Cisco Unified MeetingPlace Release 8.5 -- Compatibility Matrix

From DocWiki

(Difference between revisions)
Jump to: navigation, search
(→Component Compatibility for Release 8.5.4)
(→Component Compatibility for Release 8.5.5)
Line 329: Line 329:
|}
|}
-
== Component Compatibility for Release 8.5.5 ==
+
== Component Compatibility for Release 8.5.3 ==
Line 335: Line 335:
-
The following table lists the components (and their release numbers) that are compatible with the Cisco Unified MeetingPlace Application Server Release 8.5.5.
+
The following table lists the components (and their release numbers) that are compatible with the Cisco Unified MeetingPlace Application Server Release 8.5.3.
 +
 
 +
 
Line 345: Line 347:
!Component Release Date
!Component Release Date
|-
|-
-
| colspan="1" rowspan="2"|8.5.5.2
+
| colspan="1" rowspan="2"|8.5.3.4
-
Released October 31, 2012
+
Released January 31, 2012
'''Note:''' The Express Media Server and Meeting Director are included with the Application Server and are therefore on the same version.
'''Note:''' The Express Media Server and Meeting Director are included with the Application Server and are therefore on the same version.
Line 387: Line 389:
|
|
-
8.5.5.2
+
8.5.3.4
|
|
-
October 31, 2012
+
January 31, 2012
|-
|-
|
|
Line 421: Line 423:
|
|
-
*CUCM 6.1(5), 7.0(2), 7.1(5), 8.0(1), 8.0(2), 8.0(3), 8.5(1), 8.6(1), 8.6(2), 9.0.1, ''9.1.1.20000-5 (previous 9.1 builds have LDAP issue)''
+
*CUCM 6.1(5), 7.0(2), 7.1(5), 8.0(1), 8.0(2), 8.0(3), 8.5(1), 8.6(1)  
*CUCM-SME 7.1(3), 8.0, 8.5
*CUCM-SME 7.1(3), 8.0, 8.5
Line 430: Line 432:
* Ad-hoc (SCCP) meetings are not supported with CUCM 8.5 per known bug issue on UC Manager.
* Ad-hoc (SCCP) meetings are not supported with CUCM 8.5 per known bug issue on UC Manager.
* For more information, see [[Cisco Unified MeetingPlace Release 8.5 -- Compatibility Matrix#Cisco Unified Communications Manager Compatibility|Cisco Unified Communications Manager Compatibility]]
* For more information, see [[Cisco Unified MeetingPlace Release 8.5 -- Compatibility Matrix#Cisco Unified Communications Manager Compatibility|Cisco Unified Communications Manager Compatibility]]
-
** CUCM 9.1 support is limited to SIP trunk integration only, customers using LDAP integration via CUCM must use 9.1.1.20000-5 build
+
 
|
|
-
Nov. 12, 2007 - 2012
+
Nov. 12, 2007 - July 21, 2011
Line 470: Line 472:
|
|
-
8.5.5.2
+
8.5.3.4
|
|
-
October 31, 2012
+
January 31, 2012
|-
|-
|
|
Line 480: Line 482:
|
|
-
8.5.5.2
+
8.5.3.4
|
|
-
October 31, 2012
+
January 31, 2012
|}
|}

Revision as of 18:51, 7 November 2013

Main page: Cisco Unified MeetingPlace Release 8.5

Print PDF: Cisco Unified MeetingPlace Release 8.5 -- Print Compatibility Matrix


This document provides information for all releases of Cisco Unified MeetingPlace Release 8.5 including the following:

  • Release 8.5.5 (also referred to as 8.5 MR3)
  • Release 8.5.4 (also referred to as 8.5 MR2)
  • Release 8.5.3 (also referred to as 8.5 MR1)
  • Release 8.5.2
  • Release 8.5.1

Note: Cisco Unified MeetingPlace Release 8.5 is not backwards compatible. All major components, such as the Application Server/Express Media Server, Hardware Media Server, Web Server, and Cisco WebEx Node for MCS, must be at Release 8.5.

Contents

Component Compatibility for Release 8.5.5

Note: For compatibility information for other Cisco Unified MeetingPlace releases, go to http://www.cisco.com/en/US/products/sw/ps5664/ps5669/products_device_support_tables_list.html.


The following table lists the components (and their release numbers) that are compatible with the Cisco Unified MeetingPlace Application Server Release 8.5.5.


Application Server Version Component Name Component Version Component Release Date
8.5.5.2

Released October 31, 2012

Note: The Express Media Server and Meeting Director are included with the Application Server and are therefore on the same version.

Audio Blade

6.5.0.6.0

May 31, 2011

Video Blade

5.3.3.0.54A

Mar. 26, 2010

Cisco WebEx Node for MCS

8.5.2.8

August 24, 2011

Web Server software

8.5.5.2

October 31, 2012

Web Server Operating System

One of the following versions of the Cisco Unified MeetingPlace Windows OS depending on your Cisco platform:

  • 5.0.0.3 (MPWinOS_I3_5003.iso)
  • 4.1.0.3 (MPWinOS_I2_4103.iso)
  • 4.1.0.2 (MPWinOS_H2_4102.iso)
  • 1.0.0.3 (MPWinOS_VM_1003.iso)


Notes:

  • The Cisco Unified MeetingPlace Windows OS depends on the version of your Cisco hardware. For more information, see Operating System.
  • Release 8.5 supports the Cisco-provided operating system only.

May 31, 2011

Notes:

  • MPWinOS_I3_5003.iso was released July 1, 2011.
  • MPWinOS_VM_1003.iso was released July 12, 2011.

Cisco Unified Communications Manager (CUCM)

  • CUCM 6.1(5), 7.0(2), 7.1(5), 8.0(1), 8.0(2), 8.0(3), 8.5(1), 8.6(1), 8.6(2), 9.0.1, 9.1.1.20000-5 (previous 9.1 builds have LDAP issue)
  • CUCM-SME 7.1(3), 8.0, 8.5


Notes:

  • MeetingPlace with sRTP enabled requires UC Manager 7.0 and above to support sRTP.
  • CUCM 8.0(3) supports SIP Refers for multinode Cisco Unified MeetingPlace systems. Open a case with Cisco TAC against the Cisco Unified Communications Manager to obtain the latest Engineering Special (ES) or Service Update (SU) version of CUCM 8.0(3).
  • Ad-hoc (SCCP) meetings are not supported with CUCM 8.5 per known bug issue on UC Manager.
  • For more information, see Cisco Unified Communications Manager Compatibility
    • CUCM 9.1 support is limited to SIP trunk integration only, customers using LDAP integration via CUCM must use 9.1.1.20000-5 build

Nov. 12, 2007 - 2012


Cisco Unified Operations Manager

8.6

August 2011


Cisco WebEx Business Suite (WBS)

WBS27 SP27 or later


Note: If your site is on a version earlier than SP25, contact your Cisco WebEx Customer Support Engineer (CSE) to request an upgrade to the minimum version required for use with Cisco Unified MeetingPlace Release 8.5.

June 4, 2011

Cisco Unified MeetingPlace for Microsoft Outlook

8.5.5.2

October 31, 2012

Cisco Unified MeetingPlace for IBM Lotus Notes

8.5.5.2

October 31, 2012

Component Compatibility for Release 8.5.4

Note: For compatibility information for other Cisco Unified MeetingPlace releases, go to http://www.cisco.com/en/US/products/sw/ps5664/ps5669/products_device_support_tables_list.html.


The following table lists the components (and their release numbers) that are compatible with the Cisco Unified MeetingPlace Application Server Release 8.5.4.


Application Server Version Component Name Component Version Component Release Date
8.5.4.12

Released June 15, 2012

Note: The Express Media Server and Meeting Director are included with the Application Server and are therefore on the same version.

Audio Blade

6.5.0.6.0

May 31, 2011

Video Blade

5.3.3.0.54A

Mar. 26, 2010

Cisco WebEx Node for MCS

8.5.2.8

August 24, 2011

Web Server software

8.5.4.12

June 15, 2012

Web Server Operating System

One of the following versions of the Cisco Unified MeetingPlace Windows OS depending on your Cisco platform:

  • 5.0.0.3 (MPWinOS_I3_5003.iso)
  • 4.1.0.3 (MPWinOS_I2_4103.iso)
  • 4.1.0.2 (MPWinOS_H2_4102.iso)
  • 1.0.0.3 (MPWinOS_VM_1003.iso)


Notes:

  • The Cisco Unified MeetingPlace Windows OS depends on the version of your Cisco hardware. For more information, see Operating System.
  • Release 8.5 supports the Cisco-provided operating system only.

May 31, 2011

Notes:

  • MPWinOS_I3_5003.iso was released July 1, 2011.
  • MPWinOS_VM_1003.iso was released July 12, 2011.

Cisco Unified Communications Manager (CUCM)

  • CUCM 6.1(5), 7.0(2), 7.1(5), 8.0(1), 8.0(2), 8.0(3), 8.5(1), 8.6(1), 9.0(1)
  • CUCM-SME 7.1(3), 8.0, 8.5


Notes:

  • MeetingPlace with sRTP enabled requires UC Manager 7.0 and above to support sRTP.
  • CUCM 8.0(3) supports SIP Refers for multinode Cisco Unified MeetingPlace systems. Open a case with Cisco TAC against the Cisco Unified Communications Manager to obtain the latest Engineering Special (ES) or Service Update (SU) version of CUCM 8.0(3).
  • Ad-hoc (SCCP) meetings are not supported with CUCM 8.5 per known bug issue on UC Manager.
  • For more information, see Cisco Unified Communications Manager Compatibility


Nov. 12, 2007 - July 21, 2011


Cisco Unified Operations Manager

8.6

August 2011


Cisco WebEx Business Suite (WBS)

WBS27 SP27 or later


Note: If your site is on a version earlier than SP25, contact your Cisco WebEx Customer Support Engineer (CSE) to request an upgrade to the minimum version required for use with Cisco Unified MeetingPlace Release 8.5.

June 4, 2011

Cisco Unified MeetingPlace for Microsoft Outlook

8.5.4.12

June 15, 2012

Cisco Unified MeetingPlace for IBM Lotus Notes

8.5.4.12

June 15, 2012

Component Compatibility for Release 8.5.3

Note: For compatibility information for other Cisco Unified MeetingPlace releases, go to http://www.cisco.com/en/US/products/sw/ps5664/ps5669/products_device_support_tables_list.html.


The following table lists the components (and their release numbers) that are compatible with the Cisco Unified MeetingPlace Application Server Release 8.5.3.



Application Server Version Component Name Component Version Component Release Date
8.5.3.4

Released January 31, 2012

Note: The Express Media Server and Meeting Director are included with the Application Server and are therefore on the same version.

Audio Blade

6.5.0.6.0

May 31, 2011

Video Blade

5.3.3.0.54A

Mar. 26, 2010

Cisco WebEx Node for MCS

8.5.2.8

August 24, 2011

Web Server software

8.5.3.4

January 31, 2012

Web Server Operating System

One of the following versions of the Cisco Unified MeetingPlace Windows OS depending on your Cisco platform:

  • 5.0.0.3 (MPWinOS_I3_5003.iso)
  • 4.1.0.3 (MPWinOS_I2_4103.iso)
  • 4.1.0.2 (MPWinOS_H2_4102.iso)
  • 1.0.0.3 (MPWinOS_VM_1003.iso)


Notes:

  • The Cisco Unified MeetingPlace Windows OS depends on the version of your Cisco hardware. For more information, see Operating System.
  • Release 8.5 supports the Cisco-provided operating system only.

May 31, 2011

Notes:

  • MPWinOS_I3_5003.iso was released July 1, 2011.
  • MPWinOS_VM_1003.iso was released July 12, 2011.

Cisco Unified Communications Manager (CUCM)

  • CUCM 6.1(5), 7.0(2), 7.1(5), 8.0(1), 8.0(2), 8.0(3), 8.5(1), 8.6(1)
  • CUCM-SME 7.1(3), 8.0, 8.5


Notes:

  • MeetingPlace with sRTP enabled requires UC Manager 7.0 and above to support sRTP.
  • CUCM 8.0(3) supports SIP Refers for multinode Cisco Unified MeetingPlace systems. Open a case with Cisco TAC against the Cisco Unified Communications Manager to obtain the latest Engineering Special (ES) or Service Update (SU) version of CUCM 8.0(3).
  • Ad-hoc (SCCP) meetings are not supported with CUCM 8.5 per known bug issue on UC Manager.
  • For more information, see Cisco Unified Communications Manager Compatibility


Nov. 12, 2007 - July 21, 2011


Cisco Unified Operations Manager

8.6

August 2011


Cisco WebEx Business Suite (WBS)

WBS27 SP27 or later


Note: If your site is on a version earlier than SP25, contact your Cisco WebEx Customer Support Engineer (CSE) to request an upgrade to the minimum version required for use with Cisco Unified MeetingPlace Release 8.5.

June 4, 2011

Cisco Unified MeetingPlace for Microsoft Outlook

8.5.3.4

January 31, 2012

Cisco Unified MeetingPlace for IBM Lotus Notes

8.5.3.4

January 31, 2012

Component Compatibility for Release 8.5.1

Note: For compatibility information for other Cisco Unified MeetingPlace releases, go to http://www.cisco.com/en/US/products/sw/ps5664/ps5669/products_device_support_tables_list.html.


The following table lists the components (and their release numbers) that are compatible with the Cisco Unified MeetingPlace Application Server Release 8.5.1.


Application Server Version Component Name Component Version Component Release Date
8.5.1.6

Released May 31, 2011

Note: The Express Media Server and Meeting Director are included with the Application Server and are therefore on the same version.

Audio Blade

6.5.0.6.0

May 31, 2011

Video Blade

5.3.3.0.54A

Mar. 26, 2010

Cisco WebEx Node for MCS

8.5.1.6

May 31, 2011

Web Server software

8.5.1.6

May 31, 2011

Web Server Operating System

One of the following versions of the Cisco Unified MeetingPlace Windows OS:

  • 5.0.0.3 (MPWinOS_I3_5003.iso)
  • 4.1.0.3 (MPWinOS_I2_4103.iso)
  • 4.1.0.2 (MPWinOS_H2_4102.iso)


Notes:

  • The Cisco Unified MeetingPlace Windows OS depends on the version of your Cisco MCS hardware. For more information, see Operating System.
  • Release 8.5 supports the Cisco-provided operating system only.

May 31, 2011

Note: MPWinOS_I3_5003.iso was released July 1, 2011.

Cisco Unified Communications Manager (CUCM)

  • CUCM 6.1(5), 7.0(2), 7.1(5), 8.0(1), 8.0(2), 8.0(3), 8.5(1)
  • CUCM-SME 7.1(3), 8.0, 8.5


Notes:

  • CUCM 8.0(3) supports SIP Refers for multinode Cisco Unified MeetingPlace systems. Open a case with Cisco TAC against the Cisco Unified Communications Manager to obtain the latest Engineering Special (ES) or Service Update (SU) version of CUCM 8.0(3).
  • For more information, see Cisco Unified Communications Manager Compatibility


Nov. 12, 2007 - July 21, 2011


Cisco Unified Operations Manager

8.5

Mar. 1, 2011


Cisco WebEx Business Suite (WBS)

WBS27 SP27 or later


Note: If your site is on a version earlier than SP25, contact your Cisco WebEx Customer Support Engineer (CSE) to request an upgrade to the minimum version required for use with Cisco Unified MeetingPlace Release 8.5.

June 4, 2011

Cisco Unified MeetingPlace for Microsoft Outlook

8.5.1.6

May 31, 2011

Cisco Unified MeetingPlace for IBM Lotus Notes

8.5.1.6

May 31, 2011

Cisco Unified Communications Manager Compatibility

Cisco Unified Communications Manager Version Supported with Cisco Unified MeetingPlace Release 8.5.1 Supported with Cisco Unified MeetingPlace Release 8.5.2 SIP Trunk Calls/Second Number of Audio/Video Server Nodes Supported Notes

6.1(5)

Y

Y

<17

1 node deployment only

Not supported in WebEx-scheduling deployments

7.0(2)

Y

Y

17.77

4 node deployment (requires WebEx front-end)

Lower scaleability with multinode, max of 8cps + 75% refers with 4 nodes, brings down ports per node to 800

7.1(5)

Y

Y

18.52

4 node deployment (requires WebEx front-end)

Lower scaleability with multinode, max of 8cps + 75% refers with 4 nodes, brings down ports per node to 800

8.0(1)

Y

Y

24.69

1 node deployment only

Not supported in WebEx-scheduling deployments

8.0(2)

Y

Y

24.69

1 node deployment only

Not supported in WebEx-scheduling deployments

8.0(3)

Y

Y

8

4 server deployment (requires WebEx front-end)

Supports 1000 ports per node. Verified 8cps incoming call rate with 75% call refer rate.

CUCM 8.0(3) supports SIP Refers for multinode Cisco Unified MeetingPlace systems. You must open a case with Cisco TAC against Cisco Unified Communications Manager to obtain the latest Engineering Special (ES) or Service Update (SU) version of CUCM 8.0(3).

8.5(1)

Y

Y

36

16 server deployment (requires WebEx front-end)

Supports 1200 ports per node

Total number of nodes includes 12 Conferencing nodes, two additional Conferencing nodes for resiliency, and two Meeting Directors

Not supported for ad-hoc meetings

8.5(1)

N

Y

36

16 server deployment (requires WebEx front-end)

Supports 1200 ports per node

Total number of nodes includes 12 Conferencing nodes, two additional Conferencing nodes for resiliency, and two Meeting Directors

8.5(2)

N

Supported in MR1&MR3 (MP8.5.3/MP8.5.4)

36

16 server deployment (requires WebEx front-end)

Supports 1200 ports per node

Total number of nodes includes 12 Conferencing nodes, two additional Conferencing nodes for resiliency, and two Meeting Directors

Audio Endpoint Compatibility

The following Cisco Unified IP Phones are supported in Release 8.5:

  • 7940 G and G-GE series (SCCP only)
    • Minimum firmware version 6.0(4.3), also called App Load ID P00306000403
  • 7941, 7942, and 7945
  • 7960 G and G-GE series (SCCP only)
    • Minimum firmware version 6.0(4.3), also called App Load ID P00306000403
  • 7961, 7962 and 7965
  • 7970 G series
  • 7971, 7975
  • 8961
  • 9951 and 9971
  • Cisco IP Communicator Release 1.1(5) or later


Note: For information about upgrading the firmware, see the Cisco Unified Communications Manager documentation.



Video Endpoint Compatibility

This section provides compatibility information between Cisco Unified MeetingPlace Release 8.5 and various video terminals when using Cisco Unified Communications Manager (CUCM).

All testing was performed with Cisco Unified MeetingPlace connected to Cisco Unified Communications Manager via SIP trunk.

  • Cisco Unified MeetingPlace Release 8.5.1 was tested with CUCM 8.5.
  • Cisco Unified MeetingPlace Release 8.5.2 was tested with CUCM 8.6.

For H.323 testing, the terminal was registered to a H.323 Gatekeeper, which was connected to Cisco Unified Communications Manager through an H.323 trunk. For SIP and SCCP, the terminal was registered directly to Cisco Unified Communications Manager.


Notes:

  • WebEx-scheduling deployments do not support Cisco Unified Communications Manager Release 8.0(1) and 8.0(2).
  • Endpoints with the following test results are likely to drop calls when transferring to a breakout session, initiating a #31 dial-out call, or exiting the meeting with #9:
    • Dial in-fail
    • Dial out-fail
    • Direct to meeting-OK or "-"
These video endpoints typically do not correctly support the required media transfer mechanism.
  • Transferring a Cisco Unified MeetingPlace call from a Cisco-brand phone to a third-party SIP video terminal is likely to result in an audio-only connection. This is due to differences in the way Cisco and third-party terminals negotiate transport of telephony events. The differences cause Cisco Unified Communications Manager to insert a media termination point (MTP) in the call. Unless a hardware MTP resource is available, this insertion will block the video stream.


Compatibility Test Results with the Hardware Media Server

Following are the test results for video endpoint compatibility when using Cisco Unified MeetingPlace Release 8.5 with a Hardware Media Server (HMS).


Notes:

  • The Hardware Media Server supplies Standard Definition video. High Definition video is not supported.
  • H.323 endpoints must be configured as video terminals in order to have video.


Manufacturer/Brand Model/Series Protocol Dial In Dial Out Direct to Meeting 4CIF Version Tested Notes

Cisco

Cius

SIP

OK

OK

OK

N

9-1-1CM-709

Tested with Cisco Unified MeetingPlace Release 8.5.2


Results are the same for both Standard Rate and High Rate

Cisco

Cisco Unified Personal Communicator (CUPC) 7.x

SIP

OK

OK

OK

N

(Release 8.5.2) 7.1(1.13893)


(Release 8.5.1) 7.1(1.13949)

-

Cisco

Cisco Unified Personal Communicator (CUPC) 8.x

SIP

OK

OK

OK

N

8.5.1.18395-6.2.9, CSF 8.5(3)-4.3.29

Tested with Cisco Unified MeetingPlace Release 8.5.2


Recommendation is to set "Show my video automatically"

Cisco

Cisco UC Integration for Microsoft Office Communicator

SIP

OK

OK

OK

N

CSF 8.5(1)-4.0.8

Tested with Release 8.5.1

Cisco

Cisco UC Integration for Microsoft Lync

SIP

OK

OK

OK

N

8.5(105.17095), CSF 8.5(1)-4.0.12

Tested with Release 8.5.2


Recommendation is to set "Show my video automatically"

Cisco

Cisco Unified Video Advantage and Cisco IP Communicator/79XX

SCCP

OK

OK

OK

N

2.2.1.7 and 7.0.5.0

Tested with both Release 8.5.1 and 8.5.2

Cisco

Cisco Unified Video Advantage and Cisco IP Phones 99xx

SIP

OK

OK

OK

N

(Release 8.5.2) 2.2.1.7 and sip9971.9-2-1


(Release 8.5.1) 2.2.1.7 and sip9971.9-1-1

-

Cisco

Cisco Unified IP Phone 6941

SIP

Audio only

Audio only

Audio only

N

sip69xx.9-1-1-3-sr.zz

Tested with Release 8.5.2


Results are the same for both Standard Rate and High Rate

Cisco

Cisco Unified IP Phone 6941

SCCP

Audio only

Audio only

Audio only

N

SCCP 9.2.1.0

Tested with Release 8.5.2

Cisco

Cisco Unified IP Phone 8941

SIP

OK

OK

OK

N

9.1.2(SCCP 9-1-2-00)

Tested with Release 8.5.2


Results are the same for both Standard Rate and High Rate

Cisco

Cisco Unified IP Phone 9951/9971

SIP

OK

OK

OK

N

(Release 8.5.2) sip99xx.9-2-1


(Release 8.5.1) sip9951.9-1-1

-

Cisco


Cisco TelePresence MXP 1700


H.323

OK

Audio only

OK

Y

F8.2 PAL

Tested with Release 8.5.1

SIP

OK

OK

OK

Y

F8.2 PAL

Tested with Release 8.5.1

Cisco


Cisco TelePresence MXP 1700


H.323

OK

OK

OK

Y

F9.0.2 PAL

Tested with Release 8.5.2

SIP

OK

OK

OK

Y

F9.0.2 PAL

Tested with Release 8.5.2

Cisco

Cisco IP Phone 7985

SCCP

OK

OK

OK

N

cmterm_7985.4-1-7-0

Tested with both Release 8.5.1 and 8.5.2

Cisco

Cisco IP Video Phone E20

SIP

OK

OK

OK

N

(Release 8.5.2) TE4.0.0RC5


(Release 8.5.1) TE4.0.0RC1

Results are the same for both Standard Rate and High Rate

Cisco

Cisco TelePresence System Quick Set C20

SIP

OK

OK

OK

N

TC5.0

Tested with Release 8.5.2


Results are the same for both Standard Rate and High Rate

Cisco

Cisco TelePresence System EX 90

SIP

OK

OK

OK

N

TC5.0

Tested with Release 8.5.2


Results are the same for both Standard Rate and High Rate

Cisco

Cisco TelePresence Movi

SIP

OK

OK

OK

N

4.1

Tested with Release 8.5.2


Results are the same for both Standard Rate and High Rate

Cisco

Cisco TelePresence System 1100

SIP

OK

OK

OK

N

CTS_1.7.4(256)_P1

Tested with Release 8.5.2


Results are the same for both Standard Rate and High Rate

Polycom


VSX 3000A


H.323

OK

OK

OK

Y

Release 9.0.6.1

Tested with Release 8.5.1

SIP

Fail

OK

OK

Y

Release 9.0.6.1

Tested with Release 8.5.1


Endpoint sends video quality class B (medium video quality)

Polycom


VSX 3000A


H.323

OK

OK

OK

Y

Release 9.0.6.1

Tested with Release 8.5.2

SIP

Fail

Fail

Audio only

Y

Release 9.0.6.1

Tested with Release 8.5.2


Endpoint sends video quality class B (medium video quality)

LifeSize


Passport

H.323

OK

Audio only

OK

Y

LS_PP1_4.7.0(19)

Tested with Release 8.5.1

SIP

OK

OK

OK

Y

LS_PP1_4.7.0(19)

Tested with Release 8.5.1

LifeSize


Passport

H.323

OK

OK

OK

Y

LS_PP1_4.8.0(59)

Tested with Release 8.5.2

SIP

OK

OK

OK

Y

LS_PP1_4.8.0(59)

Tested with Release 8.5.2

Compatibility Test Results with the Express Media Server

Following are the test results for video endpoint compatibility when using Cisco Unified MeetingPlace Release 8.5 with an Express Media Server (EMS).


For Cisco applications, the availability of High Definition (HD) video depends on the version of your Cisco application and video camera. For example:

  • Cisco Unified Personal Communicator Release 7.0 does not support HD video.
  • Cisco Unified Personal Communicator Release 8.0 supports HD video if you are using an HD video camera and a quad-core PC.
  • Cisco UC Integration for Microsoft Office Communicator Release 7.0 does not support video.
  • Cisco UC Integration for Microsoft Office Communicator Release 8.0 supports HD video if you are using an HD video camera and a quad-core PC.


Manufacturer/Brand Model/Series Protocol Device Type (1) Dial In Dial Out Direct to Meeting Version Tested Notes
Cisco Cius SIP


H.263

Audio only

Audio only

Audio only

9-1-1CM-709 Tested with Release 8.5.2

H.264 Level 1.1

OK

OK

OK

H.264 Level 1.3

OK

OK

OK

H.264 Level 3.0

OK

OK

OK

H.264 Level 3.1

OK

OK

OK

Cisco


Jabber


SIP


H.263

NA

NA

NA

8.0.1.17215 Tested with Release 8.5.2


Video is not supported in this version of Jabber

H.264 Level 1.1

NA

NA

NA

H.264 Level 1.3

NA

NA

NA

H.264 Level 3.0

NA

NA

NA

H.264 Level 3.1

NA

NA

NA

Cisco Cisco Unified IP Phone 8941 SIP


H.263

Audio only

Audio only

Audio only

9.1.2(SCCP 9-1-2-00) Tested with Release 8.5.2


H.264 Level 1.1

OK

OK

OK

H.264 Level 1.3

OK

OK

OK

H.264 Level 3.0

Audio only

Audio only

Audio only

H.264 Level 3.1

Audio only

Audio only

Audio only

Cisco


Cisco Unified IP Phone 6941


SIP


H.263

Audio only

Audio only

Audio only

sip69xx.9-1-1-3-sr.zz Tested with Release 8.5.2

H.264 Level 1.1

Audio only

Audio only

Audio only

H.264 Level 1.3

Audio only

Audio only

Audio only

H.264 Level 3.0

Audio only

Audio only

Audio only

H.264 Level 3.1

Audio only

Audio only

Audio only

Cisco


Cisco Unified IP Phone 6941


SCCP


H.263

Audio only

Audio only

Audio only

SCCP 9.2.1.0 Tested with Release 8.5.2


This is an audio only endpoint

H.264 Level 1.1

Audio only

Audio only

Audio only

H.264 Level 1.3

Audio only

Audio only

Audio only

H.264 Level 3.0

OK

Audio only

Audio only

H.264 Level 3.1

Audio only

Audio only

Audio only

Cisco


Cisco Unified IP Phone 9951


Cisco Unified IP Phone 9971


SIP


H.263

NA

NA

NA

(Release 8.5.2) sip99xx.9-2-1


(Release 8.5.1) sip9951/71.9-1-1

H.263 not supported

H.264 Level 1.1

OK

OK

OK

-

H.264 Level 1.3

OK

OK

OK

-

H.264 Level 3.0

OK

OK

OK

-

H.264 Level 3.1

Audio only

Audio only

Audio only

-

Cisco


Cisco IP Phone 7985


SCCP

H.263

OK

OK

OK

cmterm_7985.4-1-7-0 Transmits SIF video resolution inside mobile conference

H.264 Level 1.1

OK

OK

OK

H.264 Level 1.3

OK

OK

OK

H.264 Level 3.0

Audio only

Audio only

Audio only

H.264 Level 3.1

Audio only

Audio only

Audio only

Cisco


Cisco IP Phone 7985


SIP

H.263

OK

OK

OK

cmterm_7985.4-1-7-0 Transmits SIF video resolution inside mobile conference

H.264 Level 1.1

OK

OK

OK

H.264 Level 1.3

OK

OK

OK

H.264 Level 3.0

Audio only

Audio only

Audio only

H.264 Level 3.1

Audio only

Audio only

Audio only


Cisco Cisco Unified Video Advantage and Cisco IP Communicator/79XX IP Phones


SCCP

H.263

OK

OK

OK

2.2.1.7 and 7.0.5.0 Tested with both Release 8.5.1 and 8.5.2


H.264 Level 1.1

OK

OK

OK

H.264 Level 1.3

OK

OK

OK

H.264 Level 3.0

Audio only

Audio only

Audio only

H.264 Level 3.1

Audio only

Audio only

Audio only

Cisco Cisco Unified Video Advantage and Cisco Unified IP Phone 9971 SIP


H.263

NA

NA

NA

(Release 8.5.2) 2.2.1.7 and sip9971.9-2-1


(Release 8.5.1) 2.2.1.7 and sip9971.9-1-1

H.263 not supported

H.264 Level 1.1

OK

OK

OK

-

H.264 Level 1.3

OK

OK

OK

-

H.264 Level 3.0

Audio only

Audio only

Audio only

-

H.264 Level 3.1

Audio only

Audio only

Audio only

-

Cisco


Cisco Unified Personal Communicator (CUPC) 7.x SIP


H.263

OK

OK

OK

(Release 8.5.2) 7.1(1.13893)


(Release 8.5.1) 7.1(1.13949)


Tested with both Release 8.5.1 and 8.5.2

H.264 Level 1.1

OK

OK

OK

H.264 Level 1.3

OK

OK

OK

H.264 Level 3.0

Audio only

Audio only

Audio only

H.264 Level 3.1

Audio only

Audio only

Audio only

Cisco


Cisco Unified Personal Communicator (CUPC) 8.x SIP


H.263

NA

NA

NA

8.5.1.18395-6.2.9, CSF 8.5(3)-4.3.29


Tested with Release 8.5.2

H.264 Level 1.1

OK

OK

OK

9.5.1.18395-6.2.9, CSF 8.5(3)-4.3.29

H.264 Level 1.3

OK

OK

OK

10.5.1.18395-6.2.9, CSF 8.5(3)-4.3.29

H.264 Level 3.0

OK

OK

OK

11.5.1.18395-6.2.9, CSF 8.5(3)-4.3.29

H.264 Level 3.1

OK

OK

OK

12.5.1.18395-6.2.9,CSF 8.5(3)-4.3.29

Cisco


Cisco UC Integration for Microsoft Office Communicator


SIP


H.263

NA

NA

NA

8.5.84.16222, CSF 8.5(1)-4.0.8

H.263 not supported


Tested with Release 8.5.1

H.264 Level 1.1

OK

OK

OK

Tested with Release 8.5.1

H.264 Level 1.3

OK

OK

OK

Tested with Release 8.5.1

H.264 Level 3.0

OK

OK

OK

Tested with Release 8.5.1

H.264 Level 3.1

OK

OK

OK

Tested with Release 8.5.1


Cisco


Cisco UC Integration for Microsoft Lync SIP


H.263

NA

NA

NA

8.5(105.17095), CSF 8.5(1)-4.0.12

H.263 not supported


Tested with Release 8.5.2

H.264 Level 1.1

OK

OK

OK

Tested with Release 8.5.2

H.264 Level 1.3

OK

OK

OK


Tested with Release 8.5.2

H.264 Level 3.0

OK

OK

OK


Recommendation is to set "Show my video automatically"


Tested with Release 8.5.2

H.264 Level 3.1

OK

OK

OK


Tested with Release 8.5.2

Cisco


Cisco TelePresence System EX 90 SIP


H.263

OK

OK

OK

TC5.0 Tested with Release 8.5.2


H.264 Level 1.1

OK

OK

OK

H.264 Level 1.3

OK

OK

OK

H.264 Level 3.0

Audio only

Audio only

Audio only

H.264 Level 3.1

Audio only

Audio only

Audio only

Cisco


Cisco TelePresence System Quick Set C20 SIP


H.263

OK

OK

OK

TC5.0 Tested with Release 8.5.2

H.264 Level 1.1

OK

OK

OK

H.264 Level 1.3

OK

OK

OK

H.264 Level 3.0

Audio only

Audio only

Audio only

H.264 Level 3.1

Audio only

Audio only

Audio only

Cisco


Cisco IP Video Phone E20


SIP


H.263

OK

OK

OK

(Release 8.5.2) TE4.0.0RC5


(Release 8.5.1) TE4.0.0RC1


Tested with both Release 8.5.1 and 8.5.2

H.264 Level 1.1

OK

OK

OK

H.264 Level 1.3

OK

OK

OK

H.264 Level 3.0

Audio only

Audio only

Audio only

H.264 Level 3.1

Audio only

Audio only

Audio only

Cisco


Cisco TelePresence Movi SIP


H.263

OK

OK

OK

4.1 Tested with Release 8.5.2

H.264 Level 1.1

OK

OK

OK

H.264 Level 1.3

OK

OK

OK

H.264 Level 3.0

OK

OK

OK

H.264 Level 3.1

OK

OK

OK

Cisco


Cisco TelePresence System 1100 SIP


H.263

NA

NA

NA

CTS_1.7.4(256)_P1 Tested with Release 8.5.2

H.264 Level 1.1

OK

OK

OK

H.264 Level 1.3

OK

OK

OK

H.264 Level 3.0

OK

OK

OK

H.264 Level 3.1

Fail

Fail

Fail

Cisco


Cisco TelePresence 1700 MXP


H.323


H.263

OK

OK

OK

(Release 8.5.2) F9.0.2 PAL


(Release 8.5.1) F8.2 PAL

-

H.264 Level 1.1

OK

OK

OK


-

H.264 Level 1.3

Audio only

(Release 8.5.2) Audio only


(Release 8.5.1) OK

(Release 8.5.2) Audio only


(Release 8.5.1) OK


-

H.264 Level 3.0

Audio only

Audio only

Audio only


-

H.264 Level 3.1

Audio only

Audio only

Audio only


-

Cisco


Cisco TelePresence 1700 MXP


SIP


H.263

(Release 8.5.2) Audio only


(Release 8.5.1) OK

OK

OK


(Release 8.5.2) F9.0.2 PAL


(Release 8.5.1) F8.2 PAL

-

H.264 Level 1.1

(Release 8.5.2) Audio only


(Release 8.5.1) OK

OK

OK


-

H.264 Level 1.3

(Release 8.5.2) Audio only


(Release 8.5.1) OK

OK

OK


-

H.264 Level 3.0

Audio only

Audio only

Audio only


-

H.264 Level 3.1

Audio only

Audio only

Audio only


-

Polycom


VSX 3000A


H.323


H.263

(Release 8.5.2) Audio only


(Release 8.5.1) Fail

OK

OK

9.0.6.1

-

H.264 Level 1.1

(Release 8.5.2) Audio only


(Release 8.5.1) Fail

OK

OK


Transmits CIF resolution inside mobile conference

H.264 Level 1.3

(Release 8.5.2) Audio only


(Release 8.5.1) Fail

Audio only

Audio only


(Release 8.5.1) Regarding failed test, dial in-endpoint is able to dial in but it is eventually thrown out of the conference. Check CSCtl01234. This is fixed for CUCM 8.6.

H.264 Level 3.0

(Release 8.5.2) Audio only


(Release 8.5.1) Fail

Audio only

Audio only

-

H.264 Level 3.1

(Release 8.5.2) Audio only


(Release 8.5.1) Fail

Audio only

Audio only


-

Polycom


VSX 3000A


SIP


H.263

Fail

OK

OK

9.0.6.1


Endpoint should be configured as video terminal

H.264 Level 1.1

Fail

(Release 8.5.2) Audio only


(Release 8.5.1) OK

Audio only

H.264 Level 1.3

Fail

Audio only

Audio only


H.264 Level 3.0

Fail

Audio only

Audio only

H.264 Level 3.1

Fail

Audio only

Audio only

LifeSize


Passport


H.323


H.263

OK

OK

OK

(Release 8.5.2) LS_PP1_4.8.0(59)


(Release 8.5.1) LS_PP1_4.7.0 (19)

-

H.264 Level 1.1

OK

OK

OK


Transmits CIF resolution inside mobile conference

H.264 Level 1.3

OK

OK

OK


-

H.264 Level 3.0

OK

(Release 8.5.2) OK


(Release 8.5.1) Audio only

OK


-

H.264 Level 3.1

Audio only

OK

OK


-

LifeSize


Passport


SIP


H.263

(Release 8.5.2) Fail


(Release 8.5.1) OK

(Release 8.5.2) Fail


(Release 8.5.1) OK

OK

(Release 8.5.2) LS_PP1_4.8.0(59)


(Release 8.5.1) LS_PP1_4.7.0 (19)

-

H.264 Level 1.1

(Release 8.5.2) Fail


(Release 8.5.1) OK

(Release 8.5.2) Fail


(Release 8.5.1) OK

OK


Transmits CIF resolution inside mobile conference

H.264 Level 1.3

(Release 8.5.2) Fail


(Release 8.5.1) OK

(Release 8.5.2) Fail


(Release 8.5.1) OK

OK


-

H.264 Level 3.0

(Release 8.5.2) Fail


(Release 8.5.1) OK

(Release 8.5.2) Fail


(Release 8.5.1) OK

OK


-

H.264 Level 3.1

(Release 8.5.2) Fail


(Release 8.5.1) OK

(Release 8.5.2) Fail


(Release 8.5.1) OK

Audio only

Works with Cisco Unified Communications Manager (CUCM) 8.5 and 8.0.

If registered with CUCM 8.6, endpoint is not able to send digits inside the conference. In order to enter the conference, configure endpoint as Video Terminal and use the "Direct to meeting" option.



(1) H.264 Level 1.1 = Mobile mode, H.264 Level 1.3 = Desktop mode, H.264 Level 3.0 = VGA mode, H.264 Level 3.1 = High Definition mode


Related Topics

Terminology Used in Video Endpoint Compatibility Test Results

The following table describes the terminology used in Table: Video Endpoints Compatible with Cisco Unified MeetingPlace Release 8.5 and HMS and Table: Video Endpoints Compatible with Cisco Unified MeetingPlace Release 8.5 and EMS.


Terminology Description
Test

Dial In

Tested dialing in to Cisco Unified MeetingPlace.

Dial Out

Tested dialing out from Cisco Unified MeetingPlace by using a web browser command or by using the TUI command #31.

Direct to Meeting

Tested dialing out from Cisco Unified MeetingPlace using the scheduled "direct to meeting" mode. The process was to configure a video terminal profile for outdial to terminal, tell the video terminal to skip the meeting entry prompts on outdial, and then invite the terminal to the meeting.

4CIF

Tested whether the terminal worked when tested with 4CIF using H.263.

Result

OK

The terminal was able to enter a meeting using video.

No video

The terminal was able to enter a meeting, but without video or with one-way video.

Fail

The terminal was not able to enter a meeting. The failure may have been at initial connection or at meeting entry.

"-"

The terminal was not tested in this mode.


Video Format Support

Table: Supported Video Formats lists the supported video formats for various combinations of the global video mode and the codec used by the video terminal.


Note: If Cisco Unified Communications Manager causes the connection rate to be lower than the maximum for your global video mode setting (384 kbps for standard rate, 2 Mbps for high rate), then the resolution or frames per second sent by Cisco Unified MeetingPlace may be reduced.


Global Video Mode Codec Video Format Frames per Second
High rate (2 Mbps maximum)


H.264

CIF, QCIF

30

H.263

4CIF

15

H.263

CIF, QCIF

30

H.261

CIF, QCIF

30

Standard rate (384 kbps maximum)


H.264

CIF

15

H.264

QCIF

30

H.263

CIF, QCIF

30

Rating: 5.0/5 (1 vote cast)

Retrieved from "http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.5_--_Compatibility_Matrix"
Personal tools