Cisco Unified MeetingPlace Release 8.0 -- Password Recovery for the Cisco Unified MeetingPlace Application Server

From DocWiki

(Difference between revisions)
Jump to: navigation, search
m (1 revision)
m (removed /root/.security/unimmunize.sh., /root/.security/immunize.sh. as per comments from TAC)
Line 12: Line 12:
== Recovering the Password for the root Account on the Application Server ==
== Recovering the Password for the root Account on the Application Server ==
-
 
Use this procedure to recover or change the [[Cisco Unified MeetingPlace Release 8.0 -- Using the Command-Line Interface (CLI) on the Cisco Unified MeetingPlace Application Server#root|root]] user level password, which is initially set during the Application Server installation.  
Use this procedure to recover or change the [[Cisco Unified MeetingPlace Release 8.0 -- Using the Command-Line Interface (CLI) on the Cisco Unified MeetingPlace Application Server#root|root]] user level password, which is initially set during the Application Server installation.  
Line 18: Line 17:
===== Procedure =====
===== Procedure =====
-
 
# Reboot your server.  
# Reboot your server.  
Line 29: Line 27:
# Press '''Enter''' to return the previous screen. The third entry should have the word single at the end.  
# Press '''Enter''' to return the previous screen. The third entry should have the word single at the end.  
# Press '''b''' to continue rebooting the server.  
# Press '''b''' to continue rebooting the server.  
-
# At the prompt, enter '''/root/.security/unimmunize.sh'''.
 
# At the prompt, enter '''passwd root'''.   
# At the prompt, enter '''passwd root'''.   
#: This tells the server to set a new password for the user called root.
#: This tells the server to set a new password for the user called root.
Line 36: Line 33:
#: '''Note: ''' You might see a message that the password you entered is bad. Ignore this message.
#: '''Note: ''' You might see a message that the password you entered is bad. Ignore this message.
# At the Retype new password: prompt, re-enter the same password.  
# At the Retype new password: prompt, re-enter the same password.  
-
# At the prompt, enter '''/root/.security/immunize.sh'''.
 
# At the prompt, enter '''reboot'''. This reboots the server.  
# At the prompt, enter '''reboot'''. This reboots the server.  
#: The system displays the Cisco Unified MeetingPlace operating system sign-in page.
#: The system displays the Cisco Unified MeetingPlace operating system sign-in page.
# At the username prompt, enter '''root'''.  
# At the username prompt, enter '''root'''.  
-
# At the password prompt, enter the new password that you created in [[Cisco Unified MeetingPlace Release 8.0 -- Password Recovery for the Cisco Unified MeetingPlace Application Server#Step 10|Step 10]].  
+
# At the password prompt, enter the new password that you created in Step 9.  
#: The system displays the Cisco Unified MeetingPlace operating system desktop.
#: The system displays the Cisco Unified MeetingPlace operating system desktop.
Line 46: Line 42:
== Recovering the Password for the mpxadmin Account on the Application Server ==
== Recovering the Password for the mpxadmin Account on the Application Server ==
-
 
Use this procedure to recover or change the [[Cisco Unified MeetingPlace Release 8.0 -- Using the Command-Line Interface (CLI) on the Cisco Unified MeetingPlace Application Server#mpxadmin|mpxadmin]] user level password, which is initially set during Application Server installation.
Use this procedure to recover or change the [[Cisco Unified MeetingPlace Release 8.0 -- Using the Command-Line Interface (CLI) on the Cisco Unified MeetingPlace Application Server#mpxadmin|mpxadmin]] user level password, which is initially set during Application Server installation.
Line 52: Line 47:
===== Procedure =====
===== Procedure =====
-
 
# Sign in to the Application Server CLI as the root user.  
# Sign in to the Application Server CLI as the root user.  
-
# Enter '''/root/.security/unimmunize.sh'''.
 
# Enter '''passwd mpxadmin'''.   
# Enter '''passwd mpxadmin'''.   
#: This tells the server to set a new password for the mpxadmin user.
#: This tells the server to set a new password for the mpxadmin user.
Line 61: Line 54:
#: '''Note: ''' You might see a message that the password you entered is bad. Ignore this message.
#: '''Note: ''' You might see a message that the password you entered is bad. Ignore this message.
# Re-enter the same password when prompted.  
# Re-enter the same password when prompted.  
-
# Enter '''/root/.security/immunize.sh'''.
 
# On the desktop, select the Red Hat icon.  
# On the desktop, select the Red Hat icon.  
# Select '''Log Out'''.  
# Select '''Log Out'''.  
Line 73: Line 65:
== Recovering the User Password for the Preconfigured Admin Profile ==
== Recovering the User Password for the Preconfigured Admin Profile ==
-
 
This task describes how to use the [[Cisco Unified MeetingPlace Release 8.0 -- Using the Command-Line Interface (CLI) on the Cisco Unified MeetingPlace Application Server#userutil|userutil]] command to reset the User password for the preconfigured [[Cisco Unified MeetingPlace Release 8.0 -- Configuring User Profiles and User Groups for Cisco Unified MeetingPlace#Admin Profile|Admin Profile]].  
This task describes how to use the [[Cisco Unified MeetingPlace Release 8.0 -- Using the Command-Line Interface (CLI) on the Cisco Unified MeetingPlace Application Server#userutil|userutil]] command to reset the User password for the preconfigured [[Cisco Unified MeetingPlace Release 8.0 -- Configuring User Profiles and User Groups for Cisco Unified MeetingPlace#Admin Profile|Admin Profile]].  
Line 79: Line 70:
===== Procedure =====
===== Procedure =====
-
 
# Sign in to the Application Server CLI as the mpxadmin user.  
# Sign in to the Application Server CLI as the mpxadmin user.  

Revision as of 16:15, 10 January 2011

Main page: Cisco Unified MeetingPlace, Release 8.0

Up one level: Troubleshooting



Contents

Recovering the Password for the root Account on the Application Server

Use this procedure to recover or change the root user level password, which is initially set during the Application Server installation.


Procedure
  1. Reboot your server.
  2. Quickly press the spacebar when the words "GRUB" and "Cisco Unified Communications" appear on the screen.
    Note: You have only three seconds to press the spacebar after this text appears. If you miss this window of time, return to Step 1.
  3. The system displays three options. Use the up and down arrow keys to highlight the third entry. It starts with "kernel."
  4. Press e to edit the entry.
  5. At the end of the entry, enter a space and then single.
    Note: You must type a space before you type single.
  6. Press Enter to return the previous screen. The third entry should have the word single at the end.
  7. Press b to continue rebooting the server.
  8. At the prompt, enter passwd root.
    This tells the server to set a new password for the user called root.
  9. At the New password: prompt, enter a new password.
    For security purposes, the password is displayed as a series of asterisks.
    Note: You might see a message that the password you entered is bad. Ignore this message.
  10. At the Retype new password: prompt, re-enter the same password.
  11. At the prompt, enter reboot. This reboots the server.
    The system displays the Cisco Unified MeetingPlace operating system sign-in page.
  12. At the username prompt, enter root.
  13. At the password prompt, enter the new password that you created in Step 9.
    The system displays the Cisco Unified MeetingPlace operating system desktop.


Recovering the Password for the mpxadmin Account on the Application Server

Use this procedure to recover or change the mpxadmin user level password, which is initially set during Application Server installation.


Procedure
  1. Sign in to the Application Server CLI as the root user.
  2. Enter passwd mpxadmin.
    This tells the server to set a new password for the mpxadmin user.
  3. Enter the new password when prompted.
    Note: You might see a message that the password you entered is bad. Ignore this message.
  4. Re-enter the same password when prompted.
  5. On the desktop, select the Red Hat icon.
  6. Select Log Out.
  7. Select OK.


Related Topics


Recovering the User Password for the Preconfigured Admin Profile

This task describes how to use the userutil command to reset the User password for the preconfigured Admin Profile.


Procedure
  1. Sign in to the Application Server CLI as the mpxadmin user.
  2. Enter userutil -p admin new-password.
  3. On the desktop, select the Red Hat icon.
  4. Select Log Out.
  5. Select OK.


Related Topics

Rating: 0.0/5 (0 votes cast)

Personal tools