220 M3 Rack Server-10 (Sub-component of UCS C220 M3 SFF w/o CPU, mem, HDD, PCIe, PSU, w/ rail kit)

UCSC-RAIL-2U

1

Auto-included: 2U Rail Kit for UCS C-Series server

N20-BBLKD

4

Auto-included: UCS 2.5 inch HDD blanking panel


C220 M3S (SFF) 9266-8i RAID
Ordered Item Quantity Description

UCSC-C220-M3S

1

UCS C220 M3 SFF w/o CPU, mem, HD, PCIe, w/ rail kit

UCS-CPU-E5-2665

2

2.40 GHz E5-2665/115W 8C/20MB Cache/DDR3 1600MHz

UCS-MR-1X082RY-A

4

8GB DDR3-1600-MHz RDIMM/PC3-12800/dual rank/1.35v

A03-D500GC3

4

500GB 6Gb SATA 7.2K RPM SFF hot plug/drive sled mounted

UCS-RAID-9266

1

MegaRAID 9266-8i + battery backup for C240 and C220-5

N2XX-ACPCI01

1

Cisco UCS P81E Virtual Interface Card/ 2-port 10Gbps-6

UCSC-PSU-650W

2

650W power supply for C-series rack servers

UCSC-HS-C220M3

2

Auto-included: Heat Sink for UCS C220 M3 Rack Server-10 (Sub-component of UCS C220 M3 SFF w/o CPU, mem, HDD, PCIe, PSU, w/ rail kit)

UCSC-RAIL-2U

1

Auto-included: 2U Rail Kit for UCS C-Series server

N20-BBLKD

4

Auto-included: UCS 2.5 inch HDD blanking panel

Cisco UCS C240 M3
  • C240 M3 - UCS-CPU-E5-2665 * *2x8 cores* *@ 2.4 GHz{*}*, 4x8GB memory
C240 M3S (SFF) 9266-8i RAID
Ordered Item Quantity Description

UCSC-C240-M3S2

1

UCS C240 M3 SFF w/o CPU, mem, HD, PCIe, w/ rail kit

UCS-CPU-E5-2665

2

2.40 GHz E5-2665/115W 8C/20MB Cache/DDR3 1600MHz

UCS-MR-1X082RY-A

4

8GB DDR3-1600-MHz RDIMM/PC3-12800/dual rank/1.35v

A03-D500GC3

4

500GB 6Gb SATA 7.2K RPM SFF hot plug/drive sled mounted

UCS-RAID-9266

1

MegaRAID 9266-8i + battery backup for C240 and C220-5

N2XX-ACPCI01

1

Cisco UCS P81E Virtual Interface Card/ 2-port 10Gbps-6

UCSC-PSU-650W

2

650W power supply for C-series rack servers

UCSC-HS-C240M3

2

Auto-included: Heat Sink for UCS C240 M3 Rack Server

UCSC-RAIL-2U

1

Auto-included: 2U Rail Kit for UCS C-Series servers

UCSC-SD-16G-C240

1

Auto-included: 16GB SD Card Module for C240 Servers

N20-BBLKD

20

Auto-included: UCS 2.5 inch HDD blanking panel

UCSC-PCIF-01F

3

Auto-included:Full height PCIe filler for C-Series



Cisco UCS C210 M2

The Cisco UCS C210 M2 is supported with all releases of Cisco Unified MeetingPlace Release 8.5.

The UCS-C210M2-VCD2 (TRC#1) is fully supported with VMware vSphere Enterprise Plus License (2 CPU), same capacity as bare metal configuration. http://docwiki.cisco.com/wiki/Unified_Computing_System_Hardware#Hardware_Requirements

OR

The following table describes a component level description of the Cisco UCS C210 M2 for bare metal UCS server specification. This configuration is validated as a supported platform for Cisco Unified MeetingPlace Release 8.5. This configuration also includes VMware vSphere Enterprise Plus License (2 CPU), and hardware and software support contracts.

  • 2xCPU
  • 6x300GB HD
  • 16GB RAM
  • vSphere Enterprise Edition Plus

Note: Periodically UCS SKUs may change. Make sure that you reference the description for the proper part and the following Data Sheet: http://www.cisco.com/en/US/products/ps10889/index.html.


Ordered Item Quantity Description

R210-2121605W

1

UCS C210 M2 Srvr w/1PSU, w/o CPU, mem, HDD, DVD or PCIe card

CAB-9K12A-NA

2

Power Cord, 125VAC 13A NEMA 5-15 Plug, North America

N20-AE0002

1

UCS M71KR-E Emulex Converged Network Adapter/PCIe/2port 10Gb

N01-M304GB1

4

4GB DDR3-1333MHz RDIMM/PC3-10600/dual rank 1Gb DRAMs

A03-D300GA2

6

300GB 6Gb SAS 10K RPM SFF HDD/hot plug/drive sled mounted

R210-ODVDRW

1

DVD-RW Drive for UCS C210 M1 Rack Servers

R200-TPM1

1

TPM Module for UCS C200 M1 and C210 M1 Rack Server

R210-SASXPAND

1

SAS Extender (servers requiring </= 8 HDDs) for UCS C210 M1

R2X0-PSU2-650W-SB

1

650W power supply, w/added 5A Standby for UCS C200 or C210

A01-X0105

2

2.66GHz Xeon X5650 95W CPU/12MB cache/DDR3 1333MHz

VMW-VS-ENTP-1A

2

VMware vSphere Enterprise Plus (1 CPU), 1yr support required

CON-ISV1-VSENTP1A

1

ISV 24X7 VMware vSphere EntPlus1CPU 1Yr RQD

R2XX-PL003

1

LSI 6G MegaRAID 9261-8i card (RAID 0,1,5,6,10,60) - 512WC

R2XX-LBBU

1

Battery Backup for the RAID controller (Highly recommended)

N20-BBLKD

10

HDD slot blanking panel for UCS B-Series Blade Servers

R200-PCIBLKF1

4

PCIe Full Height blanking panel for UCS C-Series Rack Server

SASCBLSHORT-003

2

Short SAS Cable for C210

R210-BHTS1

2

CPU heat sink for UCS C210 M1 Rack Server

R2X0-PSU2-650W-SB

1

650W power supply, w/added 5A Standby for UCS C200 or C210

CON-UCS7-R210W

1

UC SUPPORT 24X7X4OS UCSC210 M2Svr w/1PSU w/o CPU Mem HDD

R2XX-CMAG3-1032

1

Cable Mgmt Arm for R2XX-G31032RAIL for C200/C210

R2XX-G31032RAIL

1

G3 shorter stronger Rail Kit for UCS 200, 210 Rack Servers



Release 8.5 also supports the following CPUs for M2 models: X5670, (2.93GHz), X5650 (2.66GHz), E5640 (2.66GHz).

Cisco UCS C200 M2

The Cisco UCS C200 M2 is supported with Cisco Unified MeetingPlace Release 8.5.2 and later. This platform is supported with the following deployments:

UCS-C200M2-VCD2 (TRC#1) http://docwiki.cisco.com/wiki/Unified_Computing_System_Hardware#Hardware_Requirements

  • Audio-only in an active/standby deployment OR
  • WebEx-scheduling with two Meeting Directors/Application Server/Express Media Server with maximum of 2 nodes
    • Provides active/active redundancy for 500 ports using G.711 Codecs, less if G.729/G.722 is used (Bare metal spec with 1 CPU)
  • VMware vSphere Standard and VMware VSphere Advanced are both supported with this smaller configuration
  • VNWare vSphere Enterprise Plus will support 1000 G.711 Audio on the VCD2 hardware spec only, requires the 2 CPU VCD2 spec to achieve this capacity.

OR

Use the Netformx tool to complete the Cisco UCS C200 M2 bare metal series order configuration using the following specification:

  • 1xCPU
  • 4x300GB HD
  • 16GB RAM
  • 1 vSphere Standard or Advanced


Notes:

  • Periodically UCS SKUs may change. Make sure that you reference the description for the proper part and the following Data Sheet: http://www.cisco.com/en/US/products/ps10889/index.html.
  • Both VMware vSphere Standard and VMware vSphere Advanced are supported with the Cisco UCS C200 M2. However, Standard edition is not orderable through Cisco. Customers are responsible for providing their own VMware vSphere Standard edition.


Ordered Item Quantity Description

R200-1120402W

1

UCS C200 M2 Srvr w/1PSU, DVD w/o CPU, mem, HDD or PCIe card

R200-BHTS1

1

CPU heat sink for UCS C200 M1 Rack Server

R200-PCIBLKF1

1

PCIe Full Height blanking panel for UCS C-Series Rack Server

R200-SASCBL-001

1

Internal SAS Cable for a base UCS C200 M1 Server

R2X0-PSU2-650W-SB

1

650W power supply, w/added 5A Standby for UCS C200 or C210

R2XX-PSUBLKP

1

Power supply unit blnking pnl for UCS 200 M1 or 210 M1

A01-X0111

1

2.40GHz Xeon E5620 80W CPU/12MB cache/DDR3 1066MHz

CAB-9K12A-NA

1

Power Cord, 125VAC 13A NEMA 5-15 Plug, North America

N01-M304GB1

4

4GB DDR3-1333MHz RDIMM/PC3-10600/dual rank 1Gb DRAMs

R200-D300GB03

4

Gen 2 300GB SAS 15K RPM 3.5in HDD/hot plug/C200 drive sled

R200-PL004

1

LSI 6G MegaRAID 9260-4i card (RAID 0,1,5,6,10,60) - 512WC

R200-TPM1

1

TPM Module for UCS C200 M1 and C210 M1 Rack Server

R2XX-LBBU

1

Battery Back-up

VMW-VS-ADV-1A

1

VMware vSphere Advanced (1 CPU), 1yr support required

CON-ISV1-VSADV1A

1

ISV 24X7 VMware vSphere Adv 1 CPU 1 Yr RQD

CON-UCS7-R200W

1

UC SUPPORT 24X7X4OS UCSC200 M2Svr w/1PSU DVD w/o CPU Mem

Supported Cisco UCS B Series Servers (General-purpose blade servers)

Cisco UCS B200 M2

Release 8.5 supports the Cisco UCS B200 M2.

UCS-B200M2-VCS1 (TRC#1)with 2x vSphere Enterprise Edition Plus, same capacity as bare metal specification http://docwiki.cisco.com/wiki/Unified_Computing_System_Hardware#Hardware_Requirements


Notes:


Use the Netformx tool to complete your B series bare metal order configuration if desired. Here is a sample with one blade:

  • 2xCPU
  • 2x146GB HD
  • 16GB RAM
  • 2x vSphere Enterprise Edition Plus


Note: Periodically UCS SKUs may change. Make sure that you reference the description for the proper part and the above Data Sheet references.


Ordered Item Quantity Description

N20-C6508-UPG

1

UCS 5108 Blade Svr AC Chassis/0 PSU/8 fans/0 fabric extender

N20-B6625-1D

1

UCS B200 M2 Blade Server w/o CPU, memory, HDD, mezzanine

A01-X0100

2

3.33GHz Xeon X5680 130W CPU/12MB cache/DDR3 1333MHz

N01-M304GB1

4

4GB DDR3-1333MHz RDIMM/PC3-10600/dual rank 1Gb DRAMs

A03-D146GA2

2

146GB 6Gb SAS 10K RPM SFF HDD/hot plug/drive sled mounted

N20-AE0002

1

UCS M71KR-E Emulex Converged Network Adapter/PCIe/2port 10Gb

N20-BHTS1

2

CPU heat sink for UCS B200 Blade Server

N20-CAK

1

Access. kit for 5108 Blade Chassis incl Railkit, KVM dongle

N20-PAC5-2500W

2

2500W AC power supply unit for UCS 5108

CAB-C19-CBN

2

Cabinet Jumper Power Cord, 250 VAC 16A, C20-C19 Connectors

N20-CBLKB1

7

Blade slot blanking panel for UCS 5108/single slot

N20-CBLKP

2

Power supply unit blanking panel for UCS 5108

N20-FAN5

8

Fan module for UCS 5108

N01-UAC1

1

Single phase AC power module for UCS 5108

N20-CBLKI

1

Fabric extender slot blanking panel for UCS 5108

N20-I6584

1

UCS 2104XP Fabric Extender/4 external 10Gb ports


Notes:

  • The above configuration is based on 1 chassis and 1 blade. Additional interconnect, fabric extender, and other components are required for redundant configurations.
  • Release 8.5 also supports the following CPUs for M2 models: X5680 (3.33GHz), X5670 (2.93GHz), X5650 (2.66GHz), and E5640 (2.66GHz). The E5640 is supported with Release 8.5.2 and later.
  • VMware vSphere Enterprise Plus license is not included in the specifications above.
  • Cisco product and service contracts are not included in the specifications above.
  • Additional network equipment (i.e., Nexus switch) and accessories (i.e., 10Gb SFP + Cables) are not included in the specifications above.


Cisco UCS B200 M3
  • B200 M3 - UCS-CPU-E5-2665 * *2x8 cores* *@ 2.4 GHz{*}*, 4x8GB memory


B200 M3 Blade WITH 8 slot UCS chassis
Ordered Item Quantity Description

N20-B6625-1-UPG

1

UCS 5108 Blade Svr AC Chassis/0 PSU/8 fans/0 fabric extender-1

UCSB-B200-M3-D

1

UCS B200 M3 Blade Server w/o CPU, mem, HDD, mLOM/mezz

UCS-CPU-E5-2665

2

2.40 GHz E5-2665/115W 8C/20MB Cache/DDR3 1600MHz

UCS-MR-1X082RY-A

4

8GB DDR3-1600-MHz RDIMM/PC3-12800/dual rank/1.35v

A03-D500GC3

4

500GB 6Gb SATA 7.2K RPM SFF hot plug/drive sled mounted

UCSB-MLOM-40G-01

1

Cisco UCS VIC 1240 modular LOM for M3 blade servers

N20-I6584

2

UCS 2104XP Fabric Extender/4 external 10Gb ports-12

N20-FW010

1

UCS 5108 Blade Server Chassis FW package

N01-UAC1

1

Single phase AC power module for UCS 5108-18

UCSB-PSU-2500ACPL

2

2500W Platinum AC Hot Plug Power Supply for UCS 5108 Chassis

UCSB-HS-01-EP

2

Auto-included: Heat Sink for UCS B200 M3 server-16

N20-CAK

1

Auto-included: Access. kit for 5108 Blade Chassis incl Railkit, KVM dongle-19

N20-CBLKB1

6

Auto-included: Blade slot blanking panel for UCS 5108/single slot-20

N20-CBLKP

2

Auto-included: Power supply unit blanking panel for UCS 5108-21

N20-FAN5

8

Fan module for UCS 5108-22


B200M3 BLADE ONLY (requires UCS 8 slot chassis, UCS Manager SW, Fiber interconnect & Nexus switch)
Ordered Item Quantity Description

UCSB-B200-M3-U

1

UCS B200 M3 Blade Server w/o CPU, mem, HDD, mLOM/mezz (UPG)-1

UCS-CPU-E5-2665

2

2.40 GHz E5-2665/115W 8C/20MB Cache/DDR3 1600MHz-2 (Sub-component of UCS B200 M3 Blade Server w/o CPU, mem, HDD, mLOM/mezz (UPG))

UCS-MR-1X082RY-A

4

8GB DDR3-1600-MHz RDIMM/PC3-12800/dual rank/1.35v-3 (Sub-component of UCS B200 M3 Blade Server w/o CPU, mem, HDD, mLOM/mezz (UPG))

A03-D500GC3

2

500GB 6Gb SATA 7.2K RPM SFF hot plug/drive sled mounted-4 (Sub-component of UCS B200 M3 Blade Server w/o CPU, mem, HDD, mLOM/mezz (UPG))

UCSB-MLOM-40G-01

1

Cisco UCS VIC 1240 modular LOM for M3 blade servers

UCSB-HS-01-EP

2

Heat Sink for UCS Blade Servers (EP Socket R)-6 (Sub-component of UCS B200 M3 Blade Server w/o CPU, mem, HDD, mLOM/mezz (UPG))



B Series Blade Specification

A Cisco UCS B-series chassis can host eight blades. Blades can be ordered separately. VMWare ESXi Enterprise Edition is included here.

Following is a sample configuration:


Ordered Item Quantity Description

N20-B6625-1-UPG

1

UCS B200 M2 Blade Server w/o CPU, memory, HDD, mezzanine

A03-D146GA2

2

146GB 6Gb SAS 10K RPM SFF HDD/hot plug/drive sled mounted

N20-AE0002

1

UCS M71KR-E Emulex Converged Network Adapter/PCIe/2port 10Gb

A01-X0100

2

3.33GHz Xeon X5680 130W CPU/12MB cache/DDR3 1333MHz

N20-BHTS1

2

CPU heat sink for UCS B200 Blade Server

VMW-VS-ENTP-1A

2

VMware vSphere Enterprise Plus (1 CPU), 1yr support required

CON-ISV1-VSENTP1A

1

ISV 24X7 VMware vSphere EntPlus1CPU 1Yr RQD

N01-M304GB1

4

4GB DDR3-1333MHz RDIMM/PC3-10600/dual rank 1Gb DRAMs

CON-UCS7-B66251U

1

UC SUPPORT 24X7X4OS UCSB200 M2 Blade Svr w/o CPU Mem HDD Mez



B-Series SAN Specifications

Release 8.5 supports EMC Clarion CX4-120 or better SAN storage systems. SAN recommendations are:

  • 300GB HD space allocated for each image
  • 4GB FC link between SAN system and switch
  • 10K RPM or faster SAS hard drives
  • RAID 5 with 5-8 spindles (hard drives)
  • Logical Unit Number (LUN) running on separate controllers and ports.
  • Minimum LUN performance specifications are:
    • Throughput - I/O Operations per Second (IOPS): >1000
    • Latency: <10ms
    • Bandwidth: >50MBps



Application Server Requirements

Cisco Unified MeetingPlace Application Server software is installed on either a Cisco Media Convergence Server (MCS), or on VMware ESXi running on top of Cisco Unified Computer Servers (UCS).

  • The Express Media Server (EMS) is co-resident with the Application Server.
  • If your system has four or less Conferencing nodes, Meeting Director components can also be installed co-resident with the Application Server/EMS on the same MCS or UCS hardware.


Notes:


Hardware

Release 8.5 supports the following hardware for installing the Cisco Unified MeetingPlace Application Server.

  • Cisco UCS C series as described in the following table for bare metal data center SKUs or UCS-C210M2-VCD2(TRC #1) or UCS-C200M2-VCD2 for smaller capacity customer systems (max of two servers only)

http://docwiki.cisco.com/wiki/Unified_Computing_System_Hardware#Hardware_Requirements

  • Cisco UCS B200 M2 as described in the following table for bare metal data center SKUs or UCS-B200M2-VCS1(TRC #1)

http://docwiki.cisco.com/wiki/Unified_Computing_System_Hardware#Hardware_Requirements

  • Cisco MCS-7845, MCS-7835 or third-party equivalent as described in the following table


Notes:

  • VMware is the only supported environment for Cisco UCS. A physical installation without VMware is not supported. For more information, see Virtual Machine Requirements.
  • If you are using a Cisco Media Convergence Server, we recommend that you use a Cisco MCS 7845. Performance degradation will occur on the Cisco MCS 7835 due to its lower specifications.
  • Cisco MCS 7835-I3 and 7845-I3 require a firmware update before use. For more information, see the "Updating the Firmware on a Cisco MCS 7835-I3 or 7845-I3" section of the see the Installation, Upgrade, and Migration Guide for Cisco Unified MeetingPlace Release 8.5 at http://www.cisco.com/en/US/products/sw/ps5664/ps5669/prod_installation_guides_list.html.


Cisco Server Description

UCS C210 M2 or UCS-C210M2-VCD2


Bare Metal 2xCPUs (as indicated below), 6x300GB HDD, 16GB RAM, 2 vSphere Enterprise Edition Plus

Note: RAM is configurable. However, we recommend that you have at least 8GB on a blade.


Supported CPUs:

  • X5670 2.93 GHz
  • X5650 2.66 GHz
  • E5640 2.66 Ghz

UCS C200 M2 or UCS-C200M2-VCD2

Note: This system is supported with Release 8.5.2 and later and is less scalable.

UCS C200 M2: Bare Metal 1xCPU (as indicated below), 4x300GB HDD, 16GB RAM, 1 vSphere Standard or Advanced Edition


Supported CPUs:

  • X5670 2.93 GHz
  • X5650 2.66 GHz
  • E5640 2.66 Ghz
  • E5620 2.4 GHz
  • E5506 2.13 GHz(2xE5506 2.13GHz CPU,24GB RAM,4x1TB HDD)


UCS-C200M2-VCD2: 2xE5506 2.13GHz CPUs, 4x1TB HDD, 24GB RAM, VMware Enterprise Plus edition

Cisco UCS C220 M3

Bare Metal 2xCPUs (as indicated below), 4x500GB HDD, 32GB RAM, 2 vSphere Enterprise Plus or Standard Edition

Note: RAM is configurable. However, we recommend that you have at least 8GB on a blade.

Supported CPU:

  • UCS-CPU-E5-2665 2.40 GHz E5-2665/115W 8C/20MB Cache/DDR3 1600MHz

Cisco UCS C240 M3

Bare Metal 2xCPUs (as indicated below), 4x500GB HDD, 32GB RAM, 2 vSphere Enterprise Plus or Standard Edition

Note: RAM is configurable. However, we recommend that you have at least 8GB on a blade.

Supported CPU:

  • UCS-CPU-E5-2665 2.40 GHz E5-2665/115W 8C/20MB Cache/DDR3 1600MHz



UCS B200 M2 or UCS-B200M2-VCS1

2xCPUs (as indicated below), 2x146GB HDD, 16GB RAM, 2 vSphere Enterprise Edition Plus

Note: RAM is configurable. However, we recommend that you have at least 8GB on a blade.


Supported CPUs:

  • X5680 3.33 GHz
  • X5670 2.93 GHz
  • X5650 2.66 GHz
  • E5640 2.66 Ghz (Supported with Release 8.5.2 and later)

Cisco UCS B200 M3

2xCPUs (as indicated below), 2x500GB HDD, 32GB RAM, 2 vSphere Enterprise Plus or Standard Edition

Note: RAM is configurable. However, we recommend that you have at least 8GB on a blade.

Supported CPU:

  • UCS-CPU-E5-2665 2.40 GHz E5-2665/115W 8C/20MB Cache/DDR3 1600MHz


MCS 7845-I3-RC2

Dual Intel E5540 2.53 GHz, 4x300 HDD, 8GB RAM


HP equivalent: DL380-G6 Server, part number AX693A

MCS 7845-I2-RC2 (end-of-sale 12/09)

Dual Intel 5140 2.33 GHz, 4x146GB HDD, 4GB RAM

MCS 7845-H2-RC2 (end-of-sale 7/09)

Dual Intel 5140 2.33 GHz, 4X146 GB HDD, 4GB RAM


HP equivalent: DL380-G5 Server, part number 470064-887

MCS 7835-I3-RC1

Single Intel 5504 Quad-core 2.00 GHz, 2x146 HDD, 4GB RAM

HP equivalent: DL380-G6 Server, part number AX690A

Note: The MCS 7835-I3-RC1 does not support multinode deployments.



IMPORTANT: The DL380-G6 Server (AX690A, AX693A) is shipped with an internal USB Drive. The drive conflicts with the Cisco Unified MeetingPlace Linux OS and causes an illegal opcode error. The workaround is to remove the USB Drive from the system.


For additional information about supported IBM server equivalents, see: http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/ps5748/ps378/product_solution_overview0900aecd80091615.html.

For additional information about Cisco UCS specifications, see Cisco Unified MeetingPlace 8.5 Hardware Specification for Cisco UCS Platforms.

Express Media Server Requirements

The Express Media Server (EMS) is a set of software modules that reside on the Application Server.


Notes:

  • During installation, you will have the option to choose between the Hardware Media Server and Express Media Server. You canot enable both EMS and HMS on an Application Server.


Audio Codecs

  • G.711, G.729, G.722


Video Codecs

  • H.264 AVC
    • Video-mode setting: per user profile configuration
    • Levels available: Mobile, Compatibility, High Quality, High Definition at 720p
  • H.263
    • Video-mode setting: per user profile configuration
  • Standard Definition (SD) quality
    • Decode: QCIF, CIF, 4CIF, QSIF, SIF, 4SIF, VGA, 480p, 640 x 360 (quarter 720p) and 320 * 180 (one-eight 720p)
    • Encode: QCIF, CIF, and VGA
  • High Definition (HD) quality
    • Encode/Decode: 720p (16:9 Widescreen Aspect Ratio)


Note: If you are deploying the Express Media Server you are responsible for providing adequate echo cancellation in your voice gateways. For calls within a single continent, we recommend a minimum of 64ms of echo cancellation in all voice gateways that are connected to the PSTN. For calls between North America, Europe, and Japan, we recommend 128ms. If you are unable to provide this protection in voice gateways, or if you are taking intercontinental calls across satellite links or from outside North America, Europe, and Japan we recommend that you consider deploying the hardware media server instead, which has a built-in echo cancellation capability.


Express Media Server and Secure Audio Conferencing in Release 8.5.2 and Later

Release 8.5.2 and later supports secure audio conferencing (TLS/SRTP) in audio-only and MeetingPlace-scheduling deployments with the following restrictions:

  • TLS is supported on SIP interfaces. It is not supported on SCCP interfaces.
  • SRTP is supported on audio streams only. It is not supported for video streams.
  • The system supports a maximum of 249 ports when it is configured in secure conferencing mode.
  • Secure audio conferencing is not supported on the Cisco UCS C200 M2.


Note: Secure audio conferencing is also supported on the Hardware Media Server (HMS) in Release 8.5.1 and later.

Hardware Media Server Requirements

The Cisco Unified Hardware Media Server (HMS) is comprised of a set of Audio Blades and/or Video Blades.

  • Each Hardware Media Server supports a maximum of four Blades.
  • You can mix and match Hardware Media Servers.

For example, if you deployed a Cisco Unified MeetingPlace solution using a Cisco Unified MeetingPlace 3515 Media Server, you could add more video ports to the solution by adding a Cisco Unified MeetingPlace 3545 Media Server chassis plus a Cisco Unified MeetingPlace 3545 Media Server Video Blade.

The Hardware Media Server supports the escalation of audio calls to video if the endpoint is video-enabled.


Notes:


Hardware

Cisco Unified MeetingPlace 3515 or 3545 Media Server

  • The 3515 Media Server is delivered with a predetermined number of ports.
  • The 3545 Media Server can be configured to support a wide range of audio and/or video ports.


Audio Blade

Cisco Unified MeetingPlace Release 8.5 supports a maximum of eight Audio Blades. Each Audio Blade must be configured with at least one Video Blade. In other words, if your system is configured with eight Audio Blades, you must also purchase eight Video Blades so that each Audio Blade has an associated Video Blade.

Maximum system audio capacity is dependent on your deployment type, the global audio mode of your Cisco Unified MeetingPlace system, and whether or not you have secure audio conferencing (TLS/SRTP) enabled. If you have a MeetingPlace-scheduling or audio-only deployment with secure audio conferencing enabled, the system is limited to 249 audio ports.


Number of Audio Blades Number of Supported Audio Ports in 250 Ports/Blade Mode Number of Supported Audio Ports in 166 Ports/Blade Mode Number of Supported Audio Ports in TLS/SRTP Mode in a MeetingPlace-Scheduling/Audio-Only Deployment

1

250

166

120

2

500

332

200

3

750

498

249

4

1000

664

249

5

1250

830

249

6

1500

996

249

7

1750

1162

249

8

2000

1328

249


In other words:

  • If the global audio mode is set to G.711, G.729 without LEC, the system supports 250 ports per blade for a maximum of 2000 audio ports per node.
  • If the global audio mode is set to G.711, G.722, G.729, the system supports 166 ports per blade for a maximum of 1328 audio ports per node.
  • If you have secure audio conferencing enabled (TLS/SRTP) in a MeetingPlace-scheduling or audio-only deployment, there is a system maximum of 249 audio ports.


Notes:

  • Secure audio conferencing is not supported in WebEx-scheduling deployments.
  • Configuration of G.729 with or without LEC occurs on the Call Configuration > Media Parameters page of the Cisco Unified MeetingPlace Administration Center.


Video Blade

Cisco Unified MeetingPlace Release 8.5 supports a maximum of eight Video Blades. Maximum system video capacity is dependent on whether hardware video resources are scheduled as High Rate video ports or Standard Rate video ports. High Rate/Standard Rate is configured in the user profile.


Number of Video Blades Number of Supported Standard Rate Video Ports Number of Supported High Rate Video Ports

1

40

20

2

80

40

3

120

60

4

160

80

5

200

100

6

240

120

7

280

140

8

320

160


Note: In practice, some users may be restricted to scheduling Standard Rate video ports while others are able to schedule High Rate video ports. The total maximum system video capacity, therefore, is between 160 and 320 based on the maximum allowable hardware of eight Video Blades.

Media Server Administration Pages

The following browsers are supported for configuring the Media Server Administration pages:

  • Microsoft Windows
    • Internet Explorer 6, 7, or 8 (recommended)
    • Mozilla Firefox 3.5.7
  • Apple Mac
    • Internet Explorer 6, 7, or 8 (recommended)
    • Mozilla Firefox 3.5.7


Related Information

For information about physically installing and configuring the Hardware Media Server, see the Installation, Upgrade, and Migration Guide for Cisco Unified MeetingPlace Release 8.5 at http://www.cisco.com/en/US/products/sw/ps5664/ps5669/prod_installation_guides_list.html

Cisco WebEx Node for MCS Requirements

The primary purpose of the Cisco WebEx Node is to receive conferencing data from meeting presenters and distribute it to other meeting participants. Cisco WebEx Nodes are used by internal network connections for web meetings only. They do not provide any audio/video mixing.


Notes:


This release of Cisco Unified MeetingPlace supports the following variations of the Cisco WebEx Node:


Component Description

Cisco WebEx Node for MCS

Cisco WebEx Node is deployed on Cisco Media Convergence Servers (MCS) or for Virtual Machines (VM) on Cisco Unified Computing Servers (UCS).

Supports the following:

  • Cisco WebEx web meetings mixed for internal network users.
  • In WebEx-scheduling deployments, a maximum of four Cisco WebEx Nodes per system for a total of 2000 web sessions.
  • In MeetingPlace-scheduling deployments, a maximum of three Cisco WebEx Nodes per system for a total of 1500 web sessions using the HMS and 1200 web sessions using the EMS.
  • (Release 8.5 MR2 and later) In WebEx-scheduling deployments with a single node, a maximum of two Cisco WebEx Nodes per system for a total of 1000 web sessions.


Notes:

  • Ports on the Cisco WebEx Node are not hot failover ports. If one of the Cisco WebEx Nodes go down, you will lose all of its port capacity (500 ports). We recommend that you have at least one Cisco WebEx Node on standby at all times.
  • Cisco WebEx Node for MCS does not support recordings or WebEx webcam video for internal meeting types.


For more information about the Cisco WebEx Node for MCS, see http://www.cisco.com/en/US/products/ps10728/index.html.

For system capacity information, see System Capacity Quick Reference Tables.

Cisco WebEx Node for ASR

Cisco WebEx Node is deployed as a shared port adapter for the Cisco ASR 1000 series router.

Supports the following:

  • Cisco WebEx web meetings mixed for internal network users
  • Cisco WebEx high-quality or high definition webcam video for internal network users
  • Release 8.5 supports an unlimited number of ASR 1000 routers for capacity.
  • ASR software version 3.6 supports the latest Webex version of software.


For more information about the Cisco WebEx Node for ASR, see http://www.cisco.com/en/US/products/ps10353/index.html.



Operating System

Cisco Unified MeetingPlace Linux OS (installed with the Cisco WebEx Node software)


Supported Hardware

One of the following:

  • Cisco UCS C210 M2
  • Cisco UCS C200 M2
  • Cisco UCS B200 M2
  • Cisco MCS 7845, MCS 7835 or third-party equivalent per node as described in the following table
  • Cisco ASR 1000 router


Notes:

  • VMware is the only supported environment for Cisco UCS. A physical installation without VMware is not supported. For more information, see Virtual Machine Requirements.
  • If you are using a Cisco Media Convergence Server, we recommend that you use a Cisco MCS 7845. Performance degradation will occur on the Cisco MCS 7835 due to its lower specifications.
  • Cisco MCS 7835-I3 and 7845-I3 require a firmware update before use. For more information, see the "Updating the Firmware on a Cisco MCS 7835-I3 or 7845-I3" section of the Installation, Upgrade, and Migration Guide for Cisco Unified MeetingPlace Release 8.5 at http://www.cisco.com/en/US/products/sw/ps5664/ps5669/prod_installation_guides_list.html.



Cisco Server Version Description

UCS C210 M2

Bare Metal 2xCPUs (as indicated below), 6x300GB HDD, 16GB RAM, 2 vSphere Enterprise Edition Plus

Note: RAM is configurable. However, we recommend that you have at least 8GB on a blade.


Supported CPUs:

  • X5670 2.93 GHz
  • X5650 2.66 GHz
  • E5640 2.66 Ghz

UCS C200 M2

Cisco UCS C200 M2: Tested reference configuration 1:

  • Cisco UCS C200 M2 General-Purpose Rack-Mount Server, Dual quad-core Intel 2.13-GHz Xeon E5506 processors, 24-GB RAM, Four 1-TB hard drives, Three motherboard built-in Ethernet ports (2 for network and 1 for Cisco UCS C-Series Integrated Management Controller)

Note: RAM is configurable. However, we recommend that you have at least 8GB on a blade.

UCS B200 M2

2xCPUs (as indicated below), 2x146GB HDD, 16GB RAM, 2 vSphere Enterprise Edition Plus

Note: RAM is configurable. However, we recommend that you have at least 8GB on a blade.


Supported CPUs:

  • X5680 3.33 GHz
  • X5670 2.93 GHz
  • X5650 2.66 GHz
  • E5640 2.66 Ghz (Supported with Release 8.5.2 and later)


MCS 7845-I3-RC2

Dual Intel E5540 2.53 GHz, 4x300 HDD, 8GB RAM


HP equivalent: DL380-G6 Server, part number AX693A

MCS 7845-I2-RC2 (end-of-sale 12/09)

Dual Intel 5140 2.33 GHz, 4x146GB HDD, 4GB RAM


Note: Supports a maximum of 250 sessions per server.

MCS 7845-H2-RC2 (end-of-sale 7/09)

Dual Intel 5140 2.33 GHz, 4X146 GB HDD, 4GB RAM


HP equivalent: DL380-G5 Server, part number 470064-887

MCS 7835-I3-RC1

Single Intel 5504 Quad-core 2.00 GHz, 2x146 HDD, 4 GB RAM


HP equivalent: DL380-G6 Server, part number AX690A

Cisco ASR 1000 router

For product information, see http://www.cisco.com/en/US/products/ps9343/index.html


For additional information about supported IBM server equivalents, see: http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/ps5748/ps378/product_solution_overview0900aecd80091615.html.

For virtual machine requirements, see Virtual Machine Requirements.

For additional information about Cisco UCS specifications, see Cisco Unified MeetingPlace 8.5 Hardware Specification for Cisco UCS Platforms.

Web Server Requirements

In Release 8.5.1, a Web Server is Cisco Unified MeetingPlace Web Server software that is installed on a Cisco Media Convergence Server (MCS).

In Release 8.5.2 and later, the Cisco Unified MeetingPlace Web Server is also supported on VMware ESXi running on top of Cisco Unified Computer Servers (UCS).


Notes:

  • A Cisco Unified MeetingPlace Web Server is only required with MeetingPlace-scheduling deployments. It is optional for audio-only deployments. WebEx-scheduling deployments do not require a Web Server. For more information about deployment options, see Planning Your Deployment.


Operating System

Cisco Platform Cisco Unified MeetingPlace Windows OS Version

7845-I3-RC2

7845-I3-RC1

7835-I3-RC1

5.0.0.3 (MPWinOS_I3_5003.iso)

7845-I2-RC2

7835-I2-RC2

4.1.0.3 (MPWinOS_I2_4103.iso)

7845-H2-RC2

4.1.0.2 (MPWinOS_H2_4102.iso)

UCS C210 M2

UCS C200 M2

UCS B200 M2

1.0.0.3 (MPWinOS_VM_1003.iso)

Note: The MeetingPlace Windows OS is supported on virtualized Cisco UCS platforms in Release 8.5.2 and later.


Notes:

  • MeetingPlace Windows OS DVD is shipped with the Cisco Unified MeetingPlace Web Server Release 8.5 software.
  • If you are reusing a Cisco MCS, you will have to rebuild it first with the MeetingPlace Windows OS before installing the Web Server Release 8.5 software.
  • The Cisco Unified MeetingPlace Windows operating system is provided by Cisco and is the only supported operating system on the Web Server. Customer-provided operating systems are not supported.
  • The Cisco UCS and Cisco MCS platforms listed in the preceding table have Windows security patches for the Cisco Unified MeetingPlace Windows OS for Release 8.5. Windows security updates for Cisco UCS are released on a monthly basis. Security patches for the Cisco MCS are released on a quarterly basis after the first patch in mid-October.

Hardware

Cisco UCS, MCS or third-party equivalent as described in the following table.


Cisco Server Description Notes

UCS C210 M2

Bare Metal 2xCPUs (as indicated below), 6x300GB HDD, 16GB RAM, 2 vSphere Enterprise Edition Plus

Note: RAM is configurable. However, we recommend that you have at least 8GB on a blade.


Supported CPUs:

  • X5670 2.93 GHz
  • X5650 2.66 GHz
  • E5640 2.66 Ghz

Supported in Release 8.5.2 and later

UCS C200 M2

Bare Metal 1xCPU (as indicated below), 4x300GB HDD, 16GB RAM, 1 vSphere Standard or Advanced Edition


Supported CPUs:

  • X5670 2.93 GHz
  • X5650 2.66 GHz
  • E5640 2.66 Ghz

Supported in Release 8.5.2 and later

UCS B200 M2

2xCPUs (as indicated below); 2x146GB HDD; 16GB RAM; 2 vSphere Enterprise Edition Plus

Note: RAM is configurable. However, we recommend that you have at least 8GB on a blade.


Supported CPUs:

  • X5680 3.33 GHz
  • X5670 2.93 GHz
  • X5650 2.66 GHz
  • E5640 2.66 Ghz

Supported in Release 8.5.2 and later


MCS 7845-I3-RC1

Single Intel 5540 Quad-core 2.53 GHz, 4x146HDD, 6GB RAM

--

MCS 7845-I3-RC2

Dual Intel E5540 2.53 GHz; 4x300 HDD, 8GB RAM

--

MCS 7845-I2-RC2 (end-of-sale 12/09)

Dual Intel 5140 2.33 GHz, 4x 146GB HDD, 4GB RAM

HP equivalent: DL380-G6 Server, part number AX693A

MCS 7845-H2-RC2 (end-of-sale 7/09)

Dual Intel 5140 2.33 GHz, 4X146 GB HDD, 4GB RAM

HP equivalent: DL380-G5 Server, part number 470064-887

MCS 7835-I3-RC1

Single Intel 5504 Quad-core 2.00 GHz, 2x146 HDD, 4 GB RAM

HP equivalent: DL380-G6 Server, part number AX690A


MCS 7835-I2-RC2 (end-of-sale 12/09)

Single Xeon 5140 2.33GHz Dual-Core, 2x146GB HDD, 2GB RAM, Requires +2GIG RAM (4 total)


--


For additional information about supported IBM server equivalents, see: http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/ps5748/ps378/product_solution_overview0900aecd80091615.html.


Notes:

  • Cisco MCS 7845-I3-RC1 does not support the Application Server or Cisco WebEx Node for MCS because it is a single-processor configuration. Dual-processors are required for MCS 7845 models that are used for the Application Server/Cisco WebEx Node for MCS.
  • Cisco MCS 7835-I2-RC2 must have at least 4GB of memory using the following memory module: MEM-7835-I2-2GB=
  • If you are using a Cisco Media Convergence Server, we recommend that you use a Cisco MCS 7845. Performance degradation will occur with the MCS 7835 due to its lower specifications.


Networking Requirements

  • If you are migrating to Cisco Unified MeetingPlace Release 8.5 from Release 8.0 and want to preserve recordings, you must configure the Web Server with two static IP addresses on the same subnet.
Two static IP addresses are not required for new installations of Cisco Unified MeetingPlace Release 8.5.
  • Cisco Unified MeetingPlace Web Servers must be connected to network switch ports that are configured for 100/1000 Mb full duplex.


Related Information


Segmented Meeting Access (SMA) Requirements

Cisco Unified MeetingPlace supports Segmented Meeting Access (SMA) deployments for external access.


Hardware

Two single Cisco Unified MeetingPlace Web Servers as described in the Web Server Requirements Hardware section:

  • One Web Server deployed inside the private corporate network functioning as internal Web Servers.
  • One Web Server deployed in a network segment, such as a DMZ, functioning as external Web Servers.


Software

Cisco Unified MeetingPlace Web Server Release 8.5

  • Installed on the internal web server with the "Internal (Full Access)" server location option.
  • Installed on the external web server with the "External (Limited Access)" server location option.


DNS Configuration

  • For segmented DNS, the same hostname must resolve to the internal Web Server on the internal DNS and resolve to the external Web Server on the external DNS.
  • The internal hostname and IP address is accessible only from the internal network.
  • The external hostname or IP address is accessible from both the internal network and the Internet.


Port Access

The following ports must be open between the DMZ and the internal network:

  • TCP ports 5003 and 5005 are open bidirectional between the Web Server and the Cisco Unified MeetingPlace Application Servers (active server and standby server, if one exists).
  • If you configured your network for reverse connection, where your Web Servers are configured with a Cisco Unified MeetingPlace hostname instead of an IP address, the Application Server can initiate a reverse connection to the Web Server in the DMZ when port 5003 inbound is blocked.


The following ports are open inbound from the Internet to the DMZ:

  • TCP Port 80
  • TCP Port 443 (if SSL is implemented)

The following ports are open outbound from the Web Server to Cisco WebEx:

  • TCP Port 443


Synchronized Globally Unique Identifiers (GUIDs)

The database of the internal Web Server and the database of the external Web Server must contain identical GUIDs.


Related Information

Cisco Unified IP Phone Requirements

See Audio Endpoint Compatibility.



Video Requirements

This release of Cisco Unified MeetingPlace supports the following video options:


Video Option Description Supported Deployments

WebEx webcam video

  • Cisco WebEx high-quality video supports webcam devices only and is mixed in the WebEx collaboration cloud via the WebEx client when users join a meeting
  • Optionally, Cisco Webex Node for ASR with Video SPA is deployed to mix high-quality video on-premises.
  • WebEx-scheduling
  • MeetingPlace-scheduling

MeetingPlace standards-based video

  • MeetingPlace video is standards-based video only (H.323/SIP/SCCP)
  • Displays the video conference on the video devices (not inside the video window of the web meeting room).
  • MeetingPlace standards-based video deployed on Express Media Server (EMS) will affect capacity based on the type of video used and bandwidth settings allowed to join. EMS video is “switched” video. It does not have transrating or transcoding capability.
  • Hardware Media Server (HMS) provides continuous presence and transrating and transcoding for standards-based video devices.
  • For the best user experience, EMS or HMS must be deployed regionally on all Conferencing nodes.
  • Audio-only
  • WebEx-scheduling
  • MeetingPlace-scheduling



Note: If you have a WebEx-scheduling or MeetingPlace-scheduling deployment, you must choose between the two video options. This release of Cisco Unified MeetingPlace does not support the use of both video options on the same system.


Scalability for Cisco Unified MeetingPlace Release 8.5

Cisco Unified MeetingPlace Release 8.5 is a SIP-based architecture that provides a rich-media voice, video, and web conferencing solution to large enterprises.


Scalability for Voice and Video Systems

Video conferencing scales up to 600 video ports in a single system using an Express Media Server and supports a wide variety of endpoints from Cisco Unified video telephony to H.323/SIP endpoints from third-party providers.

Table: Audio and Video Scalability Numbers for Cisco Unified MeetingPlace lists the maximum number of calls that are supported. The table assumes that the G.711 audio codec is being used and video is 320 Kbps. Many design external transcoding resources on DSP farms in Multiservice Routers to transcode G.722/G.729/iLBC codecs to G.711 before sending to MeetingPlace to achieve the G.711 codec capacities. See Planning the Capacity of your Cisco Unified MeetingPlace System for detailed information about System Resource Units (SRUs) that are used to calculate the capacity of the Express Media Server. The server listed is the server on which the Application Server resides.


Table: Audio and Video Scalability Numbers for Cisco Unified MeetingPlace
  Maximum Number of Calls that are Supported
System Mode Application Server hosted on Cisco MCS 7835-I3-RC1 Application Server hosted on Cisco MCS 7845-H2-RC2 or 7845-I2-RC2 Application Server hosted on Cisco MCS 7845-I3-RC2 Application Server hosted on Cisco UCS B or C Series Server

Hardware Media Server


Audio: 2000 (G.711) or 1328 (G.722/G.729/iLBC)

Video: 300 (160 at 2 MB or 300 at 384 Kbps)


Audio: 2000 (G.711) or 1328 (G.722/G.729/iLBC)


Video: 300 (160 at 2 MB or 300 at 384 Kbps)

Audio: 2000 (G.711) or 1328 (G.722/G.729/iLBC)


Video: 300 (160 at 2 MB or 300 at 384 Kbps)

Audio: 2000 (G.711) or 1328 (G.722/G.729/iLBC)


Video: 300 (160 at 2 MB or 300 at 384 Kbps)

Express Media Server in high-capacity mode

Audio only: 400 (G.711) or 66 in high quality mode (G.722/G.729)

Audio/Video:

  • 200 using H.264 AVC Level 1.1 video
  • 133 using H.263 or H.264 AVC Level 1.3 video
  • 57 using H.264 AVC Level 3.0 or H.264 AVC Level 3.1 video

Audio only: 500 (G.711) or 83 in high quality mode (G.722/G.729)


Audio/Video:

  • 250 using H.264 AVC Level 1.1 video
  • 166 using H.263 or H.264 AVC Level 1.3 video
  • 71 using H.264 AVC Level 3.0 or H.264 AVC Level 3.1 video

Audio only: 1200 (G.711) or 200 in high quality mode (G.722/G.729)

Audio/Video:

  • 600 using H.264 AVC Level 1.1 video
  • 400 using H.263 or H.264 AVC Level 1.3 video
  • 170 using H.264 AVC Level 3.0 or H.264 AVC Level 3.1 video

Audio only: 1200 (G.711) or 200 in high quality mode (G.722/G.729)

Audio/Video:

  • 600 using H.264 AVC Level 1.1 video
  • 400 using H.263 or H.264 AVC Level 1.3 video
  • 170 using H.264 AVC Level 3.0 or H.264 AVC Level 3.1 video

Scalability for Web Conferencing

Release 8.5 offers customers a maximum of 14,400 ports in a multinode system. Multinode systems provide resiliency by allowing conferences to be hosted on other nodes in the system when an overflow condition occurs on the node where the meeting would normally be scheduled.

Note: Multinode systems are web conferencing deployments with Cisco WebEx scheduling for meetings. A multinode deployment is not supported for deployments with MeetingPlace scheduling or for audio only deployments.

For details on building this type of deployment, see Planning a Multinode Deployment.

Determine the number of nodes by determining the number of people who will be attending meetings, then add backup capacity at each site. For details on determining capacity, see Planning the Capacity of your Cisco Unified MeetingPlace System.

You can optionally install a Cisco WebEx Node For MCS (on a MCS or on a virtual machine) that can accommodate up to 500 web sessions. You can add additional Cisco WebEx Node For MCS to increase the number of web meetings, up to a maximum of four, for a total of 2000 web sessions (overall, not in a single meeting), in multinode deployments with Cisco WebEx scheduling.

Note: The Cisco WebEx Node For MCS does not support recordings or WebEx webcam video for internal only meetings, in deployments with Cisco WebEx scheduling.

Rating: 4.2/5 (5 votes cast)

Personal tools