Cisco Unified MeetingPlace Release 8.5 -- Choosing an Audio Without Video Deployment for Cisco Unified MeetingPlace Release 8.5

From DocWiki

(Difference between revisions)
Jump to: navigation, search
(Using Cisco Unified Communications Manager Release 6.1.5)
m (1 revision)

Revision as of 17:34, 1 June 2011

Main page: Cisco Unified MeetingPlace Release 8.5

Up one level: Planning Your Deployment


This module discusses design considerations and recommendations for Cisco Unified MeetingPlace Release 8.5 deployments that do not include video. These deployments may or may not include a web component. If you want to use video in your deployment, see Choosing an Audio and Video Deployment for Cisco Unified MeetingPlace Release 8.5.


This chapter does not include a comprehensive list of all possible audio without video deployments but instead describes common scenarios.

Contents

About Audio Without Video Deployments

All Cisco Unified MeetingPlace Release 8.5 systems require Cisco Unified Communications Manager. For audio without video deployments, the earliest release of Cisco Unified Communications Manager that we support is Release 6.1.5.


Cisco Unified MeetingPlace Release 8.5 has two audio without video deployment options and both use Cisco Unified Communications Manager to support MGCP (Media Gateway Control Protocol), H.323, SCCP, and SIP gateways. Note that Cisco Unified MeetingPlace Release 8.5 interoperates with all third-party, standards-based IP PBXs; however, we have only tested deployments with Cisco Unified Communications Manager.

Related Topics



Using Cisco Unified Communications Manager Release 6.1.5

Note: This deployment refers to the following releases of Cisco Unified Communications Manager that are supported by Cisco Unified MeetingPlace Release 8.5. See Compatibility Matrix for details.

  • 6.1.5
  • 7.x
  • 8.x


Cisco Unified Communications Manager is required if you want directory synchronization. Using Cisco Unified Communications Manager does not limit your endpoint choices in any way. Video terminals may connect to Cisco Unified MeetingPlace; however, the connection is audio only.


The following is the call path for this deployment option:

  1. SIP or SCCP (voice or video) endpoint
  2. Cisco Unified Communications Manager Release 6.1.5
  3. SIP trunk
  4. Cisco Unified MeetingPlace


Example 1
  1. Phone
  2. PSTN
  3. IOS gateway
  4. Cisco Unified Communications Manager Release 7.x
  5. SIP trunk
  6. Cisco Unified MeetingPlace
Example 2
  1. Phone
  2. IOS gatekeeper
  3. Cisco Unified Communications Manager Release 8.x
  4. SIP trunk
  5. Cisco Unified MeetingPlace

Reservationless Single Number Access (RSNA) Functionality

Note: Reservationless Single Number Access (RSNA) functionality is replaced with the multinode configuration in Release 8.5. If you want RSNA functionality, we recommend you install a multinode system with Cisco WebEx scheduling. For more information, see Planning a Multinode Deployment.

Rating: 1.0/5 (1 vote cast)

Personal tools