Sutibbet: /* About SNMP on the Application Server */

2013-04-15T05:44:30Z

About SNMP on the Application Server

← Older revision		Revision as of 05:44, 15 April 2013
Line 19:		Line 19:

	== About SNMP on the Application Server ==		== About SNMP on the Application Server ==
-	* SNMP versions ~~1 and~~ 2c ~~are supported. SNMP version~~ 3 ~~is ''not''~~ supported.	+	* SNMP versions 2c and 3 are supported.
	* All standard MIB II queries and a set of Cisco Unified MeetingPlace MIB traps are supported.		* All standard MIB II queries and a set of Cisco Unified MeetingPlace MIB traps are supported.
	: The MIB II queries include the Cisco Unified MeetingPlace Application Server name, location, contact name, and statistics regarding the network interface.		: The MIB II queries include the Cisco Unified MeetingPlace Application Server name, location, contact name, and statistics regarding the network interface.
Line 120:		Line 120:
	* ''Alarm and Exception Code Reference for Cisco Unified MeetingPlace'' at http://www.cisco.com/en/US/products/sw/ps5664/ps5669/prod_technical_reference_list.html		* ''Alarm and Exception Code Reference for Cisco Unified MeetingPlace'' at http://www.cisco.com/en/US/products/sw/ps5664/ps5669/prod_technical_reference_list.html
	* [[Cisco Unified MeetingPlace Release 8.0 -- Using Alarms and Logs on Cisco Unified MeetingPlace#Alarm Severity Levels\|Alarm Severity Levels]] in the [[Cisco Unified MeetingPlace Release 8.0 -- Using Alarms and Logs on Cisco Unified MeetingPlace#Using Alarms and Logs on Cisco Unified MeetingPlace\|Using Alarms and Logs on Cisco Unified MeetingPlace]] module		* [[Cisco Unified MeetingPlace Release 8.0 -- Using Alarms and Logs on Cisco Unified MeetingPlace#Alarm Severity Levels\|Alarm Severity Levels]] in the [[Cisco Unified MeetingPlace Release 8.0 -- Using Alarms and Logs on Cisco Unified MeetingPlace#Using Alarms and Logs on Cisco Unified MeetingPlace\|Using Alarms and Logs on Cisco Unified MeetingPlace]] module
-	* [[Cisco Unified MeetingPlace Release 8.0 -- Using Alarms and Logs on Cisco Unified MeetingPlace#Using Alarms and Logs on Cisco Unified MeetingPlace\|Using Alarms and Logs on Cisco Unified MeetingPlace]] module	+	* [[Cisco Unified MeetingPlace Release 8.0 -- Using Alarms and Logs on Cisco Unified MeetingPlace#Using Alarms and Logs on Cisco Unified MeetingPlace\|Using Alarms and Logs on Cisco Unified MeetingPlace]] module
-		+
-		+

	== Requirements for SNMP on the Application Server ==		== Requirements for SNMP on the Application Server ==

Dpetrovi: /* Requirements for SNMP on the Application Server */

2013-01-29T18:17:02Z

Requirements for SNMP on the Application Server

← Older revision		Revision as of 18:17, 29 January 2013
Line 135:		Line 135:


-	You can download these MIB files from ftp://ftp~~-sj~~.cisco.com/pub/mibs/v2/.	+	You can download these MIB files from ftp://ftp.cisco.com/pub/mibs/v2/.
-		+
-		+

	== How To Configure SNMP on the Application Server ==		== How To Configure SNMP on the Application Server ==

MeetingPlace Moderator: 1 revision

2010-07-02T16:54:50Z

1 revision

← Older revision

Revision as of 16:54, 2 July 2010

MeetingPlace Moderator: /* Related Topics */

2010-06-30T17:34:03Z

Related Topics

New page

'''Main page:''' [[Cisco Unified MeetingPlace, Release 8.0]]

'''Up one level:''' [[Cisco Unified MeetingPlace Release 8.0 -- Configuration|Configuration]]

'''Note: ''' This module applies only to the Application Server. For information about the other Cisco Unified MeetingPlace servers which support SNMP, see the following:
* [[Cisco Unified MeetingPlace Release 8.0 -- Configuring the Hardware Media Server Using the MSA Interface#How to Configure Alert Indications for the Hardware Media Server|How to Configure Alert Indications for the Hardware Media Server]] in the [[Cisco Unified MeetingPlace Release 8.0 -- Configuring the Hardware Media Server Using the MSA Interface#Configuring the Hardware Media Server Using the MSA Interface|Configuring the Hardware Media Server Using the MSA Interface]] module

Topics in this module include:
* [[Cisco Unified MeetingPlace Release 8.0 -- Configuring SNMP on the Cisco Unified MeetingPlace Application Server#About SNMP on the Application Server|About SNMP on the Application Server]]
* [[Cisco Unified MeetingPlace Release 8.0 -- Configuring SNMP on the Cisco Unified MeetingPlace Application Server#Requirements for SNMP on the Application Server|Requirements for SNMP on the Application Server]]
* [[Cisco Unified MeetingPlace Release 8.0 -- Configuring SNMP on the Cisco Unified MeetingPlace Application Server#How To Configure SNMP on the Application Server|How To Configure SNMP on the Application Server]]

== About SNMP on the Application Server ==
* SNMP versions 1 and 2c are supported. SNMP version 3 is ''not'' supported.
* All standard MIB II queries and a set of Cisco Unified MeetingPlace MIB traps are supported.
: The MIB II queries include the Cisco Unified MeetingPlace Application Server name, location, contact name, and statistics regarding the network interface.
* Traps are used to report events. See [[Cisco Unified MeetingPlace Release 8.0 -- Configuring SNMP on the Cisco Unified MeetingPlace Application Server#Table: SNMP Traps for the Application Server|Table: SNMP Traps for the Application Server]].
: Each major and minor software notification includes an integer exception code and indicates which software module and server reported the alarm. Normally, each alarm instance generates a separate notification. In some cases, however, one specific incident could trigger multiple types of alarms.

===== Table: SNMP Traps for the Application Server =====

{| border = 1
|-
!Name
!OID (1)
!Comment
|-
|colspan="3" rowspan="1"|''' Trap Types '''
|-
|

Major Software Alarm
|

.1.3.6.1.4.1.7185.3.1.3.0.5
|

Generated any time Cisco Unified MeetingPlace reports a major software alarm.
|-
|

Minor Software Alarm
|

.1.3.6.1.4.1.7185.3.1.3.0.6
|

Generated any time Cisco Unified MeetingPlace reports a minor hardware alarm.
|-
|colspan="3" rowspan="1"|''' Trap Message Content'''
|-
|

SystemUpTime
|

1.3.6.1.2.1.1.3.0
|

Counter for actual Application Server uptime.
|-
|

Trap Type
|

-
|

See [[Cisco Unified MeetingPlace Release 8.0 -- Configuring SNMP on the Cisco Unified MeetingPlace Application Server#Trap Types|Trap Types]].
|-
|

Exception Code
|

1.3.6.1.4.1.7185.3.1.3.1
|

Primary code associated with each Cisco Unified MeetingPlace exception condition.
|-
|

SwSys Unit
|

1.3.6.1.4.1.7185.3.1.3.2
|

Unit number of the Cisco Unified MeetingPlace server that reported the exception.

Corresponds to the [[Cisco Unified MeetingPlace Release 8.0 -- Administration Center Page References for Cisco Unified MeetingPlace#Unit|Unit]] number used by the Cisco Unified MeetingPlace Gateway System Integrity Manager (Gateway SIM) to identify the server.
|-
|

Alarm Description
|

1.3.6.1.4.1.7185.3.1.3.7
|

One-line text description of the exception condition. It comprises a string indexed by the exception code filled in with context-specific values.
|}

Footnote 1: OID = Object Identifier

===== Related Topics =====
* ''Alarm and Exception Code Reference for Cisco Unified MeetingPlace'' at http://www.cisco.com/en/US/products/sw/ps5664/ps5669/prod_technical_reference_list.html
* [[Cisco Unified MeetingPlace Release 8.0 -- Using Alarms and Logs on Cisco Unified MeetingPlace#Alarm Severity Levels|Alarm Severity Levels]] in the [[Cisco Unified MeetingPlace Release 8.0 -- Using Alarms and Logs on Cisco Unified MeetingPlace#Using Alarms and Logs on Cisco Unified MeetingPlace|Using Alarms and Logs on Cisco Unified MeetingPlace]] module
* [[Cisco Unified MeetingPlace Release 8.0 -- Using Alarms and Logs on Cisco Unified MeetingPlace#Using Alarms and Logs on Cisco Unified MeetingPlace|Using Alarms and Logs on Cisco Unified MeetingPlace]] module

== Requirements for SNMP on the Application Server ==

Import these non-standard MIBs into your network management server or SNMP monitoring package:
* '''CISCO-CDP-MIB.my''': Cisco Discovery Protocol
* '''CISCO-SMI.my''': Cisco Enterprise Structure of Management Information
* '''CISCO-TC.my''': Cisco MIB Textual Conventions
* '''CISCO-VTP-MIB.my''': Cisco Voice Technology Protocol MIB
* '''CISCO-LATITUDE-MIB.my''': Cisco Latitude MIB

You can download these MIB files from ftp://ftp-sj.cisco.com/pub/mibs/v2/.

== How To Configure SNMP on the Application Server ==
* [[Cisco Unified MeetingPlace Release 8.0 -- Configuring SNMP on the Cisco Unified MeetingPlace Application Server#Adding or Editing SNMP Community Strings|Adding or Editing SNMP Community Strings]]
* [[Cisco Unified MeetingPlace Release 8.0 -- Configuring SNMP on the Cisco Unified MeetingPlace Application Server#Displaying or Deleting SNMP Community Strings|Displaying or Deleting SNMP Community Strings]]
* [[Cisco Unified MeetingPlace Release 8.0 -- Configuring SNMP on the Cisco Unified MeetingPlace Application Server#Adding or Editing SNMP Notification Destinations|Adding or Editing SNMP Notification Destinations]]
* [[Cisco Unified MeetingPlace Release 8.0 -- Configuring SNMP on the Cisco Unified MeetingPlace Application Server#Displaying or Deleting SNMP Notification Destinations|Displaying or Deleting SNMP Notification Destinations]]

=== Adding or Editing SNMP Community Strings ===

This topic applies only to the Application Server.

===== Before You Begin =====

See the [[Cisco Unified MeetingPlace Release 8.0 -- Configuring SNMP on the Cisco Unified MeetingPlace Application Server#Requirements for SNMP on the Application Server|Requirements for SNMP on the Application Server]].

===== Restrictions =====

Do not disable the default community string, which is called meetingplace-public. Doing so will cause the Application Server to give an SNMP "authentication failure" trap every second.

===== Procedure =====

# Sign in to the Administration Center.
# Select '''Maintenance > SNMP''' > '''Community Strings'''.
# Select '''Add New''' or select an existing entry.
# Enter or change values in the fields.
# Select '''Save'''.

===== Related Topics =====
* [[Cisco Unified MeetingPlace Release 8.0 -- Administration Center Page References for Cisco Unified MeetingPlace (A - C pages)#Table: Field Reference: Add SNMP Community String Page and Edit SNMP Community String Page|Table: Field Reference: Add SNMP Community String Page and Edit SNMP Community String Page]] in the [[Cisco Unified MeetingPlace Release 8.0 -- Administration Center Page References for Cisco Unified MeetingPlace (A - C pages)|Administration Center Page References for Cisco Unified MeetingPlace (A - C pages)]]

=== Displaying or Deleting SNMP Community Strings ===

This topic applies only to the Application Server.

===== Restriction =====

You cannot delete the default community string, which is called meetingplace-public.

Do not disable the default community string, which is called meetingplace-public. Doing so will cause the Application Server to give an SNMP "authentication failure" trap every second.

===== Procedure =====

# Sign in to the Administration Center.
# Select '''Maintenance > SNMP''' > '''Community Strings'''.
# Check the check box next to each community string that you want to delete, or check the topmost check box to select ''all'' community strings.
# Select '''Delete Selected'''.
# Select '''OK'''.

===== Related Topics =====
* [[Cisco Unified MeetingPlace Release 8.0 -- Administration Center Page References for Cisco Unified MeetingPlace (A - C pages)#Table: Fields Reference: Community Strings Page|Table: Fields Reference: Community Strings Page]] in the [[Cisco Unified MeetingPlace Release 8.0 -- Administration Center Page References for Cisco Unified MeetingPlace (A - C pages)|Administration Center Page References for Cisco Unified MeetingPlace (A - C pages)]]

=== Adding or Editing SNMP Notification Destinations ===

This topic applies only to the Application Server.

The system sends a message to the IP address specified in the notification destination whenever a trap or inform condition occurs. A trap reports certain events while an inform condition allows one network management application to send trap information to another.

===== Procedure =====

# Sign in to the Administration Center.
# Select '''Maintenance > SNMP''' > '''Notification Destinations'''.
# Select '''Add New''' or select an existing entry.
# Enter or change the values in the fields.
# Select '''Save'''.

===== Related Topics =====
* [[Cisco Unified MeetingPlace Release 8.0 -- Administration Center Page References for Cisco Unified MeetingPlace (A - C pages)#Table: Field Reference: Add SNMP Notification Destination Page and Edit SNMP Notification Destination Page|Table: Field Reference: Add SNMP Notification Destination Page and Edit SNMP Notification Destination Page]] in the [[Cisco Unified MeetingPlace Release 8.0 -- Administration Center Page References for Cisco Unified MeetingPlace (A - C pages)|Administration Center Page References for Cisco Unified MeetingPlace (A - C pages)]]

=== Displaying or Deleting SNMP Notification Destinations ===

This topic applies only to the Application Server.

===== Procedure =====

# Sign in to the Administration Center.
# Select '''Maintenance > SNMP''' > '''Notification Destinations'''.
# Check the check box next to each notification destination that you want to delete, or check the topmost check box to select ''all'' notification destinations.
# Select '''Delete Selected'''.
# Select '''OK'''.

===== Related Topics =====
* [[Cisco Unified MeetingPlace Release 8.0 -- Administration Center Page References for Cisco Unified MeetingPlace (M - P pages)#Table: Field Reference: Notification Destinations Page|Table: Field Reference: Notification Destinations Page]] in the [[Cisco Unified MeetingPlace Release 8.0 -- Administration Center Page References for Cisco Unified MeetingPlace (M - P pages)|Administration Center Page References for Cisco Unified MeetingPlace (M - P pages)]]

[[Category: Configuration Information for Cisco Unified MeetingPlace Release 8.0]]

Cisco Unified MeetingPlace Release 8.0 -- Configuring SNMP on the Cisco Unified MeetingPlace Application Server - Revision history

Sutibbet: /* About SNMP on the Application Server */

Dpetrovi: /* Requirements for SNMP on the Application Server */

MeetingPlace Moderator: 1 revision

MeetingPlace Moderator: /* Related Topics */